Function Settings Menu
Setting the power management for computer images
This
Example: Turning the power management function on
On “POWER MGT.” of “FUNCTION” menu, select “ON”.
| F U N C T I O N | |
POWER MGT. | : ON | |
INPUT SKIP | : OFF | |
PDP SAVER | : MANUAL | |
CLOSED CAPTION | : OFF | |
CAPTION CONT | : LOW | |
SEL. | ADJ. | EXIT RETURN |
Information
⬛Power management function
*The power management function automatically reduces the monitor’s power consumption if the computer’s keyboard or mouse is not operated for a certain amount of time. This function can be used when using the monitor with a computer.
*If the computer’s power is not turned on or if the computer and selector tuner are not properly connected, the system is set to the off state.
*For instructions on using the computer’s power management function, refer to the computer’s operating instructions.
⬛Power management settings
ON: In this mode the power management function is turned on.
OFF: In this mode the power management function is turned off.
⬛Power management function and POWER/ STANDBY indicator
The POWER/STANDBY indicator indicates the status of the power management function. See below for indicator status and description.
POWER/STANDBY indicator
Power | POWER/ | Power | Description | Turning the picture |
management | STANDBY | management |
| back on |
mode | indicator | operating status |
|
|
|
|
|
|
|
On | Green | Not activated. | Horizontal and vertical | Picture already on. |
|
|
| synchronizing signals |
|
|
|
| are present from the |
|
|
|
| computer. |
|
|
|
|
|
|
Off | Red | Activated. | Horizontal and/or | Operate the keyboard or |
|
|
| vertical synchronizing | m o u s e . T h e p i c t u r e |
|
|
| signals are not sent | reappears. |
|
|
| from the computer. |
|
|
|
|
|
|
Setting the Input Skip
When this is ON, signals which are not present will be skipped over and only pictures whose signals are being transmitted will be displayed.
This setting is valid only for the INPUT SELECT button on the unit.
Example: Set to “ON”
On “INPUT SKIP” of “FUNCTION” menu, select “ON”.
| FUNCTION | |
POWER MGT. | : OFF | |
INPUT SKIP | : ON | |
PDP SAVER | : MANUAL | |
CLOSED CAPTION | : OFF | |
CAPTION CONT | : LOW | |
SEL. | ADJ. | EXIT RETURN |
Information
⬛INPUT SKIP settings
OFF: Regardless of the presence of the signal, scan and display all signals.
ON: If no input signal is present, skip that signal.
* “SETTING NOW” will appear during the input search.
Reducing burn-in of the screen
The brightness of the screen, the position of the picture, positive/negative mode and screen wiper are adjusted to reduce
On “PDP SAVER” of “FUNCTION” menu, select “MANUAL”, then press the MENU/ENTER button.
The “PDP SAVER” screen appears.
| PDP SAVER | |
PEAK BRIGHT | : 100% | |
ORBITER |
| : OFF |
INVERSE/WHITE | : OFF | |
SCREEN WIPER | : OFF | |
SOFT FOCUS | : OFF | |
OSM ORBITER | : ON | |
OSM CONTRAST | : LOW | |
SEL. | ADJ. | EXIT RETURN |
Information
⬛When set to AUTO
Set automatically, as described below.
PEAK BRIGHT: 100%
ORBITER: ON
INVERSE/WHITE: OFF
SCREEN WIPER: OFF
SOFT FOCUS: OFF
OSD ORBITER: ON
OSD CONTRAST: LOW
28