JVC DT-V24L3D, DT-V20L3D specifications Settings of sub menu Posi, Settings of SD43 Large

Page 14

Menu Configuration—SET-UP MENU

For the operation procedure, see page 7.

Operation guide

Shows the buttons for each operation.

• The menu automatically disappears in about 30 seconds after the previous operation.

• Some items may not appear on the menu depending on the input or the input signal.

• The items controlled by the MAKE system do not appear on the menu.

NOTE

Settings of “sub menu POSI.”

The setting values and features are as follows.

LOWER1: Displays the current setting and adjustment bar at the lower part of the screen.

UPPER1: Displays the current setting and adjustment bar at the upper part of the screen.

LOWER2: Displays the current setting at the lower part of the screen.

UPPER2: Displays the current setting at the upper part of the screen.

• The adjustment bar is not displayed for some items.

Settings of “SD4:3 LARGE”

The setting values and features are as follows.

OFF: Fit the vertical picture size into the pixel numbers of the monitor display.

ON: Fit the vertical picture size into that of the monitor display.

14

FUNCTION SETTING

Setting for the sub menu display, color system, color of the tally lamp and the picture size.

Item

To do

Setting value

sub menu POSI.

Select the contents and displaying position of “sub menu.”

☞ “NOTE”

COLOR

Select the color system.

AUTO, NTSC, PAL

SYSTEM

• If the picture is unstable with “AUTO,” select “PAL” or “NTSC.”

 

TALLY SELECT

Select the color of the tally lamp.

GREEN, RED

SD4:3 LARGE

Change the picture size of 4:3 format signal.

☞ “NOTE”

PICTURE SUB ADJ.

Adjusts the standard level for the picture adjustment and selects the set-up level for the input video signal.

Item

To do

Setting value

CONTRAST*1

Adjust the standard level for the contrast adjusted

–20 – +20

 

with CONTRAST knob on the front panel.

 

BRIGHT*1

Adjust the standard level for the brightness

–20 – +20

 

adjusted with BRIGHT knob on the front panel.

 

CHROMA*1

Adjust the standard level for the chroma adjusted

–20 – +20

 

with CHROMA knob on the front panel.

 

PHASE*1

Adjust the standard level for the phase adjusted

–20 – +20

 

with PHASE knob on the front panel.

 

NTSC SETUP

Select the set-up level of the input NTSC signal.

00 (compliant with 0% set-up signal), 7.5 (compliant

 

 

with 7.5% set-up signal)

COMPO.

Select the level of the analog component signal

B75 (compliant with BetacamVTR 7.5% set-up

LEVEL

(480i and 576i only).

signal), B00 (compliant with BetacamVTR 0% set-

 

 

up signal), SMPTE (compliant with M2VTR signals)

sub menu

Display the sub menu which enables you to adjust

the items in “PICTURE SUB ADJ.” while viewing the

 

actual picture.

 

reset

Restore the default settings for all the items in “PICTURE SUB ADJ.”

*1 Memorized for each input.

SIZE/POSI. ADJ.

Adjusts the size and position of the picture.

Item

To do

Setting value

H SIZE*2

Adjust the horizontal picture size.

 

H POSITION*2

Adjust the horizontal picture position.

Setting value varies depending on

V SIZE*2

Adjust the vertical picture size.

the signals.

V POSITION*2

Adjust the vertical picture position.

 

sub menu

Display the sub menu which enables you to adjust the items of

“SIZE/POSI. ADJ.” while viewing the

 

actual picture.

 

reset

Restore the default settings for all the items in “SIZE/POSI. ADJ.”

*2 Memorized for each signal format.

WHITE BALANCE SET.

Selects the color temperature and adjusts the drive level and cutoff point of each color (R/G/B).

Item

To do

Setting value

COLOR TEMP.

Select the color temperature.

9300K, 6500K, USER

R DRIVE, G DRIVE,

Adjust the drive level of each color (red, green, and blue).

MIN – 000 – MAX (in 256 grades)

B DRIVE*3

 

 

R CUT OFF, G CUT

Adjust the cutoff point of each color (red, green, and blue).

MIN – 000 – MAX (in 256 grades)

OFF, B CUT OFF*3

 

 

sub menu

Display the sub menu which enables you to adjust the items in “WHITE BALANCE SET.” while

 

viewing the actual picture.

 

reset

Restore the default settings for the drive levels and cutoff points of the selected color

 

temperature.

 

*3 Memorized for each color temperature.

Page 13 Page 15
Image 14
Page 13 Page 15
Contents DT-V24L3D This product for protection against electric shock Safety PrecautionsHow to replace the fuse These openings must not be blocked or coveredEMC Supplement Dear CustomerInformation for Users on Disposal of Old Equipment To detach the stand InstallationTo install the stand To prevent an accidental fall To adjust the stand heightFix the monitor to a wall by using strings Higher position Lower positionDaily Operations / Connections Front panelPress buttons to select an item, then press button Press or button when a menu is not displayedDisplay the menu Press Menu buttonAttaching the power cord holder Rear panelComputer signals preset DVI-D Hdcp terminals Available signalsVideo signals Specification of the DVI-D Hdcp terminalPicture Function Menu Configuration-MAIN MenuSetting value -20 +20 Operation guideMARKER*1*2 Setting of Area MARKER, Safety MARKER, R-AREA MarkerSettings for marker functions 1/2 Settings of E.AUDIO Group Adjustment barSync Function Wave Form SETTING*1Example of the wave form monitor Settings of sub menu Posi Settings of SD43 LargeControl Lock Setting value OFF, on Setting of Character SETSettings for the information display of the monitor InformationControl priority is as follows External ControlAbout the external control MAKE/TRIGGER systemOperation of the external control Using the MAKE/TRIGGER systemTo assign the functions to the pin terminals Functions controlled by the MAKE/TRIGGER systemCommand outline Using the serial communicationCommunication specifications Basic command listTroubleshooting Maintenance20 Self-check programInput/output terminals SpecificationsGeneral Side view Dimensions Unit mm inchFront view Page DT-V24L3D/DT-V20L3D Multi Format LCD Monitor

DT-V20L3D, DT-V24L3D specifications

The JVC DT-V24L3D and DT-V20L3D are professional broadcast monitors designed to cater to the demanding needs of video production environments. These monitors are particularly engineered to provide high-quality imaging that meets the rigorous standards of broadcast and production professionals.

One of the standout features of these monitors is their LCD technology, which offers remarkable brightness and color accuracy. The DT-V24L3D features a 24-inch display, while the DT-V20L3D has a slightly smaller 20-inch screen. Both monitors utilize a panel with a resolution of 1920 x 1200 pixels, ensuring that footage is presented in sharp detail. This high resolution is particularly beneficial for critical monitoring tasks, as it provides a clear representation of image quality.

Color reproduction is another highlight of these models. They support a wide color gamut, allowing users to view footage with accurate color representation that adheres to industry standards. Their ability to cover various color spaces, including Rec. 709 and others, ensures that color grading can be performed with confidence. The monitors also feature built-in 10-bit processing, which enhances color depth and transitions, making them suitable for HDR workflows.

In terms of connectivity, the DT-V24L3D and DT-V20L3D are equipped with a versatile array of inputs. They feature HDMI, SDI, and composite inputs, among others. This extensive compatibility allows them to be integrated into various studio setups and facilitates seamless connection with different types of equipment, making them ideal for multi-camera operations.

Both monitors are also designed with user-friendly controls, allowing operators to easily adjust settings for brightness, contrast, and color calibration. They come with various preset modes tailored for specific viewing conditions, which aids in achieving optimal visual performance.

Additionally, these models support advanced features such as waveform monitoring, vector scope, and a range of display assist tools that are vital for broadcast and production environments. This enables professionals to make informed decisions while monitoring live feeds or recordings.

Overall, the JVC DT-V24L3D and DT-V20L3D monitors deliver exceptional performance, advanced technology, and reliability that professionals demand in video production. Their combination of high-resolution screens, extensive connectivity, and comprehensive monitoring features make them invaluable tools for any broadcast and production workflow.
Top Page Image Contents