InFocus IN1503, P1501 manual Using the menus

Page 27

Using the menus

Using the menus

To open the menus, press the Menu button on the keypad or remote. (The menus automatically close after 60 seconds if no buttons are pressed.) Use the arrow buttons to move up and down to highlight the desired menu, then press the Select button.

To change a menu setting, highlight it, press Select, then use the up and down arrow buttons to adjust the value or select an option or turn the feature on or off. Press Select to confirm your changes. Use the arrows to navigate to another setting. When your adjustments are complete, press Menu to access a different menu; press the Menu button at any time to navigate to the higher-level menu and ultimately close the menus.

The menus are grouped by usage:

•The Basic Picture menu provides common image adjustments.

•The Advanced Picture menu provides more complex image adjustments.

•The Setup menu provides set-up type adjustments that are not changed often.

•The Status and Service menu provides information about the projector and source.

keypad navigation buttons

Basic Picture menu

Advanced Picture menu

Setup menu

Status and Service menu

26

Image 27

Contents IN1501, IN1503 Regulatory models P1501, P1503009-1313-02 DISPERINDAG No. 0287/1.824.51/09.03 Canada Declaration of ConformityTrademarks FCC WarningTable of Contents Important Operating Considerations for Safety Online registration Product specificationsAccessories IntroductionConnector panel Table 1 IN1501 Positioning the projectorIN1501 IN1503150/3.8 90/2.355/1.4 66/1.7VGA connection Connecting a computer sourceConnecting power DisplayLink? No start up screen? Get help on page Displaying an imageAdjusting the image What is Aspect Ratio? 43 screen169 screen 43 mode 169 mode Native mode NTSC only VGA connection Connecting a video deviceComposite video connection HDMI 1.3 connectionScreen Save Time Troubleshooting your setupTable 3 Status indicator light behavior and meaning Shutting down the projectorpress power button Problem No start up screenSolution Plug power cord into the projectorBackground and Desktop projected Problem No computer image, just the words “Signal out of range”Only my laptop’s background appears, not the Desktop icons Result Computer image projectedPanel Display Settings tab ProblemSet your computer’s display resolution to the native resolution of the projector Start Settings ControlSquare image Adjust Keystone on keypadAdjust Sharpness in the Basic Picture menu Image not squareImage upside down Turn off Ceiling Mount in Setup menuTurn off Rear Project in Setup menu Adjust color, tint, brightness, contrast in the Basicpresentation does not play on the screen The video embedded in my PowerPointfor video troubleshooting information Startup Screenlamp door “Replace lamp” message appears at startup, lampLamp must be replaced see page won’t turn on, Lamp light is turned onTroubleshooting the remote Using the remote controlUsing the audio Using the projector’s speakersTroubleshooting Audio Using the keypad buttons Optimizing computer images Presentation featuresCustomizing the projector Optimizing video imagesUsing the menus Basic Picture menu Advanced Picture menu Setup menu To change the PIN To enter the PIN at projector startupFactory Reset restores all settings to their default Status and Service menuSource Info a read-only display of current source settings Projector Info a read-only display of current projector settingsViewing a Slide Show Using LitePort IN1503 onlyUsing the LitePort Menu Image File TypesDisplaying PowerPoint Slides Troubleshooting LitePort WARNINGS MaintenanceUsing the security lock Cleaning the lensReplacing the projection lamp Page INDEX NumericsI Image