Onkyo PR-SC5508 Connecting a Power Amplifier with XLR Inputs, AV controller Multichannel

Note

*1 Specify crossover frequency for the channel that you want to output in “Speaker Configuration” (➔ 48).

*2 If you use the front high and wide speakers at the same time, you need to set the “Front High + Front Wide” setting to “Yes” (➔ 48).

Connecting a Power Amplifier with XLR Inputs

You can connect the AV controller to a multichannel power amplifier with balanced XLR input jacks by using several XLR audio cables.

The AV controller’s balanced PRE OUT jacks are wired as shown.

See your multichannel power amplifier’s instruction manual for more information on connecting speakers.

AV controller

								Multichannel
								power amplifier
FRONT HIGH/								FRONT HIGH/
FRONT WIDE	SURROUND BACK	SURROUND	FRONT	CENTER	FRONT	SURROUND	SURROUND BACK	FRONTWIDE
RIGHT	RIGHT	RIGHT	RIGHT		LEFT	LEFT	LEFT	LEFT
INPUT	INPUT	INPUT	INPUT	INPUT	INPUT	INPUT	INPUT	INPUT
SELECT	SELECT	SELECT	SELECT	SELECT	SELECT	SELECT	SELECT	SELECT

OUTPUT OUTPUT OUTPUT OUTPUT OUTPUT

SPEAKER IMPEDANCE

4 OHMS MIN. PER EACH SPEAKER TERMINAL

FUSE AC INLET

OUTPUT OUTPUT OUTPUT OUTPUT

12V TRIGGER		SEVEN CHANNEL AMPLIFIER
IN	OUT	MODEL NO. RDA-7.1

	Front high/	Surround	Surround	Front right	Center	Front left	Surround	Surround	Front high/
	Front wide	back/Front	right	speaker	speaker	speaker	left	back/Front	Front wide
	right speaker*1	wide right	speaker				speaker	wide left	left speaker*1
		speaker*2						speaker*2
Note
*1	Specify crossover frequency for the channel that you want to output in “Speaker Configuration” (➔ 48).
*2	If you use the front high and wide speakers at the same time, you need to set the “Front High + Front Wide” setting to “Yes”
	(➔ 48).

En

14