Marantz VP-12S2 manual Setting the Display Menu

	Display
	Setting	KeystoneH		0
	PictureAdjust		V
The following adjustments can be made:
	Display	AutoAdjust
	Config	V
	Trigger2			1250
	Memory	PhaseSizectureShiftVH

Item	Adjustments
Keystone-V (Electronic vertical
keystone correction)
Keystone-H (Electronic horizontal
keystone correction)
Auto Adjust		Yes / No
Picture Shift V	Down	Up
Size V	Small	Large
Picture Shift H	Left	Right
Size H	Small	Large
Phase	Backward	Forward

ENGLISH

–Keystone H, V

Adjust trapezoid image to rectangle image.

–Auto Adjust

Yes : For RGB IN signal, Picture Shift V and H, Size V and H, and Phase are adjusted automatically.

No : If something wrong with AUTO Adjust, select No, and adjust Size V, Size H, Picture Shift H, Picture Shift V, and/or Phase

manually.

Use 1 / 2 key to select “Yes”, and press the ENTER key.

–Picture Shift V, H

Adjust the position of the picture. H adjusts the horizontal position of the picture. V adjusts the vertical position of the picture.

–Size V, H

Adjust the vertical and horizontal size of the picture.

–Phase

Adjust the phase of the DMDTM dots and the computer signal input from the RGB IN. Adjust the picture to where it looks clearest.

NOTE:

-If User Memory is set to default, Picture Shift V, H cannot be selected. To select Picture Shift V, H, set User Memory to either 1 to 3. See “Memory”. (☞ P.28)

❖Setting the Display Menu

1.Use 1 / 2 key to adjust.

2.Use 3 key to go back to the menu item.

2.

2.

1. 1.

25