Onkyo HT-S7300 Using the Music Optimizer, Setting the Display Brightness, Muting the AV Receiver

Page 26

Using the Music Optimizer

The Music Optimizer function enhances the sound quality of compressed music files.

Press MUSIC OPTIMIZER on the front panel.

The M.Opt indicator lights on the display.

Tip

Alternatively, you can use the remote controller’s AUDIO and arrow buttons.

See “Music Optimizer” for more details (51).

Setting the Display Brightness

You can adjust the brightness of the AV receiver’s display.

Press RECEIVER followed by DIMMER repeat- edly to select: dim, dimmer, or normal brightness.

Tip

• Alternatively, you can use the AV receiver’s DIMMER.

Muting the AV Receiver

You can temporarily mute the output of the AV receiver.

Press RECEIVER followed by MUTING.

The output is muted and the MUTING indicator flashes on the display.

Tip

To unmute, press MUTING again or adjust the volume.

The Mute function is cancelled when the AV receiver is set to Standby.

Using the Sleep Timer

With the sleep timer, you can set the AV receiver to turn off automatically after a specified period.

Press RECEIVER followed by SLEEP repeatedly to select the required sleep time.

The sleep time can be set from 90 to 10 minutes in 10 minute steps.

The SLEEP indicator lights on the display when the sleep timer has been set. The specified sleep time appears on the display for about 5 seconds, then the previous display reappears.

Tip

If you need to cancel the sleep timer, press SLEEP repeatedly until the SLEEP indicator goes off.

To check the time remaining until the AV receiver sleeps, press SLEEP. Note that if you press SLEEP while the sleep time is being displayed, you’ll shorten the sleep time by 10 minutes.

En

Selecting Speaker Layout

You can prioritize which speakers you want to use.

Press RECEIVER followed by SP LAYOUT

repeatedly.

`Speaker Layout:FH:

The sound from front high speakers is output by priority.

`Speaker Layout:SB:

The sound from surround back speakers is out- put by priority.

Note

If the Powered Zone 2 is being used (54), this setting cannot be selected.

When the listening mode that doesn’t support front high or sur- round back speakers is used, the setting cannot be selected.

Using the Audio and Video Menus

By pressing AUDIO or VIDEO, you can have a quick access to frequently used menus without having to go through the long standard menu. The menus enable you to change settings and view the current information.

1 Press RECEIVER followed by AUDIO or VIDEO. Either of the following screens will be superimposed on the TV screen.

BD/DVD

 

Audio

 

Bass

0dB

 

Video

 

Treble

 

Info

 

Subwoofer Level

 

 

Input Sel

 

Center Level

 

 

Listening Mode

 

Dynamic EQ

 

 

 

 

 

Dynamic Volume

 

 

 

 

 

 

 

 

 

BD/DVD

 

 

 

 

 

 

Audio

 

 

 

 

 

 

Wide Mode

 

 

 

Video

 

Picture Mode

 

Auto

 

Info

 

 

 

 

Input Sel

 

 

 

 

 

Listening Mode

 

 

 

 

 

 

 

 

 

 

 

26

Image 26
Contents HT-S7300 Board above the apparatus shall be set 10 cm Always consider the environmental issues and follow10 cm 4 at the rear. The rear edge of the shelf or Away from the rear panel or wall, creating a flue-likePrecautions Speaker Precautions Package ContentsContents Features SKF-680 L/R 2-Way Front Speakers SKW-770 Bass Reflex Powered SubwooferSKW-780 Bass Reflex Powered Subwoofer SKC-680 2-Way Center SpeakerFront & Rear Panels Hdmi Thru indicatorTUNING, Preset 30 to 31, arrow Front PanelRear Panel UREMOTE Control jackDisplay Surr Back or Front HighFront, Center, Surround and Surround Back Speakers Speaker PackageSubwoofer SKW-770/780 Speaker terminals HTP-780 SKF-780, SKC-780, SKR-780, SKB-780Keyhole slots SKF-780 SKC-780Return button Remote ControllerControlling the AV Receiver Controlling the tunerAbout Home Theater Enjoying Home TheaterWall Mounting Connecting the AV ReceiverAttaching the Speaker Bases Front, Surround and Surround Back SpeakersSKC-780 Using the Stoppers for a More Stable PlatformUsing the Floor Pads for Subwoofer SKF-680, SKR-680, SKB-680, SKC-680Speaker Connection Precautions Connecting Your SpeakersSpeaker Configuration Number of speakersTo 5/812 to 15 mm Connecting the Speaker CablesScrew-type speaker terminals Strip 1/2 to 5/8 12 to 15 mm AV Cables and Jacks About AV ConnectionsConnected image with AV components Hdmi cableAudio return channel ARC function Connecting Your Components with HdmiJack Signal Components Assignable Front Rear Connecting Your ComponentsHow to record the video Remote Control Connecting Onkyo uComponentsSystem On/Auto Power On StepConnecting Antenna Video Connection Formats Signal SelectionWhich Connections Should I Use? Audio Connection FormatsTurning Off Turning On/Off the AV ReceiverTurning On Playing the Connected Component Selecting the Language Used for the Onscreen Setup MenusBasic Operations Displaying Source InformationUsing the Sleep Timer Using the Music OptimizerSetting the Display Brightness Using the Audio and Video MenusUsing Headphones Changing the Input DisplayEnter Audyssey 2EQ Room Correction Speaker SetupUsing Audyssey 2EQ Using a Powered Subwoofer Error MessagesChanging the Speaker Settings Manually Listening to the Radio Using the TunerTuning into Radio Stations Listening to the RadioDeleting Presets Presetting FM/AM StationsSelecting Presets ModeRecording AV RecordingSelecting Listening Modes Using the Listening ModesListening Mode Buttons Input Source About Listening ModesExplanatory Notes Speaker LayoutListening Modes Dolby TrueHD Resolution AudioDolby Digital Plus *5 DTS-HD HighOnkyo-Original DSP Listening Modes UnpluggedCommon Procedures in Setup Menu Advanced SetupOn-screen Setup Menus MenuHdmi Input Input/Output AssignMonitor Out BD/DVD, VCR/DVR, CBL/SAT, GAME, AUX, TV/CD, PortDigital Audio Input Speaker SettingsComponent Video Input Speaker Terminal Assign Front High/Zone2Speaker Distance Level Calibration Audio AdjustEqualizer Settings Multiplex/MonoTheater-Dimensional Audyssey Source SetupDynamic Volume Dynamic EQName Edit IntelliVolumeSync Picture Adjust Listening Mode Preset DTS/DTS-ES/DTS-HDOSD Setup Miscellaneous Hardware SetupVolume Setup Remote IDLip Sync Power ControlAudio TV Out Hdmi Control RihdTone Control Settings Lock SetupUsing the Audio Settings Music Optimizer Audyssey SettingsSpeaker Levels Late NightAudio Selector Setting the Incoming Digital Signal Fixed ModeAudio Selector Connecting Your Zone 2 Speakers to an Amp in Zone Connecting ZoneConnecting Your Zone 2 Speakers Directly to the AV receiver ZoneSetting the Powered Zone Using Zone Controlling Zone 2 from the AV receiverOperating with the remote controller Controlling Zone 2 with the Remote ControllerAdjusting the Volume for Zone Muting ZoneModels sold are different depending on the region Connecting an Onkyo DockControlling iPod Onkyo Dock CableUsing the Onkyo Dock UP-A1 DockWithout the RI Control Controlling Your iPodRI Dock With the RI ControlAvailable buttons Controlling Other Components Preprogrammed Remote Control CodesLooking up for Remote Control Code Remote Mode BD/DVD Entering Remote Control CodesRemote Control Codes for Onkyo Components Connected via u TV/CDYou can reset the remote controller to its default settings Resetting Remote Mode ButtonsResetting the Remote Controller Controlling Other ComponentsTV VOL q/w Components ButtonsCassettetape deck CH + Disc +Can’t turn on the AV receiver TroubleshootingStandby indicator flashes red There’s no sound, or it’s very quietOnly the front speakers produce sound There’s no sound with a certain signal formatAbout DTS signals Only the center speaker produces soundThere’s no picture from a source connected to an Hdmi Remote controller doesn’t workThere’s no picture On-screen menus don’t appearThere’s no sound AV receiver’s remote controller doesn’t control your iPodSound changes when I connect my headphones Can’t recordCBL/SAT, GAME, or AUX input Video Attoff defaultVideo Attenuation Important Note Regarding Video PlaybackSpecifications AV receiverFront Speaker SKF-680 Powered Subwoofer SKW-7701ch Home Theater Speaker Package HTP-680 Center Speaker SKC-6801ch Home Theater Speaker Package HTP-780 Dock for iPod UP-A1About Copyright Protection About HdmiSupported Audio Formats Operations that can be performed with p connection Using an RIHD-compatible TV, Player, or RecorderAbout p-compatible components Confirm the settings How to connect and setupConfirm the connecting and setting Operate with the remote controllerOutput Video Resolution ChartOutput Component Composite Input 1080p 1080i 720p 480p 480iOnkyo Europe Electronics GmbH Onkyo Europe Electronics GmbH UK Branch