Onkyo PR-SC5508 instruction manual Lock Setup, Using the Audio Settings

Page 62

Auto Power Down

Auto Power Down

`Off:

Auto Power Down disabled.

`On:

Auto Power Down enabled.

When “Auto Power Down” is set to “On”, AV controller will automatically perform STANDBY operation if there is no operation for 30 minutes with no audio and no video signal input.

Auto Power Down” will display on the display and OSD from 30 seconds before the Auto Power Down functions. Default setting: On (European and Asian models), Off

(North American models)

Note

Depending on some sources, the auto power-down function may activate during playback.

The Auto Power Down function does not work when Zone 2 or Zone 3 is on.

Network

See “Network Settings” (71).

Firmware Update

See “Firmware Update” for update procedure (104).

Note

Perform the firmware update only when an announcement is posted on the Onkyo web site. See the Onkyo web site for latest information.

It takes about 60 minutes to complete the firmware update.

When updating a firmware from a USB mass storage device, the AV controller searches the device which is connected earlier dur- ing power on. If two devices have been connected at the time of power on, the AV controller will search the device on the front panel.

Version

The current version of the firmware is displayed.

Receiver

`via NET:

You can update the firmware via Internet. Check the network connection before update.

`via USB:

You can update the firmware from a USB mass stor- age device.

You can update the AV controller’s firmware. Do not shut- down the power of the AV controller while update.

Universal Port

`via NET:

You can update the firmware via Internet. Check the network connection before update.

`via USB:

You can update the firmware from a USB mass stor- age device.

You can update the Onkyo dock’s firmware. Do not shut- down the power of the AV controller while update.

En

Note

This update shall not be performed when no dock is connected to UNIVERSAL PORT jack.

Lock Setup

With this preference, you can protect your settings by locking the setup menus.

Main menu

Lock Setup

Setup

`Locked:

Setup menus locked.

`Unlocked:

Setup menus not locked.

When the setup menus are locked, you cannot change any setting.

Using the Audio Settings

You can change various audio settings from the Home menu (27).

 

 

1

Press RECEIVER followed by HOME.

2

Use q/wto select “Audio”, and then use q/w/e/r

 

to make the desired selection.

 

 

Note

These settings are disabled when the “Audio TV Out” setting is set to “On” (60) and an input selector other than HDMI is selected.

Tone Control Settings

You can adjust the bass for the front, front wide, front high, center, surround, surround back and subwoofer speakers and treble for the front, front wide, front high, center, surround and surround back speakers, except when the Direct, Pure Audio or THX listening mode is selected.

Bass

`–10dBto 0dB to +10dB in 2 dB steps.

You can boost or cut low-frequency sounds output.

Treble

`–10dBto 0dB to +10dB in 2 dB steps.

You can boost or cut high-frequency sounds output.

Operating on the AV controller

 

 

1

Press TONE on the AV controller repeatedly to

 

select either “Bass” or “Treble”.

2

Use Up rand Down eon the AV controller to

 

adjust.

 

 

Note

This setting is not available when the multichannel analog input is selected.

To bypass the bass and treble tone circuits, select the Direct, Pure Audio or THX listening mode.

62

Image 62
Contents Introduction Connections Advanced Operations Controlling iPod & Other ComponentsBoard above the apparatus shall be set 10 cm Always consider the environmental issues and follow10 cm 4 at the rear. The rear edge of the shelf or Away from the rear panel or wall, creating a flue-likePrecautions Installing the Batteries Supplied AccessoriesUsing the Remote Controller Aiming the Remote ControllerContents Miscellaneous FeaturesProcessing Analog RGB Video Input D-sub 15 for PCMusic Optimizer is a trademark of Onkyo Corporation THX Ultra2 PlusV.Color is a trademark of Sony Corporation Front Panel Pure Audio button Hdmi Thru indicatorFront & Rear Panels ON/STANDBY buttonPhones jack Zone 2, Zone 3 and OFF buttons Return button Setup MIC jackDisplay AUX Input jacks HDMI, VIDEO, Audio L/R and Digital 19Front L/R, CENTER, Surr L/R Rear PanelInput jacks Balance L/R 12V Trigger OUT A/B/C jacks Remote Controller Controlling the AV ControllerAbout Home Theater Enjoying Home TheaterSpeaker Configuration Connecting the AV ControllerConnecting Your Speakers Connecting a Power Amplifier with RCA InputsConnecting a Power Amplifier with XLR Inputs AV controller MultichannelBalanced XLR cable Using Dipole SpeakersConnecting the Powered Subwoofers Bi-amping the Front Speakers Speaker ImpedanceConnecting a Balanced Audio Source Stereo audio source with Balanced XLR outputAV Cables and Jacks About AV ConnectionsConnected image with AV components Hdmi cableAssignment can be changed 45 to Connecting Your Components with HdmiJack Signal Components Audio return channel ARC functionFront Rear Connecting Your ComponentsJack Signal Components Assignable Auto Power On Connecting Onkyo uComponentsHow to record the video Remote ControlNorth American European and Asian Models Connecting AntennaConnecting the Power Cord AC InletWhich Connections Should I Use? Monitor Out setting set to Hdmi Main or Hdmi SubMonitor Out setting set to Both, BothMain or BothSub Video Connection FormatsDepends on the Audio TV Out setting Monitor Out setting set to AnalogFor details, refer to Video Resolution Chart Audio Connection FormatsTurning On Standby indicatorTurning On/Off the AV Controller Turning OffTOR Setting the Display BrightnessDisplaying Source Information Muting the AV Controller Using the Sleep TimerUsing the Home Menu Starting Components Using Activities Using HeadphonesUsing Activities to Start Easy Macros Changing the Input DisplayUsing Audyssey MultEQ XT32 Audyssey MultEQ XT32 Room Correction and Speaker SetupRestoring Default Turning Off the ComponentsEnter Using a Powered Subwoofer Error MessagesChanging the Speaker Settings Manually Listening to the Radio Using the TunerTuning into Radio Stations Listening to the RadioPresetting FM/AM Stations Using RDS excluding North American modelsRDS program types PTY Finding Stations by Type PTYListening to Traffic News TP Recording Separate AV Sources Connecting a Recording ComponentRecording AV RecordingSelecting Listening Modes Using the Listening ModesListening Mode Buttons Input Source About Listening ModesExplanatory Notes Speaker LayoutListening Modes DTS-HD Master Resolution AudioDescription Input Speaker Source Layout DTS-HD High AudioListening Mode Description Input Speaker Source Layout Music *5 Modes can be usedNeural Digital Sources such as MP3s and Internet streamsOnkyo-Original DSP Listening Modes Common Procedures in Setup Menu Advanced SetupOn-screen Setup Menus MenuOUT Main Input/Output AssignMonitor Out BD/DVD, VCR/DVR, CBL/SAT, GAME, PC, Tape TV/CD, PHONO, Port ResolutionHdmi Input Component Video Input ` in 1, in 2,Digital Audio Input Analog Audio InputSpeaker Setup Speaker SettingsSpeaker Distance Level CalibrationBGC Equalizer SettingsTHX Audio Setup Dolby Audio AdjustMultiplex/Mono Half Mode Dolby VolumeVolume Leveler PLIIz Height GainSource Setup Dynamic Volume Reference LevelName Edit IntelliVolumeSync Picture Adjust Random NR*2*3*4*6 Resolution*2*4Mosquito NR*2*3*4*6 Block NR*2*3*4*6Listening Mode Preset DTS/DTS-ES/DTS-HD12V Trigger A/B/C Setup Volume SetupOSD Setup MiscellaneousRemote ID Hardware SetupSirius Settings North American models Multi ZoneAudio Return Channel Power ControlHdmi ControlRIHD TV ControlLock Setup Using the Audio SettingsSpeaker Levels Audyssey SettingsDolby Volume Music OptimizerAudio Selector Setting the Incoming Digital Signal Fixed ModeRe-EQ Network Requirements Connecting the AV ControllerAbout NET Listening to Other Internet Radio Listening to Internet RadioListening to vTuner Internet Radio Playing Music Files on a Server Registering Presets*1Station and Song Presets Items on the Internet Radio Top MenuWindows Media Player 11 Setup WAV Supported Audio File FormatsWMA AACServer Requirements Windows Media Player 12 SetupRemote Playback from Media Server/ Personal Computer About DlnaNetwork Settings Using Remote PlaybackDhcp USB Mass Storage Device Requirements List of the device’s contents appearsAbout USB Playing Music Files on a USB DeviceFolder1 02SongTrack2 Artist Album 011234 Multi Zone Connecting ZoneConnecting Your Zone 2 Speakers Zone 2 Video OutputZone 2 Maximum Volume, Zone 3 Maximum Volume Setting the Multi ZoneConnecting Your Zone 3 Speakers Zone 2 Out, Zone 3 OutControlling Zone 2/3 from the AV controller Using Zone 2/3Zone 2 Power On Volume, Zone 3 Power On Volume Zone 2 Component OutAdjusting the Tone and Balance of Zones Controlling Zone 2/3 with the Remote ControllerAdjusting the Volume for Zones Muting ZonesUsing the 12V Triggers Trigger OUT B and CUsing a Multiroom Kit with Other Components Using a Multiroom Kit with Zone 2/3Using a Multiroom Kit with a Cabinet Playing Music Files on the iPod/iPhone Standard Mode controlExtended Mode control Top screen listOnkyo Dock Cable Connecting an Onkyo DockModels sold are different depending on the region Using the Onkyo Dock UP-A1 DockWithout the RI Control Controlling Your iPodRI Dock With the RI ControlUDock Available buttonsOnkyo Dock Buttons UP-A1 Dock E/rENTER PLAYLISTe/rControlling Other Components Preprogrammed Remote Control CodesLooking up for Remote Control Code Or if you are not sure about the exact model Use q/wto select Search by model numberVia network, and then press Enter Select Skip, and then press EnterRemote Mode BD/DVD Entering Remote Control CodesRemote Control Codes for Onkyo Components Connected via u TapeYou can reset the remote controller to its default settings Resetting Remote Mode ButtonsResetting the Remote Controller Controlling Other ComponentsTV VOL q/w Components ButtonsCassettetape deck CH + Disc +Activities Setup Following buttons cannot learn new commands Learning CommandsTo learn more commands, repeat steps 2 Remote MODE, ALL OFF, MY MOVIE, MY TV, MY Music and ModeMaking Macros Using Normal MacrosDeleting Learning Commands Running MacrosCan’t turn on the AV controller TroubleshootingStandby indicator flashes red There’s no sound, or it’s very quietAbout DTS signals There’s no sound with a certain signal formatCan’t select the Pure Audio listening mode Only the center speaker produces soundThere’s no picture from a source connected to an Hdmi Remote controller doesn’t workThere’s no picture On-screen menus don’t appearCan’t access the music files on a USB device Can’t learn commands from another remote controllerCan’t access the server or Internet radio Stand-by power consumptionDisplay doesn’t work Sound changes when I connect my headphonesSpeaker distance cannot be set as required How do I change the language of a multiplex sourceImportant Note Regarding Video Playback Nent Video Monitor OUTVideo Section SpecificationsAmplifier Section Tuner SectionAbout Copyright Protection About HdmiSupported Audio Formats Operations that can be performed with p connection Using an RIHD-compatible TV, Player, or RecorderAbout p-compatible components Confirm the settings How to connect and setupConfirm the connecting and setting Operate with the remote controllerUpdating the Firmware via Network Firmware UpdateUpdate procedure Before you startUpdating the Firmware via USB TroubleshootingErrors during update via network Errors during update via USB Video Resolution Chart OutputOnkyo Europe Electronics GmbH Onkyo Europe Electronics GmbH UK Branch