Marantz VP-12S2 Connection with a HD-Video, Satellite, Cable Tuner or PC, Advanced Connection

Page 13

Connection with a HD-Video, Satellite, Cable Tuner or PC

You can connect this projector to HD-Video /PC using RGB IN port, or Satellite /Cable Tuner /PC using DVI-D IN port.

1.Connect one end of the RGB cable to the RGB IN port, or one end of the DVI-D cable to the DVI-D IN port on the projector.

2.Connect the other end to the corresponding port on a HD-Video, Satellite, Cable Tuner or personal computer.

Note : When projecting a video image from a device connected to the DVI-D terminal, follow the procedure below.

1.Turn on power of this unit. (☞ P.16)

2.Set the input video source to AUX (DVI-D input). (☞ P.16)

3.Turn on power of the device connected to the DVI-D terminal of the unit (i.e. DVD player). If the procedure above is not followed, projected image may corrupt.

For the details of the DVI-D terminal on the device connected with the unit, see the instruction manual of the device.

RGB (D-Sub monitor) cable
(commercially available)	RGB OUT
	RGB OUT
	or
	DVI-D out
	HD-Video / Satellite
	/ Cable Tuner
	Monitor output
	RGB OUT
	or
	DVI-D out
DVI-D cable
(commercially available)	IBM VGA or
	IBM VGA or
	Compatible PC

Advanced Connection

You can control total home theater system using PC or Marantz receiver equipment.

For installing below system, consult with Marantz authorized dealer.

RS-232C cable

(straight type, commercially available)

RS-232C

External Controller

Screen

35mm Mini Plug (Mono)

(commercially available)

(commercially available)

REMOTE CONTROL IN

REMOTE CONTROL OUT

Control Adapter cable

(supplied)

Receiver equipment

ENGLISH

9

Image 13

Contents Model VP-12S2 User Guide For the customers in the USA Important Safety Instructions Table of Contents Replacement Important SafeguardsOptics FeaturesElectronics & Software Accessories Projection Lens IR sensor Front and Top ViewTerminals Rear and Terminals ViewBottom View ¡0THEATER key P.28 Remote ControllerRemote Controller Operational Range Preparing the Remote ControllerWhen pulling out a cable When making connections be sure toConnection with AC Power Supply ConnectionAdvanced Connection Connection with a HD-Video, Satellite, Cable Tuner or PCTurning on the Power Initial SettingZooming and Focusing Adjusting the Image PositionDetail Focusing Adjusting the HeightReturning the Projector to its Initial Position Counterclockwise DownKeystone Correction Recommended Setting InstallationInstalling on a tabletop Mounting on the ceiling16 9 Screen Screen Size and Projection Distance inchScreen Diagonal Width Height Minimum Maximum Inch Screen Size and Projection Distance mSelecting the Aspect Mode Selecting the Input Signal SourceBasic Operations Screen Images in a 169 screen Screen Images in a 43 screen To Turn off the Power Menu Structure OperationsPicture Adjust Using On-Screen MenuSetting the Picture Adjust Menu Color Temp. TemperatureFine Menu DelayLuminance ChrominanceMiscellaneous Sub ControlSetting the Setting Menu SettingDisplay Setting the Display MenuConfiguration Setting the Trigger 2 Menu Setting the Config MenuTrigger On Output DCMemory Setting the Memory MenuLamp Life and Replace Lamp Lamp LifeInitialize the Lamp Life How to replace the Lamp Unit MaintenanceReplacing Lamp Unit Replacement Parts Cleaning the LensOptional Accessories Error Mode TroubleshootingOn Screen Message SpecificationsGlossary Timing chartTop DimensionsFront BottomIs a registered trademark