Component Video Input, Digital Audio Input

Component Video Input

If you connect a video component to a component video input, you must assign that input to an input selector. For example, if you connect your Blu-ray Disc/DVD player to COMPONENT VIDEO IN 2, you must assign “IN2” to the “BD/DVD” input selector.

Here are the default assignments.

Input selector	Default assignment

BD/DVD	IN1

VCR/DVR	- - - - -

CBL/SAT	IN2

GAME	- - - - -

AUX	- - - - -

TUNER	- - - - - (Fixed)

TV/CD	- - - - -

PORT	- - - - -

■BD/DVD, VCR/DVR, CBL/SAT, GAME, AUX, TV/CD, PORT

`IN1, IN2:

Select a corresponding component video input that the video component has been connected.

`- - - - -:

Select if you are using HDMI output, not component video output, to output composite video and compo- nent video sources.

Note

•If you connect a component (such as UP-A1 Dock that seated iPod) to the UNIVERSAL PORT jack, you cannot assign any input to “PORT” selector.

Digital Audio Input

If you connect a component to a digital audio input, you must assign that input to an input selector. For example, if you connect your CD player to the OPTICAL IN 1, you must assign “OPT1” to the “TV/CD” input selector. Here are the default assignments.

Input selector	Default assignment
BD/DVD	COAX1

VCR/DVR	- - - - -

CBL/SAT	COAX2

GAME	OPT1

AUX	- - - - -

TUNER	- - - - - (Fixed)

TV/CD	OPT2

PORT	- - - - -

■BD/DVD, VCR/DVR, CBL/SAT, GAME, AUX, TV/CD, PORT

`COAX1, COAX2, OPT1, OPT2:

Select a corresponding digital audio input that the component has been connected.

`- - - - -:

Select if the component is connected to an analog audio input.

Note

•When an HDMI IN is assigned to an input selector in

“HDMI Input” (➔ 39), the same HDMI IN will be set as a prior- ity in this assignment. In this case, if you want to use the coaxial or optical audio input, make the selection in the Audio Selector in the Audio menu.

•Available sampling rate for PCM signals from a digital input (optical and coaxial) is 32/44.1/48/88.2/96 kHz/16, 20, 24 bit.

•If you connect a component (such as UP-A1 Dock that seated iPod) to the UNIVERSAL PORT jack, you cannot assign any input to “PORT” selector.

Speaker Setup

Main menu

Speaker Setup

Some of the settings in this section are set automatically by Audyssey 2EQ® Room Correction and Speaker Setup function (➔ 28).

Here you can check the settings made by Audyssey 2EQ Room Correction and Speaker Setup function, or set them manually, which is useful if you change one of the con- nected speakers after using Audyssey 2EQ Room Correc- tion and Speaker Setup function.

Note

•These settings are disabled when:

–a pair of headphones is connected, or

–the “Audio TV Out” setting is set to “On” ( ➔ 49) and an input selector other than HDMI is selected.

Speaker Settings

If you change these settings, you must run Audyssey 2EQ Room Correction and Speaker Setup again (➔ 28).

■Speaker Terminal Assign Front High/Zone2

With this setting, you can specify the speakers con- nected to FRONT HIGH OR ZONE 2 SPEAKERS terminals.

`Front High:

Front high speakers can be used.

`Zone2:

Zone 2 speakers can be used (Powered Zone 2 enabled).

SurrBack/Front High

With this setting, you can specify the speakers con- nected to SURR BACK OR FRONT HIGH SPEAK- ERS terminals.

`Surr Back:

Surround back speakers can be used.

`Front High:

Front high speakers can be used.

Note

•If “Front High” is selected in the “Front High/Zone2” setting, you cannot select “Front High” here.