Setup
Installation
Please read the following carefully when installing this unit.
Minimum Space Required
Do not use a cover that may enclose this unit or block the air inlets/vent holes. Allow sufficient space around this unit. When this unit is enclosed in a space with dimensions as indicated below, ventilate accordingly so that the internal and external temperatures are the same.
When using one set of projector
300 mm | 300 mm |
600 mm | 600 mm |
600 mm
When using two sets of projectors side by side
300 mm | 300 mm |
640 mm
600 mm
1,300 mm
600 mm
When the projector is suspended | NOTE: |
|
300 mm and |
above |
●To prevent the projector from falling or toppling, it is recommended that the holder be fastened to the unit using bolts.
●To mount the projector to the ceiling, mount a special shelf to the ceiling, followed by installing the unit on the shelf. For safety and maintenance purposes, equipment that eases adjustment to a suitable height for maintenance is required.
CAUTION:
●Special expertise and techniques are required for mounting this unit. Be sure to ask your dealer or a specialist to perform mounting.
11