Onkyo HT-RC270 Making Macros, Deleting Macros, Running Macros, Press MY MOVIE, MY TV, or MY MUSIC

Making Macros

Each ACTIVITIES can store one macro, and each macro can contain up to 32 commands.

ALL OFF	MY MOVIE,
	MY TV,
	MY MUSIC
	RECEIVER

Deleting Macros

1 While holding down HOME, press and hold down ALL OFF until ALL OFF lights (about 3 seconds).

2 Press ALL OFF again.

ALL OFF flashes twice.

Note

•It changes into Easy macro mode when the macro is deleted (➔ 28).

•When you using Normal macro mode, you cannot use the easy macro command including the change of the source component.

1 While holding down RECEIVER, press and hold down MY MOVIE, MY TV, or MY MUSIC until MY MOVIE, MY TV, or MY MUSIC lights (about 3 seconds).

2 Press the buttons whose actions you want to pro- gram into the macro in the order you want them performed.

For the CD example above, you’d press the following buttons: ON, TV/CD, 1.

Note

• MODE is invalid at macro making operation.

3 When you’ve finished, press ACTIVITIES again. ACTIVITIES button flashes twice.

If you enter 32 commands, the process will finish automatically.

Note

•Once you have taught a new macro commands, the original macro will no longer work. If you retrieve it, you will have to taught again.

Running Macros

Press MY MOVIE, MY TV, or MY MUSIC.

The commands in the macro are transmitted in the order in which they were programmed. Keep the remote controller pointed at the AV receiver until all of the commands have been transmitted.

Macros can be run at any time, regardless of the cur- rent remote controller mode.

En

81