IntelliVolume, A/V Sync, Name Edit, Enter

About Audyssey Dynamic Volume®

Audyssey Dynamic Volume solves the problem of large variations in volume level between television programs, commercials, and between the soft and loud passages of movies. Dynamic Volume looks at the preferred volume setting by the user and then monitors how the volume of program material is being perceived by listeners in real time to decide whether an adjustment is needed. When- ever necessary, Dynamic Volume makes the necessary rapid or gradual adjustments to maintain the desired playback volume level while optimizing the dynamic range. Audyssey Dynamic EQ® is integrated into Dynamic Volume so that as the playback volume is adjusted automatically, the perceived bass response, tonal balance, surround impression, and dialog clarity remain the same whether watching movies, flipping between television channels, or changing from stereo to surround sound content.

IntelliVolume

■IntelliVolume

`–12dBto 0dB to +12dB in 1 dB steps.

With IntelliVolume, you can set the input level for each input selector individually. This is useful if one of your source components is louder or quieter than the others. Use e/rto set the level.

If a component is noticeably louder than the others, use e to reduce its input level. If it’s noticeably quieter, use rto increase its input level.

A/V Sync

■A/V Sync

`0ms to 250ms in 5 ms steps.

When using your DVD player’s progressive scanning function, you may find that the picture and sound are out of sync. With the A/V Sync setting, you can correct this by applying a delay to the audio signal.

To view the TV picture while setting the delay, press

ENTER.

To return to the previous screen, press RETURN.

If HDMI Lip Sync is enabled (➔ 54) and your TV or dis- play supports HDMI Lip Sync, the displayed delay time will be the summation of the A/V Sync delay time and the HDMI Lip Sync delay time. The HDMI Lip Sync delay time is displayed underneath in parentheses.

Note

•A/V Sync is disabled when the Pure Audio listening mode is selected, or when the Direct listening mode is used with an ana- log input source.

•“A/V Sync” is not operable when the input selector is set to “NET/USB”.

Name Edit

You can enter a custom name for each individual input selector (excluding TUNER) and radio preset for easy identification. When entered, the custom name will appear on the display.

The custom name is edited using the character input screen.

■Name

1Use q/w/e/rto select a character, and then press ENTER.

Repeat this step to enter up to 10 characters.

2When you’ve finished, to store a name, be sure to use q/w/e/rto select “OK”, and then press

ENTER. Otherwise it will not be saved.

Name input area

4 - 4. Name Edit

BD/DVD

Name

–

{

}

Shift

Space

Back Space

+10

Shift

CLR

All Erase

A B C D E F G H

J K L M

N O P Q R S T U V W X Y Z

(

)

[

]

;

’

Shift

Space

Back Space

+10

Shift

CLR

All Erase

Shift*1:

Switches the displayed character.

Space:

Enters a space character.

(Left)/ (Right):

Selected when the cursor is moved within the Name input area.

Back Space*2:

“Back Space” moves the cursor backward one char- acter space. In addition, “Back Space” deletes the character to the left of the cursor.

OK:

Selects when the entry is complete.

Tip

*1 You can also be performed on the remote controller by using +10.

*2 Press CLR on the remote controller, you can delete all characters in the input.

To correct a character:

1 Use q/w/e/rto select “ ”(Left) or “ ”(Right), and then press ENTER.


2	Press ENTER several times to select the incor-
	rect character (The cursor moves one letter
	each time ENTER is pressed).

3	Use q/w/e/rto select the correct character,
	and then press ENTER.