JVC DT-V20L3D Setting of Character SET, Information, Control Lock Setting value OFF, on

Page 15

Operation guide

Shows the buttons for each operation.

The menu automatically disappears in about 30 seconds after the previous operation.

Some items may not appear on the menu depending on the input or the input signal.

The items controlled by the MAKE system do not appear on the menu.

NOTE

Setting of “CHARACTER SET.”

Assign a name for each video source.

1Change the input to one that you want to assign a video source name for.

2 Select “CHARACTER SET.”

3Press buttons to select the first character.

Each time you press button, the character changes as follows. Press button to reverse the order.

Space

4Press button to move the arrow to the next space.

• The characters entered before moving the arrow are memorized.

5Repeat steps 3 and 4 (10 characters at maximum).

6Press MENU button to store the name.

REMOTE SETTING (“External Control” on pages 16 to 18)

Settings for the external control

Item

To do

Setting value

SERIAL TYPE

Select the input terminal used for external control by

RS232C, RS485

 

serial communication.

 

PARALLEL TYPE

Select the external control method for the MAKE/

MAKE, TRIGGER, SET

 

TRIGGER terminal.

 

PIN1, PIN2, PIN3,

Assign the control functions to the pins of the MAKE/

“Functions controlled by the MAKE/

PIN4, PIN5

TRIGGER terminal.

TRIGGER system” on page 17

 

• Assign a function to each pin terminal by selecting

 

 

“SET” in “PARALLEL TYPE.” (The functions are

 

 

assigned for “PIN6” – “PIN8” and you cannot

 

 

change the assignment of these functions.)

 

INFORMATION

Settings for the information display of the monitor

Item

To do

Setting value

POSITION

Select the position to show the information display (“On the

UPPER, LOWER

 

Information Display” on page 7).

 

SOURCE ID

Select if the name assigned in “CHARACTER SET.” is displayed on

OFF, ON

 

the screen (“On the Information Display” on page 7).

 

CHARACTER SET.*1

Assign a name to each video source as you like (10 characters at

“NOTE”

 

maximum). You can also enter a name using the RS-232C system.

 

STATUS DISPLAY

Select if the status of the current input and the setting of muting are

AUTO, OFF, ON

 

displayed on the screen (“On the Status Display” on page 7).

 

CRC ERROR

Select if the CRC error indication for the input HD SDI signal is displayed

ON, OFF

 

on the screen (“On the Information Display” on page 7).

 

SUB HOUR METER

Display the hours of use (unit: hour). You can reset this item.

 

MODEL

Display the model name of the monitor.

 

VERSION

Display the version of the monitor.

 

HOUR METER

Display the total hours of use (unit: hour). This item is used for maintenance of the monitor. You

 

cannot reset this item.

 

*1 Memorized for each input.

CONTROL LOCK Setting value: OFF, ON

Turns on (or off) the control lock function to disable the buttons on the front panel.

The following operations are available even when this function is activated.

Turning on/off (on standby) the monitor

Displaying the SET-UP MENU (by pressing button while holding button) and turning “CONTROL LOCK” to “OFF”

Operating the monitor by an external control

If you try other operations, “ Control lock on!” appears on the screen.

all reset

Restores all the settings and adjustments of the monitor to the default.

“HOUR METER” and the settings done by using the adjustment knobs on the front panel will not be reset.

After performing “all reset,” the monitor is turned off then turned on automatically.

15

Image 15
Contents DT-V24L3D These openings must not be blocked or covered Safety PrecautionsHow to replace the fuse This product for protection against electric shockDear Customer Information for Users on Disposal of Old EquipmentEMC Supplement Installation To install the standTo detach the stand Higher position Lower position To adjust the stand heightFix the monitor to a wall by using strings To prevent an accidental fallFront panel Daily Operations / ConnectionsPress Menu button Press or button when a menu is not displayedDisplay the menu Press buttons to select an item, then press buttonRear panel Attaching the power cord holderSpecification of the DVI-D Hdcp terminal Available signalsVideo signals Computer signals preset DVI-D Hdcp terminalsOperation guide Menu Configuration-MAIN MenuSetting value -20 +20 Picture FunctionSetting of Area MARKER, Safety MARKER, R-AREA Marker Settings for marker functions 1/2MARKER*1*2 Adjustment bar Settings of E.AUDIO GroupWave Form SETTING*1 Example of the wave form monitorSync Function Settings of SD43 Large Settings of sub menu PosiInformation Setting of Character SETSettings for the information display of the monitor Control Lock Setting value OFF, onMAKE/TRIGGER system External ControlAbout the external control Control priority is as followsFunctions controlled by the MAKE/TRIGGER system Using the MAKE/TRIGGER systemTo assign the functions to the pin terminals Operation of the external controlBasic command list Using the serial communicationCommunication specifications Command outlineTroubleshooting Self-check program Maintenance20Specifications GeneralInput/output terminals Dimensions Unit mm inch Front viewSide view Page DT-V24L3D/DT-V20L3D Multi Format LCD Monitor

DT-V20L3D, DT-V24L3D specifications

The JVC DT-V24L3D and DT-V20L3D are professional broadcast monitors designed to cater to the demanding needs of video production environments. These monitors are particularly engineered to provide high-quality imaging that meets the rigorous standards of broadcast and production professionals.

One of the standout features of these monitors is their LCD technology, which offers remarkable brightness and color accuracy. The DT-V24L3D features a 24-inch display, while the DT-V20L3D has a slightly smaller 20-inch screen. Both monitors utilize a panel with a resolution of 1920 x 1200 pixels, ensuring that footage is presented in sharp detail. This high resolution is particularly beneficial for critical monitoring tasks, as it provides a clear representation of image quality.

Color reproduction is another highlight of these models. They support a wide color gamut, allowing users to view footage with accurate color representation that adheres to industry standards. Their ability to cover various color spaces, including Rec. 709 and others, ensures that color grading can be performed with confidence. The monitors also feature built-in 10-bit processing, which enhances color depth and transitions, making them suitable for HDR workflows.

In terms of connectivity, the DT-V24L3D and DT-V20L3D are equipped with a versatile array of inputs. They feature HDMI, SDI, and composite inputs, among others. This extensive compatibility allows them to be integrated into various studio setups and facilitates seamless connection with different types of equipment, making them ideal for multi-camera operations.

Both monitors are also designed with user-friendly controls, allowing operators to easily adjust settings for brightness, contrast, and color calibration. They come with various preset modes tailored for specific viewing conditions, which aids in achieving optimal visual performance.

Additionally, these models support advanced features such as waveform monitoring, vector scope, and a range of display assist tools that are vital for broadcast and production environments. This enables professionals to make informed decisions while monitoring live feeds or recordings.

Overall, the JVC DT-V24L3D and DT-V20L3D monitors deliver exceptional performance, advanced technology, and reliability that professionals demand in video production. Their combination of high-resolution screens, extensive connectivity, and comprehensive monitoring features make them invaluable tools for any broadcast and production workflow.