WIDE Operations
Wide Screen Operation (manual)
With this function, you can select one of six screen sizes.
When viewing videos or digital video discs
1.Press the WIDE button on the remote control.
2.Within 3 seconds ...
Press the WIDE button again.
The screen size switches as follows:
→ NORMAL → ANAMORPHIC → STADIUM → ZOOM → 2.35:1 → 14:9
When a 720P or 1080I signal is input:
ANAMORPHIC ↔ 2.35:1
NORMAL size screen (4:3)
The normal size screen is displayed.
*The picture has the same size as video pictures with a 4 : 3 aspect ratio.
ANAMORPHIC size screen
The image is expanded in the horizontal direction.
*Images compressed in the horizontal direction (“squeezed images”) are expanded in the horizontal direction and displayed on the entire screen with correct linearity. (Normal images are expanded in the horizontal direction.)
STADIUM size screen
The picture is expanded in the horizontal and vertical directions at different ratios.
*Use this for watching normal video programs (4:3) with a wide screen.
ZOOM size screen
The picture is expanded in the horizontal and vertical direction, maintaining the original proportions.
* Use this for theater size (wide) movies, etc.
2.35:1 size screen
Original image 
Information is lost on both sides.
The squeezed film image is expanded to fulfill the entire screen at a ratio of 2.35:1. Black bands do not appear at the top and bottom but information is lost on the left and right margins.
•This feature is available when the input signal is video, component (480I, 480P, 576I, 576P, 720P, 1080I) or RGB (525P or 625P signal from a scan converter).
*If black bands appear on the top and bottom in the full size screen, select the 2.35:1 size screen to avoid phosphor burn- in.
14:9 size screen
The image is displayed at a 14:9 aspect ratio.
*This feature is available when the input signal is video, component (480I, 480P, 576I, 576P) or RGB (525P or 625P signal from a scan converter).
Note:
Do not allow the displayed in 4:3 mode for an extended period. This can cause a phosphor
16