JVC GV-PT2 manual 64 EN

Page 65

64EN

TROUBLESHOOTING

WHAT TO DO IF ANY OF THE MESSAGES BELOW APPEAR

VIDEO PRINTER MODE

Message

Appears when:

Page

Action:

 

 

Please wait.

Power is turned on.

 

 

Printer internal temperature rises. The message

 

may remain for about 3 minutes until the printer

 

 

 

has cooled down.

 

Set ink cassette and

Ink cassette not set or improperly set.

 

close cover.

Insert the ink cassette until it clicks and close the

14

 

cover.

 

Set paper tray.

Paper tray is not inserted correctly.

16

 

Place blank paper sheets on the paper tray and

 

insert it correctly.

 

Open output tray.

Output tray is closed.

8

 

Open the output tray.

 

 

Paper is not compat-

Print sheets are not compatible with the ink

 

ible with ink

cassette model or the print paper orientation is

 

cassette.

wrong.

69

Open back door and

Open the jammed paper removing door and

 

remove paper.

remove the jammed sheet. Make sure that the

15

 

blank paper sheets are compatible with the ink

 

 

cassette model.

 

Pull out paper tray

Paper tray is running out of paper or paper feed is

 

and check paper.

not working improperly.

16

 

Remove the paper tray and correctly set print

 

 

 

sheets.

 

Replace ink cassette.

Ink cassette is consumed.

 

Pull out paper tray

Replace with a new one.

14

and check paper.

 

 

Now printing!!

During printing.

Number of sheets: 1

 

 

 

 

 

 

Image 65
Contents GV-PT2 Safety Precautions Above ALL Some Dos And Donts On The Safe Use Of EquipmentAbout Thermal Heads Title Impose Print Inset PrintStrobe Print Editing IndexBUILT-IN Capture Facility Layout PrintContents Floppy Disk Paper Tray Blank Paper Sheet Set RemoteControl Unit Remote Control Signal Receiver Remote Pause connector Error lamp INK lamp@ S-Video Input Connector # Video Input ConnectorService Door for Jammed Paper Removal Parallel ConnectorJlip Joint Level Interface Protocol Connector Video Output ConnectorMenu control button Cursor control button OK button 10 ENTransmitter Source select button Title button Use two R6 batteries Place two R6 batteriesCompartment. Align the batteries as shown EN C Onnections Image source with Video output connectors 14 EN When removing ink cassetteAbout Blank Paper Sheet Sets optional SET Contents UsesInserting blank paper sheets in the paper tray Opening the paper trayLoading/unloading the paper tray Open the lid while pushing aPreparation EN Press OK PreparationSelect Layout and NO. of Scenes To print a live image using a camcorder as the source Press Memory When the DE- Sired Image AppearsPress Print If you store the wrong image or store an image incorrectlyPress Menu Setting with remote control unitPrint menu display Select Layout Press Format 22 ENMulti-Print Same Scene Has started Print Lamp blinks, indicating that printingNow printing!! appears on screen during PrintingMulti-Print Different Scenes 24 ENFast-forward or rewind the source tape to find Begin Source PlaybackDesired scene, then start playback a little Before the sceneMode Select Menu appears on the monitor Press Mode26 EN Multi-Print Different Scenes Sticker Type PrintTo exit Editing Index mode Press Memory When the Desired Image AppearsTitle Impose Print is not available If you store a wrong image or store an image incorrectlyInset Print 28 ENStore the main scene Select Horizontal on Layout and Select OFF on MultiStore the sub scene Select 4 or 16 on Multi and Select Different on ContentIf you store the wrong main scene If you store the wrong sub sceneStrobe Print 30 ENPress Memory When the DE- Sired Image Appears Select Vertical on Layout 32 ENVertical Layout Print Image to be stored Video Cassette Label Print 34 ENSelectout Video Cassette on LAY Press cursor buttons / to choose the optionsFirst cut out the labels and then stick onto video cassettes To affix labels on video cassettesName Sticker Print 36 ENPress Memory When the DE- Sired Image Appears Store the Desired Image in Memory 38 ENCalendar Print If you store the wrong calendar SET YEAR/MONTH of CalendarPress OK Button Editing Index 40 ENConnect Image Source Camcorder or VCR to Printer page 12 SET EDIT-IN or EDIT-OUT Point of the Scene to be StoredSequence for memory Choose Editing IndexSnapshot Print 42 ENShot Button Select Snap Shot PrintingPress the CAMCORDER’S Snap Record Title or Drawing with Your Camcorder 44 ENTitle Impose Print Choose NEGATIVE/POSITIVE of the Title Erase title when printing is finishedIf you want to change the title If you want to change Colour orShooting a pattern Using The Attached Collection Of Superimpose Patterns46 EN Personal Computer Printer Section Bi-Directional 25-pin printer interface 486DX2 or higher CPU EN Introd UctionFormat EditImage WindowVideo cable option To Video Output connector To S-VIDEOTo S-VIDEO Input connector To Video Input connector Connector Printer Front panel jackRear panel jack To Video Personal ComputerEN INS T Alling T HE Software Setting upRun Windows 3.1 offers a number of ways to launch an application 54 ENMaximize button Closing the Program56EN Each menu is configured as shown belowRotate 90 clockwise Arrange Icons 58 ENTile Cascade Press OK Printing ProcedureExample 60 ENTo start printing Call up the printer setup display setup dialogImage adjustment Print orientation Select when printingCancel No. of prints Print orientationMessage box Displays the current status Control button File name box64 EN Video printer mode PC mode is selectedPaper jammed Close back door66 EN Capture mode is To the PC modeSelected. Switch to PC mode68 EN If no paper is jammed in the output tray If no paper is jammedSlot of the paper tray Power consumption PowerSignal ConnectorsPg ,23-43 Error MessagesLayout Pg ,43,59MEM O Memo GV-PT2