JVC DLA-RS0, PB006585599-1, 1108TTH-AO-AO manual Dark -15 to 0 Bright, Select color adjustment

4 Settings

Setting Menu (Continued)

Picture Adjust

08Advanced

Adjusts the contours of the image, detailed composition of the image and image color. (Cannot set when the “Picture Mode” in “THX”.)

Sharpness	Sharpness		(Soft) 0 to	100 (Sharp)		Adjusts the outline of image.
	Detail		(Soft) –50 to 50 (Strong)			Emphasizes the details of image.
	Enhancement
	RNR		(Soft) 0 to	16 (Strong)		Adjusts the intensity of removing
						image noise.
NR*	MNR		(Soft) 0 to	16 (Strong)		Adjusts the intensity of removing
						mosquito noise.
	BNR		On			Reduces block noise.
			Off			Input signal remains unchanged.
		Off			Input signal remains unchanged.
CTI*		Low
		Middle				Reduces color smear.
		High

*In case of HD signals or PC signals, NR and CTI cannot be set.

● Abbreviations
NR: Noise Reduction	RNR: Random Noise Reduction		MNR: Mosquito Noise Reduction
BNR: Block Noise Reduction		CTI: Color Transient Improvement

Color Management

Off	The image color cannot be adjusted.
	Pause	Off	Video mode
Custom 1		On	Still mode
	Color	Values of each color can be adjusted (“Red,
Custom 2
Custom 3	Management	Yellow, Green, Cyan, Blue and Magenta”).
	Adjustment*
	All Reset	Return to the factory settings.

09Lens Aperture

(Dark) -15 to 0 (Bright)

10Reset

Reset the setting.

* About “Color Management Adjustment”

1Set the picture mode of the color management.

2Select the color to be adjusted by color management.

Picture Adjust

> Color Management
Off	Pause	Off
Custom1	Red
Custom2	Yellow
Custom3	Green
	Cyan
	Blue
	Magenta
	All Reset
	Hue	0
	Saturation	0
	Brightness	0
Exit	Operate	Back	Check	Before
MENU Select		BACK	TEST

3Select color adjustment.

Picture Adjust

> Color Management
Off	Pause	Off
Custom1	Red
Custom2	Yellow
Custom3	Green
	Cyan
	Blue
	Magenta
	All Reset
	Hue	0
	Saturation	0
	Brightness	0
Exit	Operate	Back	Check	Before
MENU Select		BACK	TEST

34