InFocus IN1503 Startup Screen A, Problem No start up screen, Solution, Result, Correct image

Page 15

Problem

No start up screen

Solution	Result
Plug power cord into the projector	Correct image
press power button
	Startup
	Screen

Only start up screen appears

Startup

Screen

If your computer is using the projector's DisplayLink connector, see the DisplayLink Software User's Guide for troubleshooting information.

Press the Source button activate laptop’s external port

Restart laptop

Computer image projected

Image 15

Contents IN1501, IN1503 Regulatory models P1501, P1503009-1313-02 DISPERINDAG No. 0287/1.824.51/09.03 Canada Declaration of ConformityTrademarks FCC WarningTable of Contents Important Operating Considerations for Safety Online registration Product specificationsAccessories IntroductionConnector panel Table 1 IN1501 Positioning the projectorIN1501 IN1503150/3.8 90/2.355/1.4 66/1.7VGA connection Connecting a computer sourceConnecting power DisplayLink? No start up screen? Get help on page Displaying an imageAdjusting the image What is Aspect Ratio? 43 screen169 screen 43 mode 169 mode Native mode NTSC only VGA connection Connecting a video deviceComposite video connection HDMI 1.3 connectionScreen Save Time Troubleshooting your setupTable 3 Status indicator light behavior and meaning Shutting down the projectorpress power button Problem No start up screenSolution Plug power cord into the projectorBackground and Desktop projected Problem No computer image, just the words “Signal out of range”Only my laptop’s background appears, not the Desktop icons Result Computer image projectedPanel Display Settings tab ProblemSet your computer’s display resolution to the native resolution of the projector Start Settings ControlSquare image Adjust Keystone on keypadAdjust Sharpness in the Basic Picture menu Image not squareImage upside down Turn off Ceiling Mount in Setup menuTurn off Rear Project in Setup menu Adjust color, tint, brightness, contrast in the Basicpresentation does not play on the screen The video embedded in my PowerPointfor video troubleshooting information Startup Screenlamp door “Replace lamp” message appears at startup, lampLamp must be replaced see page won’t turn on, Lamp light is turned onTroubleshooting the remote Using the remote controlUsing the audio Using the projector’s speakersTroubleshooting Audio Using the keypad buttons Optimizing computer images Presentation featuresCustomizing the projector Optimizing video imagesUsing the menus Basic Picture menu Advanced Picture menu Setup menu To change the PIN To enter the PIN at projector startupFactory Reset restores all settings to their default Status and Service menuSource Info a read-only display of current source settings Projector Info a read-only display of current projector settingsViewing a Slide Show Using LitePort IN1503 onlyUsing the LitePort Menu Image File TypesDisplaying PowerPoint Slides Troubleshooting LitePort WARNINGS MaintenanceUsing the security lock Cleaning the lensReplacing the projection lamp Page INDEX NumericsI Image