JVC DLA-SH4K What to do when these messages are displayed, Message Cause Details, Lamp Time Over

Page 40

Others

What to do when these messages are displayed

Messages are displayed when the lamp life has expired and when there is input of signals that cannot be used.

Message

Lamp Time Over

Message

Cause (Details)

 

 

 

Displayed when the lamp time has exceeded 1500 hours.

 

The message is displayed for a period of 3 minutes during each

Lamp Time Over

projection.

N Replace with a new lamp unit.

 

 

For details on replacement of the lamp unit, please consult your

 

authorized dealer.

 

 

 

When there is input of video signals that cannot be used with this

Out of Range

unit

 

N Input video signals that can be used.

 

 

 

When no device is connected to the input terminal

No Input

When the input terminal is connected but there is no signal

 

N Input the video signals.

 

 

40

Image 40
Contents For Customer use Thank you for purchasing this JVC productAbout the installation place Safety PrecautionsMachine Noise Information Germany only Do not allow any unqualified person to install the unit Safety Precautions Cont’d Power cordDo not cut off the main plug from this equipment NeutralEMC Supplement Contents Check the Accessories/ Optional AccessoriesFeatures How to Read this ManualHigh flexible installation User-friendly interface and high operabilityPrecautions During Use Maintenance ProceduresBurning-in of D-ILA Device Viewing Conditions Brightness of RoomNames and Functions of Parts Front/Right SideNames and Functions of Parts Cont’d RearInstallation  When using one set of projector When using two sets of projectors side by side  When the projector is suspendedProjector Installation Installation Cont’dInstalling the Projector and Screen  When shift amount in the right direction is +25 %  When shift amount in the left/right direction is 0 % When shift amount in the left direction is -25 %  When light passes through the glass of projection boothInstalling the Projector and Screen Cont’d Projecting images by arranging projectors side by sideScreen Size and Projection Distance Approx .03 mApprox .29 m Approx.3.81 mConnection During Single-Screen Mode Display Connecting Video Signals of the Computer Possible Input Signals and Projected Image  Connection During Single-Screen Mode Display Connecting Video Signals Computer Cont’d Connection During Two-Screen/Four Screen Mode DisplayOutput Status NormalConnection Example During Two-Screen Mode  Connection During Two-Screen/Four-Screen Mode DisplayConnection Example During Four-Screen Mode Connection Using a LAN Cable Configuring the Network SettingsConnection Example PC for this ProjectorUsing the Mail Delivery Feature Enter ArootB in Login NameClick Aloginb Login screen for this projector appearsProjecting Image Useful Features During Projection Settings Menu Main MenuSetting Value Description Power Latest ErrorSignal Status TemperatureSetting Menu Cont’d Image MenuSetting Value Description Input Level Setting MenuDisplay Mode Convergence Menu Setting Value Description RedImage Green color value is fixed This menu is used for adjusting the projection lens Lens MenuFocus ShiftOption Menu Network Menu  Error message sent from this projector Mail MenuSetting Value Description Mail Setting PasswordMail AddressCommand Format Communication SpecificationsRS-232C Interface  Parameters used for the data format  External control command tableON/OFF Maintenance Cleaning and Replacing the FilterReplacement of Light Source Lamp Routine ServicingTroubleshooting Mode display When Projection has EndedImage is Unusually darkWhat to do when these messages are displayed Message Cause DetailsLamp Time Over Out of RangeIndicators  Measures when the warning mode appearsIndicator Description Check MeasureLatest Error Specifications Specifications Cont’d RS-232C Terminal Pin No Signal Operation Signal DirectionDVI-D Terminal Pin No Signal  Pin AssignmentDimensional Outline Drawing  Top Side  Front  RearOthers Page DLA-SH4K Projector