Onkyo HT-RC270 Video, Tuner, Remote Controller, There’s no picture, troller mode, first

Page 84
Video

When playing DTS program material, using the

—

pause, fast forward, or fast reverse function on your

 

player may produce a short audible noise. This is not

 

amalfunction.

■The beginning of audio received by an HDMI IN can’t be heard

Since it takes longer to identify the format of an

—

HDMI signal than it does for other digital audio sig-

 

nals, audio output may not start immediately.

 

Video

■ There’s no picture

Make sure that all video connecting plugs are pushed

17

in all the way.

 

 

 

Make sure that each video component is properly

18, 19,

connected.

72

If your TV is connected to the HDMI OUT, select

42

“- - - - -” in the “HDMI Input” setup to watch com-

 

posite video, and component video sources.

 

 

 

If the video source is connected to a component

19, 42

video input, you must assign that input to an input

 

selector, and your TV must be connected to either

 

the HDMI OUT or COMPONENT VIDEO MONI-

 

TOR OUT.

 

If the video source is connected to a composite video

19

input, your TV must be connected to the HDMI

 

OUT or the corresponding composite video output.

 

 

 

If the video source is connected to an HDMI input,

18, 42

you must assign that input to an input selector, and

 

your TV must be connected to the HDMI OUT.

 

While the Pure Audio listening mode is selected, the

—

video circuitry is turned off and only video signals

 

input through HDMI IN can be output.

 

 

 

On your TV, make sure that the video input to which

—

the AV receiver is connected is selected.

 

 

 

■There’s no picture from a source connected to an HDMI IN

Reliable operation with an HDMI-to-DVI adapter is 88 not guaranteed. In addition, video signals from a PC are not guaranteed.

When the Resolution is set to any resolution not sup- 42 ported by the TV, no video is output by the HDMI outputs.

If the message “Resolution Error” appears on the — AV receiver’s display, this indicates that your TV

does not support the current video resolution and you need to select another resolution on your DVD player.

■The on-screen menus don’t appear

On your TV, make sure that the video input to which — the AV receiver is connected is selected.

When the AV receiver doesn’t connect TV with

—

HDMI, onscreen menus are not displayed.

 

 

 

■The on screen display does not appear

 

Depending on the input signal, the on screen display 53

 

may not appear when the input signal from the

 

HDMI IN is output to a device connected to the

En

HDMI OUT.

Tuner

■Reception is noisy, FM stereo reception is noisy, or the FM STEREO indicator doesn’t light

Relocate your antenna.

—

Move the AV receiver away from your TV or com-

—

puter.

 

Listen to the station in mono.

32

 

 

When listening to an AM station, operating the

—

remote controller may cause noise.

 

Passing cars and airplanes can cause interference.

—

 

 

Concrete walls weaken radio signals.

—

 

 

If nothing improves the reception, install an outdoor — antenna.

Remote Controller

■The remote controller doesn’t work

Before operating this unit, be sure to press

—

RECEIVER.

 

 

 

Make sure that the batteries are installed with the

4

correct polarity.

 

Install new batteries. Don’t mix different types of

4

batteries, or old and new batteries.

 

 

 

Make sure that the remote controller is not too far

4

away from the AV receiver, and that there’s no

 

obstruction between the remote controller and the

 

AV receiver’s remote control sensor.

 

Make sure that the AV receiver is not subjected to

—

direct sunshine or inverter-type fluorescent lights.

 

Relocate if necessary.

 

 

 

If the AV receiver is installed in a rack or cabinet

—

with colored-glass doors, the remote controller may

 

not work reliably when the doors are closed.

 

Make sure you’ve selected the correct remote con-

11, 78

troller mode.

 

 

 

When using the remote controller to control other

—

manufacturers’ AV components, some buttons may

 

not work as expected.

 

Make sure you’ve entered the correct remote control

77

code.

 

 

 

Make sure to set the same ID on both the AV receiver

53

and remote controller.

 

 

 

■ Can’t control other components

If it’s an Onkyo component, make sure that the u

20

cable and analog audio cable are connected properly.

 

Connecting only an ucable won’t work.

 

 

 

Make sure you’ve selected the correct remote con-

11, 78

troller mode.

 

If you’ve connected a cassette tape deck, to the TV/

27

CD IN jack, or an RI Dock to the TV/CD IN or

 

GAME IN or VCR/DVR IN jacks, for the remote

 

controller to work properly, you must set the display.

 

 

 

If you cannot operate it, you will need to enter the

76

appropriate remote control code.

 

To control another manufacturer’s component, point

77

the remote controller at that component.

 

 

 

To control an Onkyo component that’s connected via

77

u, point the remote controller at the AV receiver.

 

Be sure to enter the appropriate remote control code

 

first.

 

 

 

84

Page 83 Page 85
Image 84
Page 83 Page 85
Contents Contents HT-RC270Instruction Manual AV ReceiverAVIS Important Safety InstructionsPrecautions For U.S. modelsFor Canadian Models Modèle pour les CanadienSupplied Accessories Using the Remote ControllerInstalling the Batteries Aiming the Remote ControllerContents IntroductionConnections Turning On & Basic OperationsFeatures AmplifierProcessing MiscellaneousTHX Select2 Plus Front & Rear Panels b cdefgij klm n o p u v w x yDisplay a b cd e f k l mna bcd Remote Controller Controlling the AV ReceiverAbout Home Theater Enjoying Home Theaterij kl de ghConnecting the AV Receiver Connecting Your SpeakersSpeaker Configuration Speaker Connection PrecautionsConnecting the Speaker Cables wires tightly, as shownUsing Banana Plugs Screw-typespeaker terminalsUsing Dipole Speakers Connecting a Powered SubwooferConnecting a Power Amplifier Bi-ampingthe Front SpeakersPower amplifier RightLeft speakerspeakerAbout AV Connections Connected image with AV componentsAV Cables and Jacks Connecting Your Components with HDMI Audio return channel ARC functionConnecting Your Components display when changing settingsConnecting Onkyo uComponents How to record the videoRemote Control Direct ChangeConnecting Antenna Insert wireInsert the plug fully into the jack PushWhich Connections Should I Use? Video Connection FormatsSignal Selection Audio Connection Formats Turning On/Off the AV Receiver Turning OnTurning Off Setting the Display Brightness Basic OperationsPlaying the Connected Component Displaying Source InformationUsing the Home Menu Using the Sleep TimerMuting the AV Receiver Selecting Speaker LayoutUsing Headphones Changing the Input DisplayUsing Easy Macros Restoring DefaultTurning Off the Components Changing Source ComponentAudyssey MultEQ Room Correction and Speaker Setup Using Audyssey MultEQFirst measurement position Second−Sixth measurement positions3 When you’ve finished making the settings, press 7 When prompted, repeat step`Cancel 9 Disconnect the speaker setup microphoneError Messages Changing the Speaker Settings ManuallyUsing a Powered Subwoofer `CancelUsing the Tuner Tuning into Radio StationsListening to the Radio Listening to the RadioPresetting FM/AM Stations Selecting PresetsDeleting Presets MODEConnecting a Recording Component RecordingRecording Separate AV Sources AV RecordingUsing the Listening Modes Selecting Listening ModesListening Mode Buttons PURE AUDIO button and indicatorAbout Listening Modes Explanatory NotesInput Source Speaker LayoutListening Modes Dolby PLIIx Movie• Dolby PLIIx Music • Dolby PLIIx GameListening Mode • Neo:6 Cinema• Neo:6 Music • THX Cinema • THX Music• THX Games THX Select2 CinemaOnkyo-OriginalDSP Listening Modes Use this mode when playing action game discsUse this mode when playing rock game discs Use this mode when playing sports game discsAdvanced Setup On-screenSetup MenusCommon Procedures in Setup Menu c 3. Audio Adjust d 4. Source SetupInput/Output Assign Monitor OutHDMI Input ResolutionComponent Video Input Digital Audio InputAnalog Audio Input BD/DVD, VCR/DVR, CBL/SAT, GAME, PC, AUXSpeaker Setup Speaker SettingsSpeaker Configuration Powered Zone2Speaker Distance Level CalibrationSurr Back Ch LPF of LFE Low-PassFilter for the LFE ChannelEqualizer Settings THX Audio SetupEqualizer Surr Back Speaker SpacingAudio Adjust Multiplex/MonoDolby Preserve THX SettingsSource Setup Theater-DimensionalAudyssey DSX LFE LevelDynamic Volume Reference LevelAudyssey Dynamic EQ Reference Level Offset `0dB `5dBIntelliVolume A/V SyncName Edit IntelliVolumePicture Adjust Game ModeWide Mode*1*2 Picture Mode*1*2Listening Mode Preset Edge Enhancement*2Noise Reduction*2 Brightness*1*2Hardware Setup Volume SetupOSD Setup MiscellaneousHDMI Audio TV OutLip Sync HDMI Control RIHDAuto Power Down Firmware UpdateNetwork Power ControlLock Setup Using the Audio SettingsTone Control Settings SetupAudyssey Settings Speaker LevelsMusic Optimizer Late NightSetting the Incoming Digital Signal Fixed Mode Audio SelectorAudio Selector Connecting the AV Receiver NET/USBAbout NET Network RequirementsListening to Internet Radio Listening to vTuner Internet RadioListening to Other Internet Radio ENTERRegistering Presets*1 Playing Music Files on a ServerStation and Song Presets Items on the Internet Radio Top MenuWindows Media Player 11 Setup Supported Audio File FormatsServer Requirements About DLNAWMA Lossless FLACWindows Media Player 12 Setup Using Remote PlaybackSupported Music File Formats Server RequirementsNetwork Settings ENTERMac Address DHCPAbout USB USB Mass Storage Device RequirementsPlaying Music Files on a USB Device Supported Audio File FormatsPlug your USB mass storage device into the AV receiver’s USB portPress NET/USB repeatedly to select the “USB” inputConnecting Zone Connecting Your Zone 2 Speakers to an Amp in ZoneZone Setting the Powered Zone Using ZoneControlling Zone 2 from the AV receiver ENTERControlling Zone 2 with the Remote Controller Adjusting the Volume for ZoneMuting Zone Operating with the remote controllerPlaying Music Files on the iPod/iPhone Connecting the iPod Directly to the USB Port3 Press DISPLAY to switch to Extended Mode*3 ENTERConnecting an Onkyo Dock Using the Onkyo Dock UP-A1DockUsing Your iPod models Alarm Clock Charging Your iPod models BatteryControlling Your iPod RI DockWithout the RI Control With the RI Controlg h i bj c k d e Standard modeExtended mode Music Extended mode VideoPreprogrammed Remote Control Codes Looking up for Remote Control CodeControlling Other Components ENTEREntering Remote Control Codes ENTERENTER REMOTE MODE • BD/DVD `31612Resetting REMOTE MODE Buttons Resetting the Remote ControllerControlling Other Components Controlling a TVai a j k b cl d em f g h n Learning Commands Using Normal MacrosDeleting Learning Commands Making Macros Deleting MacrosRunning Macros Press MY MOVIE, MY TV, or MY MUSICTroubleshooting PowerAudio The STANDBY indicator flashes redThere’s no sound with a certain signal format About DTS signalsOnly the front speakers produce sound Only the center speaker produces soundRemote Controller VideoTuner The remote controller doesn’t workRecording ZoneMusic Server and Internet Radio USB Mass Storage Device PlaybackVideo ATT:OFF: default The ufunctions don’t work• Video Attenuation CBL/SAT, GAME, or AUX inputSpecifications Amplifier SectionGeneral Video SectionAbout HDMI Supported Audio FormatsAbout Copyright Protection Using an RIHD-compatibleTV, Player, or Recorder About p-compatiblecomponentsHow to connect and setup 1Confirm the connecting and setting•Power Control: On •TV Control: On 3 Confirm the settingsVideo Resolution Chart NTSC/PALOutput 2 9 4 0 0 3 5 ONKYO U.S.A. CORPORATIONONKYO EUROPE ELECTRONICS GmbH ONKYO EUROPE ELECTRONICS GmbH UK BRANCH
Top Page Image Contents