JVC GV-PT2 manual Press Memory When the DE- Sired Image Appears, Press Print

Page 20

Image on the TV monitor

The area within the broken line is stored in memory.

EN 19

5 PRESS MEMORY WHEN THE DE- SIRED IMAGE APPEARS

•The image is stored in memory and appears on the screen.

•If MEMORY display is unstable, press FRAME STABILISER button to call up “F.STABILISER” on TV screen to stabilize the frame.

6 PRESS PRINT

•Print Lamp blinks, indicating that printing has started.

•“Now printing!!” appears on screen during printing.

•When the printed sheets are delivered to the output tray and “Now printing!!” disappears, printing is complete. Do not leave more than 25 printed sheets stacked on the tray.

When printed on sticker-type paper, pictures are printed slightly beyond the sticker borders.

Output tray

Print lamp

If you want to switch between the input image and the stored image ...

press SOURCE. Each time you press the button, the displayed image alternates between the input image and the stored image. This function is not available during printing.

If you store the wrong image or store an image incorrectly ...

press SOURCE to call up the INPUT display, then find the correct image and store it in memory. The incorrect image will be deleted and the new image be stored.

FRAME STABILISER

With a “squeezed” video input signal, switching between ON/OFF of FRAME STABILISER is not available. Enter the pause mode on the video unit, make sure that there is no noise or fluctuation on the frame and store the scene in memory.

If you want to print multiple copies of the same scene ...

select the number of print copies on the PRINTER MENU screen. You can select up to 25 copies (page 20). When printing two or more copies, you can press the CANCEL button on the remote control unit at any time to stop print operation after finishing the currently printing page. “Remaining sheets: 5” appears on the monitor screen.

To print a “live” image using a camcorder as the source ...

in step 4, instead of playing back the source tape, engage the camcorder’s Record mode.

Image 20
Contents GV-PT2 Safety Precautions Some Dos And Donts On The Safe Use Of Equipment Above ALLAbout Thermal Heads Inset Print Title Impose PrintStrobe Print Editing IndexLayout Print BUILT-IN Capture FacilityContents Floppy Disk Paper Tray Blank Paper Sheet Set RemoteControl Unit Error lamp INK lamp Remote Control Signal Receiver Remote Pause connector@ S-Video Input Connector # Video Input ConnectorParallel Connector Service Door for Jammed Paper RemovalJlip Joint Level Interface Protocol Connector Video Output ConnectorMenu control button Cursor control button OK button 10 ENTransmitter Source select button Title button Use two R6 batteries Place two R6 batteriesCompartment. Align the batteries as shown EN C Onnections Image source with Video output connectors When removing ink cassette 14 ENSET Contents Uses About Blank Paper Sheet Sets optionalOpening the paper tray Inserting blank paper sheets in the paper trayLoading/unloading the paper tray Open the lid while pushing aPreparation EN Press OK PreparationSelect Layout and NO. of Scenes Press Memory When the DE- Sired Image Appears To print a live image using a camcorder as the sourcePress Print If you store the wrong image or store an image incorrectlyPress Menu Setting with remote control unitPrint menu display Select Layout Press Format 22 ENMulti-Print Same Scene Print Lamp blinks, indicating that printing Has startedNow printing!! appears on screen during Printing24 EN Multi-Print Different ScenesBegin Source Playback Fast-forward or rewind the source tape to findDesired scene, then start playback a little Before the scenePress Mode Mode Select Menu appears on the monitor26 EN Multi-Print Different Scenes Sticker Type PrintPress Memory When the Desired Image Appears To exit Editing Index modeTitle Impose Print is not available If you store a wrong image or store an image incorrectly28 EN Inset PrintStore the main scene Select Horizontal on Layout and Select OFF on MultiSelect 4 or 16 on Multi and Select Different on Content Store the sub sceneIf you store the wrong main scene If you store the wrong sub scene30 EN Strobe PrintPress Memory When the DE- Sired Image Appears Select Vertical on Layout 32 ENVertical Layout Print Image to be stored 34 EN Video Cassette Label PrintSelectout Video Cassette on LAY Press cursor buttons / to choose the optionsTo affix labels on video cassettes First cut out the labels and then stick onto video cassettes36 EN Name Sticker PrintPress Memory When the DE- Sired Image Appears Store the Desired Image in Memory 38 ENCalendar Print If you store the wrong calendar SET YEAR/MONTH of CalendarPress OK Button 40 EN Editing IndexConnect Image Source Camcorder or VCR to Printer page 12 SET EDIT-IN or EDIT-OUT Point of the Scene to be StoredChoose Editing Index Sequence for memory42 EN Snapshot PrintShot Button Select Snap Shot PrintingPress the CAMCORDER’S Snap Record Title or Drawing with Your Camcorder 44 ENTitle Impose Print Erase title when printing is finished Choose NEGATIVE/POSITIVE of the TitleIf you want to change the title If you want to change Colour orShooting a pattern Using The Attached Collection Of Superimpose Patterns46 EN Personal Computer Printer Section EN Introd Uction Bi-Directional 25-pin printer interface 486DX2 or higher CPUEdit FormatImage WindowTo Video Output connector To S-VIDEO Video cable optionConnector Printer Front panel jack To S-VIDEO Input connector To Video Input connectorRear panel jack To Video Personal ComputerSetting up EN INS T Alling T HE SoftwareRun 54 EN Windows 3.1 offers a number of ways to launch an applicationClosing the Program Maximize buttonEach menu is configured as shown below 56ENRotate 90 clockwise Arrange Icons 58 ENTile Cascade Printing Procedure Press OK60 EN ExampleCall up the printer setup display setup dialog To start printingPrint orientation Select when printing Image adjustmentCancel No. of prints Print orientationFile name box Message box Displays the current status Control button64 EN PC mode is selected Video printer modePaper jammed Close back door66 EN To the PC mode Capture mode isSelected. Switch to PC mode68 EN If no paper is jammed in the output tray If no paper is jammedSlot of the paper tray Power Power consumptionSignal ConnectorsError Messages Pg ,23-43Layout Pg ,43,59MEM O Memo GV-PT2