Elmo HV-C1000XG Installation of the Unit, Setting of Auto Focus Operating Range

Page 15

4 INSTALLATION

Installation of the Unit

For the ceiling mounting metal piece, VB-1000 separately available, any product approved by UL Standard for projector which is capable of supporting a load of 8-10 kg or more, or similar product also approved by UL Standard shall be used. Request your distributor to install this product on the ceiling. For details, refer to the HV-C1000XG Installation Manual included in the package.

Connect the power supply cord with the Power Cord

Receptacle of this product and plug outlet.

Turn ON the Power Supply Switch.

When this product is not used for a long time, turn OFF the Power Supply Switch or remove the power supply plug from the outlet.

Provide a distance of 1.3m or more between the unit and the document to be projected.Images can be focused when the distance increases; however, the light intensity may be insufficient.If the distance is more than 3m, external lighting is needed.

Setting of Auto Focus Operating Range

The following settings of this product can be changed with the DIP Switches. Change the settings according to the connection environment. The factory settings are as shown in the following table:

AF operating range (Shooting distance)			[C] key	[D] key
Whole area	(1.3m	)	0	0
1.3m	1.8m		1	0
1.7m	2.8m		0	1
2.7m			1	1

In delivery from plant, the whole area is set.

When changing the DIP Switch keys, be sure to turn OFF the power supply to this poduct beforehand.

1

2

3

4

5

6

7

8

9

10

11

14

Image 15

Contents HV-C1000XG Important Safeguards Should be moved with care. Quick Wash hands after handlingRisk Electric Shock Do not Open Exclamation point within Before YOU USE Contents Symptoms and Confirmation Uart Communication FormatReplacing the Lamp Appearance Part Names and FunctionsRS-232C Terminal RGB OUT ReceptacleAC Connector PanelAnalog RGB-out Power Cord To connect the mouse supplied accessory*1Wireless Remote Control Power Supply Switch To turn ON/OFF the power supplyName Function Reference Memory No. Used with 6 to To switch pause/motion of the imageButton Name Function Reference To double the image sizeWireless Remote Control Receivable RangePreparation Mouse Operation MouseInstallation Installation of the UnitSetting of Auto Focus Operating Range Connection to the S video-out terminal Connection to Monitor and ProjectorConnection to the analog RGB-out terminal Connection to the composite video-out terminalSimple Steps for Presenting Printed Material Operation ProceduresVarious Functions and Operation LightingZoom Mouse can be operated as follows Digital MagnificationColor / B&W Selection When Pause is effective, COLOR/B&W selection does not workImage Rotation Posi / Nega ConversionContrast PauseM. Frame Accumulate Mode Auto iris adjustmentIris Auto Focus FocusTo focus on specific part of the material, such as 3-D Power Manual FocusPreset Operation How to read out stored images Image MemoryUtility Software CD-ROM OSD Operation Pointer Posi/Nega To switch the selection ConversionSelection Emphasis of the image When power is turned ON, Main MenuIcon Name Function Reference Pages Status saving Is turned onFor the mouse pointer ON/OFF Sub Menu Page Ceiling Presenter side DSUB-9P RS-232C SpecificationsSetting Up Cable ConnectionConnection Transmission SpecificationsData Format Specifications Transmission command PC → Ceiling PresenterResponse data format Ceiling Presenter→ PC Uart Communication Format Function Location. Take care not to cause accident Replacement of the lamp requires a work done at a highReplacing the Lamp Replacing the LampSymptoms and Confirmation Troubleshooting HintsType B receptacle 11SPECIFICATIONSGeneral RCA pin jack/75 Ω unbalanced NTSC/PAL Video outputLighting CameraOptional parts to be purchased separately Supplied AccessoriesMemo Overseas Subsidiary Companies