JVC DT-V24L3D, DT-V20L3D specifications Settings of E.AUDIO Group, Adjustment bar

Page 12

Menu Configuration—MAIN MENU (cont.)

Adjustment bar

Displayed when selecting

Operation guide“BALANCE.” Shows the buttons for each

operation.

•The menu automatically disappears in about 30 seconds after the previous operation.

•Some items may not appear on the menu depending on the input or the input signal.

•The items controlled by the MAKE system do not appear on the menu.

NOTE

Settings of “E.AUDIO GROUP”

The setting values and selectable audio channels of EMBEDDED AUDIO signals are as follows.

1G: channel(s) 1/2/3/4/1+2/3+4/1 – 4 (1G)

2G: channel(s) 5/6/7/8/5+6/7+8/5 – 8 (2G)

1-2G:channel(s) 1/2/3/4/5/6/7/8/1+2/3+4/5+6/7+8/1 – 4 (1G)/5 – 8 (2G)/1 – 8 (1G+2G)

3G: channel(s) 9/10/11/12/9+10/11+12/9 – 12 (3G)

1-3G:channel(s) 1/2/3/4/5/6/7/8/9/10/11/12/1+2/3+4/5+6/7+8/9+10/11+12/1 – 4 (1G)/5 – 8 (2G)/ 9 – 12 (3G)/1 – 8 (1G+2G)/1 – 12 (1-3G)

Example of the level meter display—Level meter position and audio channels

Ex.: When “LEVEL METER ch” is set to “LINE” and “BAR TYPE” is set to “3COLORS”

OVER LEVEL

REFERENCE LEVEL

Red

Yellow

Green

•When “BAR TYPE” is set to “W.100,” the standard input level set in “REFERENCE LEVEL” is displayed with the line indication. The input level set in “OVER LEVEL” is not displayed.

•The level meter with no audio signal input is displayed in white for “3COLORS,” and in gray for “W.100.”

•You can select the position of the level meter display—top or bottom of the screen (☞ “POSITION” in “INFORMATION” on page 15).

 

 

 

12

AUDIO SETTING

 

 

Settings for the audio output balance, EMBEDDED AUDIO signals and level meter

Item

To do

Setting value

BALANCE

Adjust the balance between the right and left

L5 – L1, 0, R1 – R5

 

 

 

speakers.

 

AUDIO1 ASSIGN.

Select the video input which the audio signal

SDI-1, SDI-2, DVI, COMP/RGB, VIDEO-1,

 

 

 

through AUDIO ASSIGN (IN 1) terminal is

VIDEO-2

 

 

 

assigned to.

 

AUDIO2 ASSIGN.

Select the video input which the audio signal

 

 

 

 

through AUDIO ASSIGN (IN 2) terminal is

 

 

 

 

assigned to.

 

E.AUDIO GROUP*1

Select the audio channel group of the

☞ “NOTE”

 

 

 

EMBEDDED AUDIO signals.

 

LEVEL METER

Adjust the level meter display for the

☞ “NOTE”

SETTING*1

EMBEDDED AUDIO signals.

 

 

LEVEL METER ch

Select how the audio channels are displayed on

OFF, LINE (Displays the channels 1 – 6

 

 

 

the level meter.

at the left of the screen and 7 – 12 at the

 

 

 

 

right.), DIVIDE (Displays the odd channels at

 

 

 

 

the left of the screen and the even channels

 

 

 

 

at the right.)

 

BAR TYPE

Select the color of the level meter display.

3COLORS (3 colors to indicate variations in

 

 

 

 

input levels), W.100 (white)

 

REFERENCE

Select the standard input level indicated on the

–20dB, –18dB

 

LEVEL

level meter.

 

 

OVER LEVEL

Select the input level’s lower limit indicated in

–10dB, –8dB, –6dB, –4dB, –2dB

 

 

 

red for the “3COLORS” display.

 

 

BAR BRIGHTNESS

Select the brightness of the level meter.

LOW, HIGH

*1 Memorized for each input.

Page 11 Page 13
Image 12
Page 11 Page 13
Contents DT-V24L3D Safety Precautions How to replace the fuseThis product for protection against electric shock These openings must not be blocked or coveredDear Customer Information for Users on Disposal of Old EquipmentEMC Supplement Installation To install the standTo detach the stand To adjust the stand height Fix the monitor to a wall by using stringsTo prevent an accidental fall Higher position Lower positionDaily Operations / Connections Front panelPress or button when a menu is not displayed Display the menuPress buttons to select an item, then press button Press Menu buttonAttaching the power cord holder Rear panelAvailable signals Video signalsComputer signals preset DVI-D Hdcp terminals Specification of the DVI-D Hdcp terminalMenu Configuration-MAIN Menu Setting value -20 +20Picture Function Operation guideSetting of Area MARKER, Safety MARKER, R-AREA Marker Settings for marker functions 1/2MARKER*1*2 Settings of E.AUDIO Group Adjustment barWave Form SETTING*1 Example of the wave form monitorSync Function Settings of sub menu Posi Settings of SD43 LargeSetting of Character SET Settings for the information display of the monitorControl Lock Setting value OFF, on InformationExternal Control About the external controlControl priority is as follows MAKE/TRIGGER systemUsing the MAKE/TRIGGER system To assign the functions to the pin terminalsOperation of the external control Functions controlled by the MAKE/TRIGGER systemUsing the serial communication Communication specificationsCommand outline Basic command listTroubleshooting Maintenance20 Self-check programSpecifications GeneralInput/output terminals Dimensions Unit mm inch Front viewSide view Page DT-V24L3D/DT-V20L3D Multi Format LCD Monitor

DT-V20L3D, DT-V24L3D specifications

The JVC DT-V24L3D and DT-V20L3D are professional broadcast monitors designed to cater to the demanding needs of video production environments. These monitors are particularly engineered to provide high-quality imaging that meets the rigorous standards of broadcast and production professionals.

One of the standout features of these monitors is their LCD technology, which offers remarkable brightness and color accuracy. The DT-V24L3D features a 24-inch display, while the DT-V20L3D has a slightly smaller 20-inch screen. Both monitors utilize a panel with a resolution of 1920 x 1200 pixels, ensuring that footage is presented in sharp detail. This high resolution is particularly beneficial for critical monitoring tasks, as it provides a clear representation of image quality.

Color reproduction is another highlight of these models. They support a wide color gamut, allowing users to view footage with accurate color representation that adheres to industry standards. Their ability to cover various color spaces, including Rec. 709 and others, ensures that color grading can be performed with confidence. The monitors also feature built-in 10-bit processing, which enhances color depth and transitions, making them suitable for HDR workflows.

In terms of connectivity, the DT-V24L3D and DT-V20L3D are equipped with a versatile array of inputs. They feature HDMI, SDI, and composite inputs, among others. This extensive compatibility allows them to be integrated into various studio setups and facilitates seamless connection with different types of equipment, making them ideal for multi-camera operations.

Both monitors are also designed with user-friendly controls, allowing operators to easily adjust settings for brightness, contrast, and color calibration. They come with various preset modes tailored for specific viewing conditions, which aids in achieving optimal visual performance.

Additionally, these models support advanced features such as waveform monitoring, vector scope, and a range of display assist tools that are vital for broadcast and production environments. This enables professionals to make informed decisions while monitoring live feeds or recordings.

Overall, the JVC DT-V24L3D and DT-V20L3D monitors deliver exceptional performance, advanced technology, and reliability that professionals demand in video production. Their combination of high-resolution screens, extensive connectivity, and comprehensive monitoring features make them invaluable tools for any broadcast and production workflow.
Top Page Image Contents