Optoma Technology TW6313D appendix Ceiling mount installation, EN-43

Page 43

Ceiling mount installation

1.To prevent damage to your projector, please use the Optoma ceiling mount.

2.If you wish to use a third party ceiling mount kit, please ensure the screws used to attach a mount to the projector meet the following specifications:

Screw type: M4*3

Maximum screw length: 8mm

Minimum screw length: 6mm

	278.32	29.70
		29.70
		38.50
120.00		139.00	231.50
73.00		54.00
61.70	210.70	12.70
57.94	210.70	12.70
Lens

Unit: mm

Note

Please note that damage resulting from incorrect installation will void the warranty.

Warning

1.If you buy a ceiling mount from another company, please be sure to use the correct screw size. Screw size will vary depending on the thickness of the mounting plate.

2.Be sure to keep at least 10 cm gap between the ceiling and the bottom of the projector.

3.Avoid installing the projector near a heat source.

EN-43

Image 43

Contents Adjusting the Projector Zoom and Focus CONTENTSUsing the Product Connecting Video source devicesUsage Notice Safety InstructionsEN-3 EN-4 Notes on the AC Power CordIntroduction Projector FeaturesPackage Contents Front View Projector Overview9 8 7 Bottom View Rear ViewEN-8 Control Panel Using the Product1 2 3 4 5 Connection Ports Remote Control AV mute 16 Volume+15 Re-SYNC PageEN-13 Installing the BatteriesEN-14 Remote Control OperationEN-15 ConnectionConnecting a computer Connecting a computer or monitorConnecting a monitor EN-17 Connecting Video source devicesTo connect the projector to a Component Video source device Connecting an HDMI source deviceConnecting a Component Video source device To connect the projector to an HDMI source deviceTo connect the projector to an S-Video source device Connecting an S-Video source deviceEN-19 To connect the projector to a composite Video source device Connecting a composite Video source deviceEN-20 Operation Powering On/Off the ProjectorPowering On the Projector Powering Off the ProjectorAdjusting the Projector Zoom and Focus Adjusting the Projector HeightEN-22 EN-23 Adjusting Projection Image SizeXGA model WXGA modelMenu Operation How to operateEN-25 Contrast ImageColor Settings BrightnessThere are many factory presets optimized for various types of images H Position Horizontal Position SignalPhase FrequencyColor Video ImageSound VolumeProjection SettingLamp Time Reset Menu PositionPower mode standby EN-32 Wireless3D Mode 3D Sync InvertLanguage Factory DefaultEN-33 EN-34 Use web browser to control your projectorCategory EN-35Input-Length characters EN-36 Connect you computer to the projectorEN-37 „ Default gateway10.0.50.2545. Click Use the following IP address, and type in as below „ IP address10.0.50.101 „ Subnet mask255.0.0.0EN-38 Crestron RoomView Control ToolEN-39 2. Edit Room 3. Edit Attribute EN-40 4. Edit EventReplacing the Lamp AppendixEN-42 EN-43 Ceiling mount installationComputer Compatibility ModesEN-45 EN-46 VideoRS232 Pin Assignments RS232 Commands and Protocol Function ListEN-48 RS232 Protocol Function ListEN-49 XGA n 0/1/2/3/4 = 43/169-I/169-II/Native/AUTO EN-50Remote control problems TroubleshootingStart-up problems Image problemsTEMP LED Indicator MessagesPOWER Projector StatusFrance Optoma Global OfficesCanada EuropeJapan ScandinaviaLatin America Korea+86-21-62947375 上海市长宁区+86-21-62947376 凯旋路 1205 号 5 楼FCC Notice Regulation & Safety NoticesNotice Shielded cables Disposal instructions Operation conditionsNotice Canadian users Declaration of Conformity for EU countries1 Switch 14 Enter