McIntosh MDLP1 owner manual Projector and 43 Screen Mounting Location

Page 12

Projector and 4:3 Screen Mounting Location

The illustrations below together with the charts on the adjacent page, will help to assure the correct mounting locations for both the projector and the screen.

Projector mounted from the ceiling

Ceiling

Top of Screen

 

 

Acceptable

 

 

Projector

 

 

Mounting

 

 

Height

Vertical

 

 

Screen

 

 

Height

 

Vertical Center of Screen

 

 

 

 

CAUTION:

 

 

The MDLP1 Video Projector

 

 

weight is 40 pounds (18.14 ki-

 

 

lograms). When mounting the

 

 

projector to a building struc-

 

 

ture it is important to follow

Bottom of Screen

 

all of the local building/con-

Distance (Minimum-Maximum) between

stuction codes. Not evaluated

 

the Screen and the Projector Lens

for Wall or Ceiling Mounting.

Top of Screen

Vertical

Screen

Height

Projector placed above the floor

Distance (Minimum-Maximum) between the Screen and the Projector Lens

Vertical Center of Screen

Acceptable

Projector

Mounting

Height

Bottom of Screen

Floor

12

Image 12
Contents Video Projector Important Safety Instructions Additional Safety Instructions Safety InstructionsCustomer Service Table of ContentsThank You Please Take a MomentGeneral Information Connector and Cable Information Power Control ConnectorsData Port Connectors RS232 DB9 Connector Pin LayoutPerformance Features Dimensions Installation Installation Overview VentilationProjector and 169 Screen Mounting Location Projector mounted from the ceilingProjector placed above the floor Installation, con’t Projector and 43 Screen Mounting Location Installation, con’t Initial Setup Screen Rear Panel Connections and Switch How to Connect the MDLP1 Power Control ConnectionsAC Power Cord Connections Data Control ConnectionsRemote Control Push-Buttons How to use the Remote Control Front Panel Push-buttons, Indicators and Control Default Settings Menu Function SettingHow to Operate the MDLP1 PowerImage Adjustments and Setting changes Source SelectionKeystone0 Picture Mode Selection Picture Adjust MenuHow to Operate the MDLP1, con’t Aspect Ratio OptionsFine Menu 1 Adjust Fine Menu 2 AdjustInput Signal Resolution Selection RGB/HD Adjust Display Menu AdjustOSD/Blanking Config. Settings Lamp at this time, a Specifications Optical Specifications Electrical SpecificationsGeneral Specifications Packing Instructions McIntosh Laboratory, Inc Chambers Street Binghamton, NY