JVC DLA-SH4K instruction manual Features, How to Read this Manual, High flexible installation

Page 7

Features

Ultra-high resolution, high contrast, and high quality projector

Ultra-high resolution of 40962400

This projector comes with a newly developed 1.27" and 40962400 pixel D-ILA (Direct-drive Image Light Amplifier) device, and achieves an ultra-high resolution of 9.83 million pixels, which is four times that of full HD.

High contract ratio of 10,000:1

A high contrast ratio of 10,000:1 (native) is achieved through combining the D-ILA device with WireGrid (inorganic reflective polarizing plate) that is employed in the new optical engine.

High flexible installation

Design is compact and light, and enables stacking

This product is about 65 % the size of existing JVC projectors of the same class, and its weight is as light as 55 kg (excluding lens).

Stackable design enhances installation for special applications (e.g. 3D).

Vertical/Horizontal lens shift

This projector enables not only vertical (±50 %), but also horizontal (±25 %) lens shift, which enables a larger degree of flexibility in the layout.

Inclined installation

This product can be installed at a tilt angle of up to ±90°, which provides greater flexibility in the location of the projection screen.

Low power consumption

This product helps to save power with a consumption of not more than 1.5 kW.

User-friendly interface and high operability

Equipped with DVI (Dual-Link)4 input terminals

Network-supported

In addition to the conventional RS-232C, it also provide support for connection using Ethernet.

You can make adjustments or configure settings from the web browser on the PC without having to install any special software.

Network connection enables you to make perform adjustment or configure settings for multiple projectors using a single PC.

The Email feature enables you to send reports on the lamp replacement timing or error messages to a remote location.

Comes with various built-in test patterns (six types including Cross Hatch, Color Bars, etc.)

Enables image adjustment without the need of external signal sources.

Features that enable flexible display and expression

Supports multi screens (single screen, two- screen, and four-screen modes)

Comes with three types of built-in gamma tables. Enables configuration of gradation expression settings according to the video image

How to Read this Manual

How to Read this Manual

Symbols used in this manual

CAUTION

: Describes precautions to note when

 

operating this product.

NOTE

: Describes reference information, such

 

as functions and restrictions during use.

A

: Indicates the page or section to refer to.

Content of this manual

Personal computers or computers are expressed as computers or PCs in this manual.

Contents of this manual are the copyright of JVC. All rights reserved. Unauthorized reproduction and duplication of this manual, in whole or in part, without the permission of JVC is strictly prohibited.

The names of other companies’ products that appear in this manual are the trademark or registered trademark of the respective companies. Symbols such as ™, , and  are omitted in this manual.

Designs, specifications, and other details described in this manual may be modified for improvement without prior notice.

7

Image 7
Contents Thank you for purchasing this JVC product For Customer useAbout the installation place Safety PrecautionsMachine Noise Information Germany only Do not allow any unqualified person to install the unit Neutral Safety Precautions Cont’dPower cord Do not cut off the main plug from this equipmentEMC Supplement Check the Accessories/ Optional Accessories ContentsUser-friendly interface and high operability FeaturesHow to Read this Manual High flexible installationViewing Conditions Brightness of Room Precautions During UseMaintenance Procedures Burning-in of D-ILA DeviceFront/Right Side Names and Functions of PartsRear Names and Functions of Parts Cont’d When the projector is suspended Installation When using one set of projector  When using two sets of projectors side by sideProjector Installation Installation Cont’dInstalling the Projector and Screen  When light passes through the glass of projection booth  When shift amount in the right direction is +25 % When shift amount in the left/right direction is 0 %  When shift amount in the left direction is -25 %Projecting images by arranging projectors side by side Installing the Projector and Screen Cont’dApprox.3.81 m Screen Size and Projection DistanceApprox .03 m Approx .29 mConnection During Single-Screen Mode Display Connecting Video Signals of the Computer Possible Input Signals and Projected Image  Connection During Single-Screen Mode Display Normal Connecting Video Signals Computer Cont’dConnection During Two-Screen/Four Screen Mode Display Output StatusConnection Example During Two-Screen Mode  Connection During Two-Screen/Four-Screen Mode DisplayConnection Example During Four-Screen Mode PC for this Projector Connection Using a LAN CableConfiguring the Network Settings Connection ExampleLogin screen for this projector appears Using the Mail Delivery FeatureEnter ArootB in Login Name Click AloginbProjecting Image Useful Features During Projection Main Menu Settings MenuTemperature Setting Value Description PowerLatest Error Signal StatusImage Menu Setting Menu Cont’dSetting Value Description Input Level Setting MenuDisplay Mode Convergence Menu Setting Value Description RedImage Green color value is fixed Shift This menu is used for adjusting the projection lensLens Menu FocusOption Menu Network Menu Mail Menu  Error message sent from this projectorAddress Setting Value Description Mail SettingPassword MailCommand Format Communication SpecificationsRS-232C Interface  Parameters used for the data format  External control command tableON/OFF Cleaning and Replacing the Filter MaintenanceRoutine Servicing Replacement of Light Source LampTroubleshooting Unusually dark Mode displayWhen Projection has Ended Image isOut of Range What to do when these messages are displayedMessage Cause Details Lamp Time OverCheck Measure Indicators Measures when the warning mode appears Indicator DescriptionLatest Error Specifications  Pin Assignment Specifications Cont’dRS-232C Terminal Pin No Signal Operation Signal Direction DVI-D Terminal Pin No Signal Front  Rear Dimensional Outline Drawing Top  SideOthers Page DLA-SH4K Projector