McIntosh MDLP1 owner manual Rear Panel Connections and Switch

Rear Panel Connections and Switch

DATA IN Port receives signals from McIntosh A/V Control Center for Remote Control Operation

TRIGGER 1 Output sends a Turn-On signal to other components when the MDLP1 is switched On

COMPONENT INPUTS receive Com- ponent Video (Y, PR and PB) Signals from Component Video Sources

POWER CONTROL IN receives turn-on signals from a McIntosh compo- nent and POWER CON- TROL OUT sends turn-on signals on to another McIntosh Component

TRIGGER 2 Output sends Turn-On signals to other com- ponents and may be assigned to activate when a specific as- pect ratio is selected.

RS232 connector for connection to a com- puter or other control device

Switches Off	IR INput for
the illumina-	connecting an
tion to the Top	IR Receiver
Control Panel
McIntosh Logo

Connect the MDLP1 power cord to a live AC outlet. Refer to informa- tion on the back panel to determine the correct voltage

HDMI Inputs receive digital video signals from a McIntosh A/V Control Center and/or other source compo- nents

16