JVC GD-V502PCE Colour system / Aspect Auto, Cinema reality, If the picture image becomes unstable

Setup for Input Signals
Colour system / Aspect Auto
Select Signal from the “Setup” menu during AV(S Video) input signal. (“Signal	Setup	1/2
[AV]” menu is displayed.)	Component/RGB-in select
		RGB
Press to select the “Colour System” or	Input label	RGB1
“Aspect Auto”.	Signal
	Screensaver
Press to select each functions.	Power save	Off
	Standby save	On
	Power management	Off
	OSD Language	English (UK)

	If the picture image becomes unstable:				Press		(ACTION) button
	With the system set on Auto, under conditions of				Signal				[ AV ]
	low level or noisy input signals the image may in
					3D Y/C Filter (NTSC)
	rare cases become unstable. Should this occur, set								On
					Colour system				Auto
	the system to match the format of the input signal.
					Cinema reality				Off
					Aspect Auto	(4:3)
								4 : 3
Mode			Function
Colour system	Set the colour system to match that of the input signal.
	If set to “Auto”, the colour system is automatically selected from “PAL”, “SECAM” and “NTSC”,
	but not from “M-NTSC”. To view M-NTSC format pictures, you must manually set to “M-NTSC”.
	Auto	PAL	SECAM	M.NTSC		NTSC
Aspect Auto	Set to “4 : 3” to view 4:3 images in an unchanged format when Aspect Auto is selected.
(4:3)	If you would like to view 4:3 images in Just format, set to “Just”.

Cinema reality

When on, the display attempts to reproduce a more natural interpretation of sources such as movie pictures, which are recorded at 24 frames per second.

If the picture is not stable, turn the setting to off.	Setup		1/2
Select “Signal” from the “Setup” menu during AV(S Video) or Component	Component/RGB-in select		RGB
input signal.(“Signal [AV]” or “Signal [Component]” menu is displayed.)	Input label	Signal	RGB1
Press to select Cinema reality.
		Screensaver
	Power save		Off
Press to set On/Off.	Standby save		On
	Power management		Off
	OSD Language		English (UK)
	Press	(ACTION) button

R

Press to exit from adjust mode.

Note:

When On, this setting only affects the following signal input:

•NTSC / PAL signal input during “AV(S Video)” input signal.

•525i(480i) 625i(575i) signal input during “Component” input signal.

Signal	[ AV ]
3D Y/C Filter (NTSC)	On
Colour system	Auto
Cinema reality	Off
Aspect Auto (4:3)	4 : 3

Signal		[	Component	]
Cinema	reality		Off

31