JVC DLA-SH4K instruction manual EMC Supplement

Page 5

EMC Supplement

-This equipment is in conformity with the provisions and protection requirements of the corresponding European Directives. This equipment is designed for professional projector appliances and can be used in the following environments.

Controlled EMC environment (for example purpose built broadcasting or recording studio), and the rural outdoors environment (far away from railways, transmitters, overhead power lines, etc).

In order to keep the best performance and furthermore for electromagnetic compatibility we recommend to use the cables not exceeding the following length:

Cables

 

Length

Power cord

Power supply cord

3.3 m

DVI (X4) Cable

Shielded cable

5.0 m

USB Cable

Shielded cable

2.0 m

LAN Cable

Shielded cable

2.0 m

RS-232C Cable

Shielded cable

1.6 m

The inrush current of this apparatus is 9.705 amperes.

WARNING

This is a Class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures. In case where the strong electromagnetic waves or magnetism are near the signal cable, the picture will contain noise. In such cases, please keep the cable away from the sources of the disturbance.

Dear Customer,

This apparatus is in conformance with the valid European directives and standards regarding electromagnetic compatibility and electrical safety.

European representative of Victor Company of Japan, Limited is: JVC Technology Centre Europe GmbH

Company name changed in:

JVC Technical Services Europe GmbH Postfach 10 05 52

61145 Friedberg Germany

5

Image 5
Contents Thank you for purchasing this JVC product For Customer useMachine Noise Information Germany only Safety PrecautionsAbout the installation place Do not allow any unqualified person to install the unit Power cord Safety Precautions Cont’dDo not cut off the main plug from this equipment NeutralEMC Supplement Check the Accessories/ Optional Accessories ContentsHow to Read this Manual FeaturesHigh flexible installation User-friendly interface and high operabilityMaintenance Procedures Precautions During UseBurning-in of D-ILA Device Viewing Conditions Brightness of RoomFront/Right Side Names and Functions of PartsRear Names and Functions of Parts Cont’d When using one set of projector Installation When using two sets of projectors side by side  When the projector is suspendedInstalling the Projector and Screen Installation Cont’dProjector Installation  When shift amount in the left/right direction is 0 %  When shift amount in the right direction is +25 % When shift amount in the left direction is -25 %  When light passes through the glass of projection boothProjecting images by arranging projectors side by side Installing the Projector and Screen Cont’dApprox .03 m Screen Size and Projection DistanceApprox .29 m Approx.3.81 m Possible Input Signals and Projected Image Connecting Video Signals of the ComputerConnection During Single-Screen Mode Display  Connection During Single-Screen Mode Display Connection During Two-Screen/Four Screen Mode Display Connecting Video Signals Computer Cont’dOutput Status NormalConnection Example During Four-Screen Mode  Connection During Two-Screen/Four-Screen Mode DisplayConnection Example During Two-Screen Mode Configuring the Network Settings Connection Using a LAN CableConnection Example PC for this ProjectorEnter ArootB in Login Name Using the Mail Delivery FeatureClick Aloginb Login screen for this projector appearsProjecting Image Useful Features During Projection Main Menu Settings MenuLatest Error Setting Value Description PowerSignal Status TemperatureImage Menu Setting Menu Cont’dDisplay Mode Setting MenuSetting Value Description Input Level Image Green color value is fixed Setting Value Description RedConvergence Menu Lens Menu This menu is used for adjusting the projection lensFocus ShiftOption Menu Network Menu Mail Menu  Error message sent from this projectorPassword Setting Value Description Mail SettingMail AddressRS-232C Interface Communication SpecificationsCommand Format ON/OFF  External control command table Parameters used for the data format Cleaning and Replacing the Filter MaintenanceRoutine Servicing Replacement of Light Source LampTroubleshooting When Projection has Ended Mode displayImage is Unusually darkMessage Cause Details What to do when these messages are displayedLamp Time Over Out of Range Measures when the warning mode appears IndicatorsIndicator Description Check MeasureLatest Error Specifications RS-232C Terminal Pin No Signal Operation Signal Direction Specifications Cont’dDVI-D Terminal Pin No Signal  Pin Assignment Top Dimensional Outline Drawing Side  Front  RearOthers Page DLA-SH4K Projector