JVC GV-PT2 manual 66 EN

Page 67

66EN

TROUBLESHOOTING(cont.)

WHAT TO DO IF ANY OF THE MESSAGES BELOW APPEAR

PC PRINTER MODE

Message

⬤ Appears when:

Page

⬛ Action:

 

 

Failed in connecting

⬤ Printer power is not on, printer is improperly

48

with a printer.

connected, or BIOS setting is not correct.

50

Check printer type,

⬛ Turn the printer power on after checking to make

cable connection,

sure connections are correct.

 

and power.

 

 

Close back door.

⬤ The jammed paper removing door is not fully

 

Open output tray.

closed.

 

Set paper tray.

⬛ Close the jammed paper removing door.

 

 

⬤ The paper tray is not inserted properly.

16

 

⬛ Insert the paper tray.

 

 

⬤ The output tray is closed.

 

 

⬛ Open the output tray.

 

No ink cassette

⬤ The ink cassette is not installed or is improperly

 

loaded. Set ink

installed.

14

cassette and close

⬛ Insert the ink cassette and close the door.

 

cover.

 

 

Paper is not compat-

⬤ Print sheets are not compatible with the ink

 

ible with ink

cassette model or the paper orientation is wrong.

69

cassette. Open back

⬛ Open the jammed paper removing door and

 

door and remove

remove the jammed paper.

 

paper.

Make sure that the print paper is compatible with

15

 

the ink cassette model.

 

PC mode is selected.

⬤ With the printer ON LINE lamp on, [File]-[Capture

 

Switch to the

New] is selected on the Capture Utility window.

 

Capture mode.

⬛ Press and hold the printer ON LINE button for at

59

 

least 2 seconds to turn the lamp off. Then store the

 

 

 

image to be printed, select “CAPTURE” on the

 

 

MODE SELECT MENU and press OK.

 

Video printer mode

⬤ Capture is not selected on the MODE SELECT

 

is selected. Switch

MENU.

59

to the Capture

⬛ Store the image to be printed, select “CAPTURE”

 

mode.

on the MODE SELECT MENU and press OK.

 

 

 

 

Page 66 Page 68
Image 67
Page 66 Page 68
Contents GV-PT2 Safety Precautions Above ALL Some Dos And Donts On The Safe Use Of EquipmentAbout Thermal Heads Editing Index Inset PrintTitle Impose Print Strobe PrintBUILT-IN Capture Facility Layout PrintContents Control Unit Paper Tray Blank Paper Sheet Set RemoteFloppy Disk # Video Input Connector Error lamp INK lampRemote Control Signal Receiver Remote Pause connector @ S-Video Input ConnectorVideo Output Connector Parallel ConnectorService Door for Jammed Paper Removal Jlip Joint Level Interface Protocol ConnectorTransmitter Source select button Title button 10 ENMenu control button Cursor control button OK button Compartment. Align the batteries as shown Place two R6 batteriesUse two R6 batteries EN C Onnections Image source with Video output connectors 14 EN When removing ink cassetteAbout Blank Paper Sheet Sets optional SET Contents UsesOpen the lid while pushing a Opening the paper trayInserting blank paper sheets in the paper tray Loading/unloading the paper trayPreparation EN Select Layout and NO. of Scenes PreparationPress OK If you store the wrong image or store an image incorrectly Press Memory When the DE- Sired Image AppearsTo print a live image using a camcorder as the source Press PrintPrint menu display Setting with remote control unitPress Menu Select Layout Multi-Print Same Scene 22 ENPress Format Printing Print Lamp blinks, indicating that printingHas started Now printing!! appears on screen duringMulti-Print Different Scenes 24 ENBefore the scene Begin Source PlaybackFast-forward or rewind the source tape to find Desired scene, then start playback a littleMulti-Print Different Scenes Sticker Type Print Press ModeMode Select Menu appears on the monitor 26 ENIf you store a wrong image or store an image incorrectly Press Memory When the Desired Image AppearsTo exit Editing Index mode Title Impose Print is not availableSelect Horizontal on Layout and Select OFF on Multi 28 ENInset Print Store the main sceneIf you store the wrong sub scene Select 4 or 16 on Multi and Select Different on ContentStore the sub scene If you store the wrong main sceneStrobe Print 30 ENPress Memory When the DE- Sired Image Appears Vertical Layout Print 32 ENSelect Vertical on Layout Image to be stored Press cursor buttons / to choose the options 34 ENVideo Cassette Label Print Selectout Video Cassette on LAYFirst cut out the labels and then stick onto video cassettes To affix labels on video cassettesName Sticker Print 36 ENPress Memory When the DE- Sired Image Appears Calendar Print 38 ENStore the Desired Image in Memory Press OK Button SET YEAR/MONTH of CalendarIf you store the wrong calendar SET EDIT-IN or EDIT-OUT Point of the Scene to be Stored 40 ENEditing Index Connect Image Source Camcorder or VCR to Printer page 12Sequence for memory Choose Editing IndexSnapshot Print 42 ENPress the CAMCORDER’S Snap Select Snap Shot PrintingShot Button Title Impose Print 44 ENRecord Title or Drawing with Your Camcorder If you want to change Colour or Erase title when printing is finishedChoose NEGATIVE/POSITIVE of the Title If you want to change the title46 EN Using The Attached Collection Of Superimpose PatternsShooting a pattern Personal Computer Printer Section Bi-Directional 25-pin printer interface 486DX2 or higher CPU EN Introd UctionWindow EditFormat ImageVideo cable option To Video Output connector To S-VIDEOPersonal Computer Connector Printer Front panel jackTo S-VIDEO Input connector To Video Input connector Rear panel jack To VideoEN INS T Alling T HE Software Setting upRun Windows 3.1 offers a number of ways to launch an application 54 ENMaximize button Closing the Program56EN Each menu is configured as shown belowRotate 90 clockwise Tile Cascade 58 ENArrange Icons Press OK Printing ProcedureExample 60 ENTo start printing Call up the printer setup display setup dialogNo. of prints Print orientation Print orientation Select when printingImage adjustment CancelMessage box Displays the current status Control button File name box64 EN Close back door PC mode is selectedVideo printer mode Paper jammed66 EN PC mode To the PC modeCapture mode is Selected. Switch to68 EN Slot of the paper tray If no paper is jammedIf no paper is jammed in the output tray Connectors PowerPower consumption SignalPg ,43,59 Error MessagesPg ,23-43 LayoutMEM O Memo GV-PT2
Top Page Image Contents