Onkyo HT-S7300 instruction manual Lock Setup, Using the Audio Settings, Tone Control Settings

Page 50

Note

The “Power Control” setting can be set only when the “HDMI Control (RIHD)” setting is set to “On”.

HDMI power control only works with p-compatible components that support it and may not work properly with some components due to their settings or compatibility.

When set to “On”, power consumption will increase.

When set to “On”, regardless of whether the AV receiver is On or in Standby, both audio and video stream from an HDMI input will be output to the TV or other components via HDMI connec- tion (HDMI pass through function). When the HDMI pass through function activates in standby mode, HDMI THRU indi- cator will light.

The power consumption during standby mode will increase dur- ing the HDMI pass through function; however if your TV sup- ports CEC (Consumer Electronics Control), the power consumption can be saved in the following cases:

1.The TV is in standby mode.

2.You are watching a TV program.

Refer to the connected component’s instruction manual for details.

TV Control

`Off:

TV Control disabled.

`On:

TV Control enabled.

Set to “On” when you want to control the AV receiver from an p-compatible TV that is connected to HDMI.

Note

Do not assign the component connected with the HDMI input to the TV/CD selector when you set TV Control” setting to “On”. Otherwise, appropriate CEC (Consumer Electronics Control) operation is not guaranteed.

Set to “Off” when the TV is not compatible or when it is unclear whether the TV is compatible or not.

The “TV Control” setting can be set only when the “HDMI Control (RIHD)” (49) and “Power Control” (49) set- tings are both set to “On”.

Refer to the connected component’s instruction manual for details.

After changing the settings of the HDMI Control

(RIHD), Audio Return Channel, Power Control,

or TV Control, turn off the power to all connected pieces of equipment and then turn them on again. Refer to the user’s manuals for all connected pieces of equip- ment.

Lock Setup

With this preference, you can protect your settings by locking the setup menus.

Main menu

Lock Setup

Setup

`Locked:

Setup menus locked.

`Unlocked:

Setup menus not locked.

When the setup menus are locked, you cannot change any setting.

Using the Audio Settings

You can change various audio settings by pressing AUDIO (26).

 

 

1

Press RECEIVER followed by AUDIO.

2

Useq/wto select “Audio”, and then use q/w/e/r

 

to make the desired selection.

 

 

Note

These settings are disabled when:

a pair of headphones is connected, or

the “Audio TV Out” setting is set to “On” ( 49) and an input selector other than HDMI is selected.

Tone Control Settings

You can adjust the bass and treble for the front speakers, except when the Direct listening mode is selected.

Bass

`–10dBto 0dB to +10dB in 2 dB steps.

You can boost or cut low-frequency sounds.

Treble

`–10dBto 0dB to +10dB in 2 dB steps.

You can boost or cut high-frequency sounds.

Operating on the AV receiver

 

 

1

Press TONE on the AV receiver repeatedly to

 

select either “Bass” or “Treble”.

2

Use TONE LEVEL +/on the AV receiver to

 

adjust.

 

 

En

50

Image 50
Contents HT-S7300 Board above the apparatus shall be set 10 cm Always consider the environmental issues and follow10 cm 4 at the rear. The rear edge of the shelf or Away from the rear panel or wall, creating a flue-likePrecautions Speaker Precautions Package ContentsContents Features SKF-680 L/R 2-Way Front Speakers SKW-770 Bass Reflex Powered SubwooferSKW-780 Bass Reflex Powered Subwoofer SKC-680 2-Way Center SpeakerFront & Rear Panels Hdmi Thru indicatorTUNING, Preset 30 to 31, arrow Front PanelRear Panel UREMOTE Control jackDisplay Surr Back or Front HighFront, Center, Surround and Surround Back Speakers Speaker PackageSubwoofer SKW-770/780 Speaker terminals HTP-780 SKF-780, SKC-780, SKR-780, SKB-780Keyhole slots SKF-780 SKC-780Return button Remote ControllerControlling the AV Receiver Controlling the tunerAbout Home Theater Enjoying Home TheaterWall Mounting Connecting the AV ReceiverAttaching the Speaker Bases Front, Surround and Surround Back SpeakersSKC-780 Using the Stoppers for a More Stable PlatformUsing the Floor Pads for Subwoofer SKF-680, SKR-680, SKB-680, SKC-680Speaker Connection Precautions Connecting Your SpeakersSpeaker Configuration Number of speakersTo 5/812 to 15 mm Connecting the Speaker CablesScrew-type speaker terminals Strip 1/2 to 5/8 12 to 15 mm AV Cables and Jacks About AV ConnectionsConnected image with AV components Hdmi cableAudio return channel ARC function Connecting Your Components with HdmiJack Signal Components Assignable Front Rear Connecting Your ComponentsHow to record the video Remote Control Connecting Onkyo uComponentsSystem On/Auto Power On StepConnecting Antenna Video Connection Formats Signal SelectionWhich Connections Should I Use? Audio Connection FormatsTurning Off Turning On/Off the AV ReceiverTurning On Playing the Connected Component Selecting the Language Used for the Onscreen Setup MenusBasic Operations Displaying Source InformationUsing the Sleep Timer Using the Music OptimizerSetting the Display Brightness Using the Audio and Video MenusUsing Headphones Changing the Input DisplayEnter Audyssey 2EQ Room Correction Speaker SetupUsing Audyssey 2EQ Using a Powered Subwoofer Error MessagesChanging the Speaker Settings Manually Listening to the Radio Using the TunerTuning into Radio Stations Listening to the RadioDeleting Presets Presetting FM/AM StationsSelecting Presets ModeRecording AV RecordingSelecting Listening Modes Using the Listening ModesListening Mode Buttons Input Source About Listening ModesExplanatory Notes Speaker LayoutListening Modes Dolby TrueHD Resolution AudioDolby Digital Plus *5 DTS-HD HighOnkyo-Original DSP Listening Modes UnpluggedCommon Procedures in Setup Menu Advanced SetupOn-screen Setup Menus MenuHdmi Input Input/Output AssignMonitor Out BD/DVD, VCR/DVR, CBL/SAT, GAME, AUX, TV/CD, PortDigital Audio Input Speaker SettingsComponent Video Input Speaker Terminal Assign Front High/Zone2Speaker Distance Level Calibration Audio AdjustEqualizer Settings Multiplex/MonoTheater-Dimensional Audyssey Source SetupDynamic Volume Dynamic EQName Edit IntelliVolumeSync Picture Adjust Listening Mode Preset DTS/DTS-ES/DTS-HDOSD Setup Miscellaneous Hardware SetupVolume Setup Remote IDLip Sync Power ControlAudio TV Out Hdmi Control RihdTone Control Settings Lock SetupUsing the Audio Settings Music Optimizer Audyssey SettingsSpeaker Levels Late NightAudio Selector Setting the Incoming Digital Signal Fixed ModeAudio Selector Connecting Your Zone 2 Speakers to an Amp in Zone Connecting ZoneConnecting Your Zone 2 Speakers Directly to the AV receiver ZoneSetting the Powered Zone Using Zone Controlling Zone 2 from the AV receiverOperating with the remote controller Controlling Zone 2 with the Remote ControllerAdjusting the Volume for Zone Muting ZoneModels sold are different depending on the region Connecting an Onkyo DockControlling iPod Onkyo Dock CableUsing the Onkyo Dock UP-A1 DockWithout the RI Control Controlling Your iPodRI Dock With the RI ControlAvailable buttons Controlling Other Components Preprogrammed Remote Control CodesLooking up for Remote Control Code Remote Mode BD/DVD Entering Remote Control CodesRemote Control Codes for Onkyo Components Connected via u TV/CDYou can reset the remote controller to its default settings Resetting Remote Mode ButtonsResetting the Remote Controller Controlling Other ComponentsTV VOL q/w Components ButtonsCassettetape deck CH + Disc +Can’t turn on the AV receiver TroubleshootingStandby indicator flashes red There’s no sound, or it’s very quietOnly the front speakers produce sound There’s no sound with a certain signal formatAbout DTS signals Only the center speaker produces soundThere’s no picture from a source connected to an Hdmi Remote controller doesn’t workThere’s no picture On-screen menus don’t appearThere’s no sound AV receiver’s remote controller doesn’t control your iPodSound changes when I connect my headphones Can’t recordCBL/SAT, GAME, or AUX input Video Attoff defaultVideo Attenuation Important Note Regarding Video PlaybackSpecifications AV receiverFront Speaker SKF-680 Powered Subwoofer SKW-7701ch Home Theater Speaker Package HTP-680 Center Speaker SKC-6801ch Home Theater Speaker Package HTP-780 Dock for iPod UP-A1About Copyright Protection About HdmiSupported Audio Formats Operations that can be performed with p connection Using an RIHD-compatible TV, Player, or RecorderAbout p-compatible components Confirm the settings How to connect and setupConfirm the connecting and setting Operate with the remote controllerOutput Video Resolution ChartOutput Component Composite Input 1080p 1080i 720p 480p 480iOnkyo Europe Electronics GmbH Onkyo Europe Electronics GmbH UK Branch