Marantz PD6150D manual Important Information

Page 5

Important Information

Warning

Not for use in a computer room as defined in the Standard for the Protection of Electronic Computer/ Data Processing Equipment ANSI/NFPA 75.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

•Reorient or relocate the receiving antenna.

•Increase the separation between the equipment and receiver.

•Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

•Consult the dealer or an experienced radio / TV technician for help.

NOTE:

When you connect a computer to this monitor, use an RGB cable including the ferrite core on both ends of the cable. And regarding HDMI and power cable, attach the supplied ferrite cores. If you do not do this, this monitor will not conform to mandatory FCC standards.

Attaching the ferrite cores:

Set the ferrite cores on both ends of the HDMI cable (not supplied), and both ends of the power cable (supplied).

Close the lid tightly until the clamps click.

Use the band to fasten the ferrite core (supplied) to the HDMI cable.

HDMI cable (not supplied)

 

 

 

 

 

 

 

 

band

band

Connector

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

core (small)

core

(small)

Power cable (supplied)

core (large)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

core (large)

Caution

This model is for use with the following optional accessories. Use with other optional accessories is capable of resulting in instability causing possible injury.

Manufacturer’s name: Marantz Japan, Inc.

Stand: AS4250 for PD4230V, PD4250D and PD5050D AS6150 for PD6150D

Please contact Marantz America, Inc. for approved optional accessories.

4

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Model PD6150D User Guide Important Safety Instructions Avertissment What is excluded? What is covered?Before requesting service To get warranty serviceImportant Information DOC avis de conformation Recommandations importantesAvertissement Plasma monitor cleaning procedure PrecautionsTo avoid damage and prolong operating life Recommendations to avoid or minimize phosphor burn-inMises en garde et précautions de sécurité PrécautionsMéthode de nettoyage du moniteur à plasma Contents Ventilation Requirements for enclosure mounting InstallationBattery Installation and Replacement How to use the remote controlHandling the remote control Cable ManagementReceives the signals from the remote control Turns the monitor’s power on and offPart Names and Function Front ViewRear View/ Terminal Board Remote Control Basic Operations Wide Operations When viewing videos or digital video discsWhen wide signals are input Wide Screen Operation with Computer Signals Supported resolution Normal size screen 43 or SxgaMenu Operations OSM On Screen Menu ControlsMain menu Sub menu Sub menu 3 Sub menu Menu Tree Restoring the factory default settings Only when Auto Picture is OFF RGB/PC onlyStoring picture settings Picture Settings MenuAdjusting the picture Reducing noise in the pictureAdjusting the color to the desired level Setting the color temperatureMaking the Low Tone adjustments Changing the Gamma CurveSetting the picture to suit the movie Adjusting the pedestal level black levelAdjusting the colors Image Adjust Settings Menu Audio Settings MenuSetting the allocation of the audio connectors Adjusting the Position, Size, Fine Picture, Picture ADJSET UP Settings Menu Setting the background color when no signal is being input Setting the signal and black level for Hdmi signalSetting the video signal format Setting the position of the menu Setting the screen size for S1/S2 video inputResetting to the default values Turning on/off the menu displaySetting the power management for computer images Function Settings MenuPOWER/STANDBY indicator Setting the Input SkipOrbiter settings Peak Bright settingsINVERSE/WHITE Settings Soft Focus settingsReducing the brightness of Closed Caption Signal Information MenuSetting Closed Caption Pin Assignments External ControlSymptom Checks Remedy TroubleshootingSignals Specifications PD6150DComputer input signals supported by this system Table of Signals Supported PD6150D Supported resolution Declaration of Conformity Is a registered trademark
Top Page Image Contents