JVC GV-PT2 manual About Blank Paper Sheet Sets optional, SET Contents Uses

EN 15

About Blank Paper Sheet Sets (optional)

You must use one of the sets shown in the following chart:

SET	CONTENTS	USES
PV-50SFAE	• Standard Print Paper (50 Sheets)	Print your favorite images, just like
(Standard type)	• Ink Cassette (50 Prints)	snapshots.
PV-25SFSAE	• 1-Picture Single-Print Sticker	Make customized seals and stick
(Sticker type)	Paper (15 Sheets)	them on greeting cards, envelopes,
	• 16-Picture Multi-Print Sticker	letters, etc.
	Paper (10 Sheets)
	• Ink Cassette (25 Prints)

Before Printing

●Do not touch printing side of the paper.

●Do not use paper that is torn or curled, as this can result in paper jamming.

●Do not use paper that is wet or damp. Printing may not be possible and paper jamming may occur.

●Do not touch or pull out the ink cassette’s ink sheet.

●Keep young children away from the ink cassette’s ink sheet.

●When the ink cassette is empty, replace it with a new one. An empty ink cassette cannot be used. Do not try to rewind and re-use cassette.

●Do not expose the paper to high tempera- tures, high humidity and/or direct sunlight.

●You can write on one side of a PV-50SFAE print sheet.

●If you want to write something or stick a stamp on a PV-50SFAE sheet, wait until printing is finished. If you write something or stick something on before printing, the printer may not work properly.

●Carefully read the precautions in the blank paper sheet set box and on the back of the blank sheet set before using.

After Printing

●If you touch a fresh print with wet hands, the print image may be discolored.

●If a print absorbs organic cleaning solvents (alcohol, ester, keton, etc.), the colours will fade.

●If cellophane tape or soft PVC are affixed to a print, the chemical reaction will cause accelerated colour fading.

●When writing on a PV-50SFAE print sheet, be sure to use a pencil or an oil-based writing utensil. If you apply too much pressure, you’ll leave imprints on the print sheet.

Storage

●Avoid storing prints in areas subject to high temperatures or humidity, or near a heater or heat-generating device.

●Do not store prints in a soft plastic folder. Accelerated colour fading may result due to the chemical reaction, or the print(s) may stick to the file.

●Do not store 2 prints with the printed sides touching, as the sheets may stick together.

●Store print paper in its box, on a level surface. Failure to do so may cause the print paper to curl or bend, which can result in a paper jam within the unit.