Onkyo HT-S7300 Which Connections Should I Use?, Video Connection Formats, Tor, Signal Selection

TV, projector, etc.

Signal Selection Example

Blu-ray Disc/DVD player, etc.

Video Signal Flow Chart

Blu-ray Disc/DVD player, etc.

Which Connections Should I Use?

The AV receiver supports several connection formats for compatibility with a wide range of AV equipment. The format you choose will depend on the formats supported by your components. Use the following sections as a guide.

The on-screen setup menus appear only on a TV that is connected to the HDMI OUT. If your TV is connected to the MONITOR OUT V or the COMPONENT VIDEO OUT, use the AV receiver’s display when changing settings.

Video Connection Formats

Video component can be connected by using any one of the following video connection formats: composite video, com- ponent video, or HDMI, the latter offering the best picture quality.

Video input signals flow through the AV receiver as shown, with composite video and component video sources all being upconverted for the HDMI output.

The composite video and component video outputs pass

through their respective input signals as they are.	Composite	Component	HDMI
When you connect audio component to an HDMI or COM-		IN
PONENT input, you must assign that input to an input selec-	AV receiver
tor (➔ 39).
		MONITOR OUT
	Composite	Component	HDMI

■Signal Selection

If signals are present at more than one input, the inputs will be selected automatically in the following order of priority: HDMI, component video, composite video.

However, for component video only, regardless of whether a component video signal is actually present, if a component video input is assigned to the input selector, that component video input will be selected. And if no component video input is assigned to the input selector, this will be interpreted as no component video signal being present.

In the Signal Selection Example shown on the right, video signals are present at both the HDMI and composite video inputs, however, the HDMI signal is automatically selected as the source and video is output by the HDMI outputs.

Composite	Component	HDMI
	IN
AV receiver
	MONITOR OUT
Composite	Component	HDMI

TV, projector, etc.

Audio Connection Formats

Audio component can be connected by using any of the following audio connection formats: analog, optical, coax- ial, or HDMI.

When choosing a connection format, bear in mind that the AV receiver does not convert digital input signals for ana- log line outputs and vice versa. For example, audio signals connected to an optical or coaxial digital input are not out- put by the analog VCR/DVR OUT.

If signals are present at more than one input, the inputs will be selected automatically in the following order of pri- ority: HDMI, digital, analog.

			Audio Signal Flow Chart
		Blu-ray Disc/DVD player, etc.
	Analog		Optical	Coaxial	HDMI
			IN
AV receiver	*1		*1	*1
			OUT
	Analog				HDMI
					*1	*2

TV, projector, etc.

*1 Depends on the “Audio TV Out” setting (➔ 49).

*2 This setting is available, when “Audio Return Channel” setting is set to “Auto” (➔ 49), you must select the TV/CD input selector and your TV must support ARC function.

En

23