PEAK BRIGHT
Use this to activate the brightness limiter.
Example: Setting “PEAK BRIGHT” to “75%”
On “PEAK BRIGHT” of “PDP SAVER” menu, select “75%”.
| PDP SAVER | |
PEAK BRIGHT | : 75% | |
ORBITER |
| : OFF |
INVERSE/WHITE | : OFF | |
SCREEN WIPER | : OFF | |
SOFT FOCUS | : OFF | |
OSM ORBITER | : ON | |
OSM CONTRAST | : LOW | |
SEL. | ADJ. | EXIT RETURN |
Information
⬛PEAK BRIGHT settings
100%: The brightness of the screen is adjusted automatically to suit the picture quality.
75%, 50%, 25%: Sets maximum brightness.
The brightness level decreases in the order of 75%, 50%, 25%. 25% provides minimum brightness.
* These values are approximate.
ORBITER
Use this to set the picture shift.
Example: Setting “ORBITER” to “AUTO1”
On “ORBITER” of “PDP SAVER” menu, select “AUTO1”.
PDP SAVER
PEAK BRIGHT : 100%
ORBITER: 
AUTO1 
INVERSE/WHITE | : OFF | |
SCREEN WIPER | : OFF | |
SOFT FOCUS | : OFF | |
OSM ORBITER | : ON | |
OSM CONTRAST | : LOW | |
SEL. | ADJ. | EXIT RETURN |
Information
⬛ORBITER settings
OFF: Orbiter mode does not function.
This is the default setting when RGB is input. AUTO1: The picture moves around the screen intermittently, making the picture smaller. This is the default setting when a Video or a DVD/HD/DTV signal is input. Set to “OFF” when these signals are not used. AUTO2: The picture moves around the screen intermittently, making the picture bigger.
*When a Video or a DVD/HD/DTV signal is input, the AUTO1 and 2 functions will affect only the moving picture and will not make the screen smaller or bigger.
INVERSE/WHITE
Use this to set the inverse mode or to display a white screen.
Example: Setting “INVERSE/WHITE” to “WHITE”
On “INVERSE/WHITE” of “PDP SAVER” menu, select “WHITE”.
| PDP SAVER | |
PEAK BRIGHT | : 100% | |
ORBITER |
| : OFF |
INVERSE/WHITE | : WHITE | |
SCREEN WIPER | : OFF | |
SOFT FOCUS | : OFF | |
OSM ORBITER | : ON | |
OSM CONTRAST | : LOW | |
SEL. | ADJ. | EXIT RETURN |
Information
⬛INVERSE/WHITE Settings
OFF: Inverse/white mode does not function.
INVERSE: The picture is displayed alternately between positive image and negative image.
WHITE: The entire screen turns white.
SCREEN WIPER
When this is set to ON, a white vertical bar moves repeatedly from the left and of the screen to the right end at a constant speed.
Example: Setting “SCREEN WIPER” to “ON”
On “SCREEN WIPER” of “PDP SAVER” menu, select “ON”.
| PDP SAVER | |
PEAK BRIGHT | : 100% | |
ORBITER |
| : OFF |
INVERSE/WHITE | : OFF | |
SCREEN WIPER | : ON | |
SOFT FOCUS | : OFF | |
OSM ORBITER | : ON | |
OSM CONTRAST | : LOW | |
SEL. | ADJ. | EXIT RETURN |
Information
⬛SCREEN WIPER
ON: The white vertical bar appears.
OFF: Screen wiper mode does not function.
SOFT FOCUS
Reduces edges and softens the image.
Example: Setting “SOFT FOCUS” to “LEVEL2”
On “SOFT FOCUS” of “PDP SAVER” menu, select “LEVEL2”.
| PDP SAVER | |
PEAK BRIGHT | : 100% | |
ORBITER |
| : OFF |
INVERSE/WHITE | : OFF | |
SCREEN WIPER | : OFF | |
SOFT FOCUS | : LEVEL2 | |
OSM ORBITER | : ON | |
OSM CONTRAST | : LOW | |
SEL. | ADJ. | EXIT RETURN |
Information
⬛SOFT FOCUS settings
OFF: Turns the SOFT FOCUS function off.
LEVEL1, 2, 3, 4: Activates the SOFT FOCUS setting. The higher numbers create a softer image.
“SHARPNESS ” can not be adjusted on the “PICTURE” menu.
29