ENGLISH
2Adjust the image size (zoom)
Getting Started
LENS
Lens Control
Zoom
Select Back
Operate 
BACK
Adjust accordingly by pressing the up/down buttons
Preparation
● Every time the LENS
button is pressed, the adjustment item will be switched among “Focus”, “Zoom” and “Shift”.
LENS
Focus 
Zoom 
Shift
3To end
BACK
6Turn off the power
While a confirmation screen is displayed
Blinking (Red Lamp)
Cool Down mode
Light on (Red Lamp)
●When power off, the lens cover will be closed.
●The power cannot be turned off within approximately 90 seconds after it has been turned on. Start operation only after 90 seconds time.
●You can also press the 
button on the unit to turn off the power. (
P15)
●Pull out the power plug when the unit will not be used for a prolonged time.
TIPS
You can hide the image temporarily
You can hide the image temporarily.
HIDE
● Press the HIDE
image.
●The power cannot be turned off when the image is temporarily hidden.
MEMO
About Cool Down mode
●The Cool Down mode is a function to cool down the lamp for approximately 60 seconds after projection is complete. This function prevents the internal parts of the unit from deformation or damage due to overheating of the lamp. It also prevents lamp blowout and premature shortening of lamp life.
●During Cool Down mode, the [STANDBY/
ON] indicator blinks in red.
●After the Cool Down mode is complete, the unit automatically returns to standby mode.
●Do not pull out the power plug during
Cool Down mode. This may shorten the lamp life and cause a malfunction.
Basic Operation
Settings
Troubleshooting
Others
27