JVC DLA-SH4K Connection Using a LAN Cable, Configuring the Network Settings, Connection Example

Page 20

Launch the web browser on the computer

Remove the lens cap

Insert plug into the power outlet on the wall

3

4

5 Turn on the main power of the projector to set to [I]

5

(Supplied)

Power Cord

3

Setup

Connection Using a LAN Cable

You can control this projector using a computer by connecting the projector and computer to the network (LAN).

Connection Example

Router

(DHCP

LAN

WAN

To LAN

Terminal

5 and above) LAN cables.

of PC for this Projector

Windows XP Professional SP2

Windows XP Home Edition SP2

Pentium3 1 GHz or higher

256 MB and above

●Make use of Internet Explorer Ver. 6.0.

●Windows is either registered trademark or trademark of Microsoft Corporation in the United States and/or other countries.

CAUTION:

●The PC specifications above are reference values for the application software to run smoothly, and are not intended to guarantee their operation.

Note that the applications may not run smoothly depending on the condition of use of the respective users even when the system requirements are satisfied.

Configuring the Network Settings

This sections describes the procedures when the IP address is automatically assigned by the DHCP server.

1 Check to ensure that this projector is connected to the DHCP server via a LAN cable

2 Connect the supplied power cord to the

power input terminal of this projector

2

●The [STANDBY/ON], [LAMP], and [WARNING] indicators light up for about 45 seconds, after which the [STANDBY/ON] indicator turns red.

6

20

Image 20

Contents For Customer use Thank you for purchasing this JVC productMachine Noise Information Germany only Safety PrecautionsAbout the installation place Do not allow any unqualified person to install the unit Safety Precautions Cont’d Power cordDo not cut off the main plug from this equipment NeutralEMC Supplement Contents Check the Accessories/ Optional AccessoriesFeatures How to Read this ManualHigh flexible installation User-friendly interface and high operabilityPrecautions During Use Maintenance ProceduresBurning-in of D-ILA Device Viewing Conditions Brightness of RoomNames and Functions of Parts Front/Right SideNames and Functions of Parts Cont’d RearInstallation When using one set of projector When using two sets of projectors side by side When the projector is suspendedInstalling the Projector and Screen Installation Cont’dProjector Installation When shift amount in the right direction is +25 % When shift amount in the left/right direction is 0 % When shift amount in the left direction is -25 % When light passes through the glass of projection boothInstalling the Projector and Screen Cont’d Projecting images by arranging projectors side by sideScreen Size and Projection Distance Approx .03 mApprox .29 m Approx.3.81 m Possible Input Signals and Projected Image Connecting Video Signals of the ComputerConnection During Single-Screen Mode Display Connection During Single-Screen Mode Display Connecting Video Signals Computer Cont’d Connection During Two-Screen/Four Screen Mode DisplayOutput Status NormalConnection Example During Four-Screen Mode Connection During Two-Screen/Four-Screen Mode DisplayConnection Example During Two-Screen Mode Connection Using a LAN Cable Configuring the Network SettingsConnection Example PC for this ProjectorUsing the Mail Delivery Feature Enter ArootB in Login NameClick Aloginb Login screen for this projector appearsProjecting Image Useful Features During Projection Settings Menu Main MenuSetting Value Description Power Latest ErrorSignal Status TemperatureSetting Menu Cont’d Image MenuDisplay Mode Setting MenuSetting Value Description Input Level Image Green color value is fixed Setting Value Description RedConvergence Menu This menu is used for adjusting the projection lens Lens MenuFocus ShiftOption Menu Network Menu Error message sent from this projector Mail MenuSetting Value Description Mail Setting PasswordMail AddressRS-232C Interface Communication SpecificationsCommand Format ON/OFF External control command table Parameters used for the data format Maintenance Cleaning and Replacing the FilterReplacement of Light Source Lamp Routine ServicingTroubleshooting Mode display When Projection has EndedImage is Unusually darkWhat to do when these messages are displayed Message Cause DetailsLamp Time Over Out of RangeIndicators Measures when the warning mode appearsIndicator Description Check MeasureLatest Error Specifications Specifications Cont’d RS-232C Terminal Pin No Signal Operation Signal DirectionDVI-D Terminal Pin No Signal Pin AssignmentDimensional Outline Drawing Top Side Front RearOthers Page DLA-SH4K Projector