Adjusting Picture Pos./Size, Adjusting screen

Adjusting Picture Pos./Size

Adjusting screen

1 PICTURE POS. /SIZE

Press to display the Picture Pos./Size menu.

2	Press to select H-Pos/H-Size/V-Pos/V-
	Size/Clock Phase.

During “AV(S Video)” and	During “RGB” and “PC”
“Component” input signal.	input signal.

Picture Pos./Size		Picture Pos./Size
Normalise	Normal	Normalise	Normal
H-Pos		H-Pos
H-Size		H-Size
V-Pos		V-Pos
V-Size		V-Size
		Clock Phase

3	Press to adjust Pos./Size.

Press to exit from adjust mode.

		INPUT
	SURROUND
		VOL
N		R
PICTURE	SOUND	SET UP
MULTI
PIP	SWAP SELECT MOVE
PICTURE
POS. /SIZE		ASPECT
PC		OFF TIMER

PLASMA DISPLAYNotes:

(1)Adjustment details are memorized separately for different input signal

formats (Adjustments for component signals are memorized for 525 (480) / 60i

· 60p, 625 (575) / 50i · 50p, 1125 (1080) / 60i · 50i · 24p· 24sF, 1250 (1080) / 50i, 750 (720) / 60p · 50p each, and RGB signals are memorized for each frequency.)

(2)If a “Cue” or “Rew” signal from a VCR or DVD player is received, the picture position will shift up or down. This picture position movement cannot be controlled by the Picture Pos./Size function.

When the Position Left “” button is pressed. When the Position Right “” button is pressed.

H-Pos

When the Position Left “” button is pressed. When the Position Right “” button is pressed.

H-Size

When the Position Left “” button is pressed. When the Position Right “” button is pressed.

V-Pos

When the Position Left “” button is pressed. When the Position Right “” button is pressed.

V-Size

Clock Phase Flickering and distortion can be eliminated by using the Position Left “” or Right “” button (RGB/PC in Mode) to carry out adjustment.

Note: Using the size adjustment function to display a picture with the aspect ratio changed from the original for the purpose of the public display or commercial gain may infringe on copyright laws.

Helpful Hint ( N / Normalise Normalisation)

While the Picture Pos./Size display is active, if either the N button on the remote control is pressed at any time or the (ACTION button) is pressed during “Normalise”, then all adjustment values are returned to the factory settings.