JVC DT-V24L3D, DT-V20L3D specifications Installation, To detach the stand, To install the stand

Page 4

Installation

CAUTION

•Do not rest your arm on the monitor or lean against the monitor.

•Do not touch the LCD panel when installing the monitor.

•Be sure to install the monitor securely to prevent the monitor from falling over, which may cause damage to the monitor or injury.

You can place the monitor in the following two ways when using it on the supplied stand.

4

To detach the stand

CAUTION

Lay the monitor on a cloth with the LCD panel facing down to prevent the LCD panel from being damaged.

Attachment screws

You can tilt the monitor from about 6° upward to about 6° downward.

•When the monitor is not tilted (0°), the guidelines align as illustrated below.

Monitor

Stand

About 6°

0°

About 6°

When the stand plate is attached to the higher position of the stand body (☞ “To adjust the stand height” on page 5), you can place the monitor as illustrated below.

1Remove the screws on the left and right sides of the stand (see the illustration below), then lift the stand up by about 148°.

Screw (silver)

About 148°

2Attach the removed screws and place the monitor as illustrated below.

Screw holes for stand

Stand body

attachment

 

Monitor

The illustration of the monitor is of DT-V24L3D.

To install the stand

When attaching the stand to the monitor, insert the guides of the stand into the guide holes on the monitor to place the stand in the correct position. Then fix the stand firmly with the attachment screws.

Guidelines

The illustration of the monitor is of DT-V24L3D.

•You can select the stand height—higher position or lower position (☞ “To adjust the stand height” on page 5).

CAUTION

•Be careful not to pinch your fingers in the gap between the monitor and the stand.

•When the stand plate is attached to the lower position of the stand body, you cannot tilt the monitor downward.

The illustrations of the monitor are of DT-V24L3D.

•To place the monitor as illustrated on the left again, remove the screws on the left and right sides of the stand, return the monitor angle to 0°, then reattach the removed screws.

CAUTION

•When lifting up the stand...

–lay the monitor on a cloth with the LCD panel facing down to prevent the LCD panel from being damaged.

–be careful not to pinch your fingers in the moving parts.

•Make sure of lifting the stand up until it stops (about 148°); otherwise the monitor may fall over.

•Place the monitor on a mat to avoid scratching the table surface.

•Do not lift up the stand when the stand plate is attached to the lower position of the stand body.

Guides

Stand plate

Screw holes for stand attachment

Stand body

Guide holes

Monitor

The illustration of the monitor is of DT-V24L3D.

Page 3 Page 5
Image 4
Page 3 Page 5
Contents DT-V24L3D Safety Precautions How to replace the fuseThis product for protection against electric shock These openings must not be blocked or coveredInformation for Users on Disposal of Old Equipment Dear CustomerEMC Supplement To install the stand InstallationTo detach the stand To adjust the stand height Fix the monitor to a wall by using stringsTo prevent an accidental fall Higher position Lower positionDaily Operations / Connections Front panelPress or button when a menu is not displayed Display the menuPress buttons to select an item, then press button Press Menu buttonAttaching the power cord holder Rear panelAvailable signals Video signalsComputer signals preset DVI-D Hdcp terminals Specification of the DVI-D Hdcp terminalMenu Configuration-MAIN Menu Setting value -20 +20Picture Function Operation guideSettings for marker functions 1/2 Setting of Area MARKER, Safety MARKER, R-AREA MarkerMARKER*1*2 Settings of E.AUDIO Group Adjustment barExample of the wave form monitor Wave Form SETTING*1Sync Function Settings of sub menu Posi Settings of SD43 LargeSetting of Character SET Settings for the information display of the monitorControl Lock Setting value OFF, on InformationExternal Control About the external controlControl priority is as follows MAKE/TRIGGER systemUsing the MAKE/TRIGGER system To assign the functions to the pin terminalsOperation of the external control Functions controlled by the MAKE/TRIGGER systemUsing the serial communication Communication specificationsCommand outline Basic command listTroubleshooting Maintenance20 Self-check programGeneral SpecificationsInput/output terminals Front view Dimensions Unit mm inchSide view Page DT-V24L3D/DT-V20L3D Multi Format LCD Monitor

DT-V20L3D, DT-V24L3D specifications

The JVC DT-V24L3D and DT-V20L3D are professional broadcast monitors designed to cater to the demanding needs of video production environments. These monitors are particularly engineered to provide high-quality imaging that meets the rigorous standards of broadcast and production professionals.

One of the standout features of these monitors is their LCD technology, which offers remarkable brightness and color accuracy. The DT-V24L3D features a 24-inch display, while the DT-V20L3D has a slightly smaller 20-inch screen. Both monitors utilize a panel with a resolution of 1920 x 1200 pixels, ensuring that footage is presented in sharp detail. This high resolution is particularly beneficial for critical monitoring tasks, as it provides a clear representation of image quality.

Color reproduction is another highlight of these models. They support a wide color gamut, allowing users to view footage with accurate color representation that adheres to industry standards. Their ability to cover various color spaces, including Rec. 709 and others, ensures that color grading can be performed with confidence. The monitors also feature built-in 10-bit processing, which enhances color depth and transitions, making them suitable for HDR workflows.

In terms of connectivity, the DT-V24L3D and DT-V20L3D are equipped with a versatile array of inputs. They feature HDMI, SDI, and composite inputs, among others. This extensive compatibility allows them to be integrated into various studio setups and facilitates seamless connection with different types of equipment, making them ideal for multi-camera operations.

Both monitors are also designed with user-friendly controls, allowing operators to easily adjust settings for brightness, contrast, and color calibration. They come with various preset modes tailored for specific viewing conditions, which aids in achieving optimal visual performance.

Additionally, these models support advanced features such as waveform monitoring, vector scope, and a range of display assist tools that are vital for broadcast and production environments. This enables professionals to make informed decisions while monitoring live feeds or recordings.

Overall, the JVC DT-V24L3D and DT-V20L3D monitors deliver exceptional performance, advanced technology, and reliability that professionals demand in video production. Their combination of high-resolution screens, extensive connectivity, and comprehensive monitoring features make them invaluable tools for any broadcast and production workflow.
Top Page Image Contents