Elmo HV-C1000XG Connection to Monitor and Projector, Connection to the analog RGB-out terminal

1

2

3

Connection to Monitor and Projector

The following settings of this product can be made with the DIP Switches. Make the settings according to the connection environment. The factory settings are as shown in the following table:

		Initial setting
Key	Function	Key selection	Content
A	To change the Video output type	1	NTSC
B	To change the screen size of Video output	0	Over scan

Be sure to turn OFF the power supply to all equipment before making any connections to protect this product and all the connected equipment.

4	When changing the DIP Switch keys, be sure to turn OFF the power supply to this product
	beforehand.
5	■ Connection to the analog RGB-out terminal
	Connect the Analog RGB-out Terminal [RGB OUT] to the equipment with an analog RGB-in
	terminal with the analog RGB cable (attached) or a connection cable available on the market.
	At this time, the position of the display may be deviated from the center. If deviated, manually
	adjust the horizontal and vertical positions on the connected equipment.
6	Also, vertical stripes may appear on the screen of the LCD projector. That can be alleviated
	by manually adjusting the dot clock frequency on the projector.

LCD projector

7

8

9

10

11

RS-232C	RGB OUT	AC IN POWER
		CRT monitor
MOUSE USB	VIDEO S-VIDEO	or

■Connection to the composite video-out terminal

Use the Composite Video-out Terminal [VIDEO](RCA pin) and the video cable with RCA pin plug as attached or available on the market.

RS-232C	RGB OUT	AC IN POWER	TV monitor
MOUSE USB	VIDEO S-VIDEO

■Connection to the S video-out terminal

Use the S Video-out Terminal [S-VIDEO](Mini DIN 4P) and the S-Video cable as attached or available on the market.

RS-232C	RGB OUT	AC IN POWER	TV monitor
MOUSE USB	VIDEO S-VIDEO

Hold the cable plug when connecting or disconnecting the cables.

15