Marantz VP-12S2 manual Configuration

ENGLISH

Configuration

The following adjustments can be made:

Picture Adjust	Lamp Mode	High
Setting	High Bright	Off
Display	OSD Position	16:9
Config	Language	English
Trigger 2	Ceiling	Off
Memory	Rear	Off
	Reset Lamp Life
	Reset All

–OSD Position (16:9 / 4:3)

Select OSD position from 16:9 or 4:3.

Lamp mode	High, Low
High Bright	On, Off
	High Bright On : Display brightest image.
OSD Position	16:9, 4:3
Language	English, German, French, Spanish,
	Portuguese, Italian
Ceiling	On, Off
	On: The picture is reversed horizontally
	and vertically.
Rear	On, Off
	On: The picture is reversed horizontally.
Reset Lamp Life	Yes, No
Reset All	Yes, No

Picture Adjust	Contrast	50
Setting	Brightness	44
Display	Color	64
Config	Sharpness	6
Trigger 2	Tint	0
Memory	Noise Reduction	0
	Color Temp.	Middle
	Fine Menu

Picture Adjust	Contrast	50
Setting	Brightness	44
Display	Color	64
Config	Sharpness	6
Trigger 2	Tint	0
Memory	Noise Reduction	0
	Color Temp.	Middle
	Fine Menu

16 : 9 OSD position 4 : 3 OSD position

– Reset Lamp Life

Lamp Life must be reset immediately if the lamp is replaced. Select “Reset Lamp Life” from Config menu. The menu shown
ResetYes	LampLifeNo?
below is displayed.

Again, select “Yes”, and press the ENTER key. Then the lamp life is initialized.

– Reset All

All settings are resResett to the factory default settings except the lamp life.

When the userYeselects “Yes”, theNof llowing message appears:

All?

Again, select “Yes”, and press the ENTER key.

26