ENGLISH
Picture Adjust > Gamma
07 Gamma
Sets the gradation characteristics of the projected image.
| Normal | For normal circumstances, select this |
| |
| setting. |
|
| |
|
|
|
| |
| A | Set gamma to “A”. | Gamma adjustment cannot be performed, | |
|
|
|
| and only copy is valid. |
| B | Set gamma to “B”. | ||
|
| |||
| C | Set gamma to “C”. |
| |
|
| Three different kinds of gamma can be set according to your preferences. | ||
|
| Correction | The coefficient (1.8 to 2.6) of the gamma curve can be selected. | |
|
| Value |
|
|
| Custom 1 | Gamma | The gamma curve for the colors (Red, Green, Blue) can be adjusted | |
| separately. |
| ||
| Custom 2 |
| ||
| Adjustment* | Adjusting “White” will adjust for all “Red, Green, Blue” values. The | ||
| Custom 3 |
| gamma curve displays the value for “Green”. | |
| (Gamma Setup) |
|
|
|
| Copy | Copy the adjusted gamma data. | ||
|
| |||
|
| Paste | Paste the copied gamma data. | |
|
| Reset | Return the gamma coefficients to the values 2.2 set by “Correction | |
|
| Value”. |
| |
|
|
|
| |
●“Normal” is suitable for normal circumstances but other settings can be selected according to your preferences.
●This setting can also be configured from the remote control. (
P16)
●Cannot set when the “Picture Mode” in “THX”.
*“Gamma Adjustment”
①Select the reference gamma curve coefficient (1.8 ～ 2.6) in “Correction Value”.
② Select the color to be adjusted in the gamma adjustment screen.
Picture Adjust |
|
|
|
|
>Gamma |
|
|
|
|
Normal | Correction Value | 2.2 |
| |
A | White | 1023 |
|
|
B | Red |
|
|
|
C | Geen |
|
|
|
Costom1 | Blue | 512 |
|
|
Costom2 | Copy |
|
|
|
Costom3 | Paste |
|
|
|
| Reset | 0 | 50 | 100(%) |
|
| |||
Exit | Operate Back | Check | Before | |
MENU Select |
| BACK | TEST |
|
③Adjust the gamma curve in the gamma curve adjustment screen.
Picture Adjust | Picture Adjust |
>Gamma | >Gamma |
Normal | Correction Value | 2.2 |
| Normal | Correction Value | 2.2 |
| ||||||
A | White | 1023 |
|
| A |
|
| White | 1023 |
|
|
| |
B | Red |
|
|
|
| B |
|
| Red |
|
|
|
|
C | Geen |
|
|
|
| C |
|
| Geen |
|
|
|
|
Costom1 | Blue | 512 |
|
| Costom1 |
| Blue | 512 |
|
|
| ||
Costom2 | Copy |
|
|
|
| Costom2 |
| Copy |
|
|
|
| |
Costom3 | Paste |
|
|
|
| Costom3 |
| Paste |
|
|
|
| |
| Reset |
| 0 | 50 | 100(%) |
|
|
| Reset |
|
|
|
|
|
|
|
|
|
|
| 0 | 50 | 100(%) | ||||
|
|
|
|
|
|
|
| ||||||
| Input: | 10% |
|
|
|
|
|
|
|
| |||
|
|
|
|
|
|
| Input: | 50% |
|
|
| ||
| Output:100 |
|
|
|
|
|
|
|
|
| |||
|
|
|
|
|
|
| Output: 580 |
|
|
| |||
Exit | Back | Back | Check |
|
|
|
|
|
|
| |||
Before | Exit |
|
| Back | Back | Check | After | ||||||
MENU Select | Operate | BACK | TEST |
|
| ||||||||
| MENU | Select | Operate | BACK | TEST | ||||||||
|
|
|
|
|
|
|
|
|
| ||||
Select the point where the gradation (brightness) | Adjust the gradation (brightness) with | ||
is to be adjusted with the / buttons. | the | / | buttons. |
●You can switch between “Before” and “After” using the [TEST] button of the remote control.
④To end
BACK | BACK | Save gamma data? | OK | |
|
|
| ||
|
| Yes | No |
|
●If gamma curve is adjusted repeatedly, calculation errors will be accumulated and the gamma curve may not be able to revert back to its original form. In that case, select “Reset”.
Getting Started
Preparation
Basic Operation
Settings
Troubleshooting
Others
33