Elmo HV-C1000XG instruction manual Preset Operation

Page 26

	1	Preset Operation
	1	Operation status of this product can be stored / read
		Operation status of this product can be stored / read
		out in the memory (max. 8 states can be stored).
	2	Operation states that can be stored are as shown
	2	below.
		• Present zoom angle of view
		• Status of IRIS
	3	• White Balance status
	3	• ON/OFF of Aperture

•Status of Gamma

•Lighting status

•Status of COLOR/B&W switch

4	• Condition including pointer ON/OFF, color and
	shape

		• Condition of IMAGE ROTATION
	5	• ON/OFF of CONTRAST mode
	5	• Status of POSI/NEGA conversion
		• Status of POSI/NEGA conversion
		• Status of F.A.M. selection
	6	1.	How to store
	6		Press the [PRESET.SET] button on the wireless
			Press the [PRESET.SET] button on the wireless
			remote control and press the MEMORY NO.
	7		button of the wireless remote control within 4 sec
	7		then the current status of this product is saved in
			the pressed number memory.

The preset (stored) status is maintained even when

8	the power is turned OFF.

2.How to read out operation status

Press the [PRESET.CALL] button on the wireless

9 remote control and press the MEMORY NO. button of the wireless remote control within 4 sec then this product is set to the memorized status

Wireless remote control

POWER

PAUSE

SET PRESET CALL

SET IMAGE CALL

POSI/NEGA COLOR/B&W CONTRAST LAMP

MENU	IMAGE ROTATION F.A.M.
TELE ZOOM WIDE	NEAR FOCUS FAR

NORMAL OPEN CLOSE AF

IRIS

Wireless remote control

SET PRESET CALL	SET IMAGE CALL
	CONTRAST LAMP

Reference Page

•OSD........ P.27

10

11

corresponding to the number.

25

Image 26

Contents HV-C1000XG Important Safeguards Wash hands after handling Should be moved with care. QuickRisk Electric Shock Do not Open Exclamation point within Before YOU USE Contents Replacing the Lamp Symptoms and ConfirmationUart Communication Format Part Names and Functions AppearanceTo connect the mouse supplied accessory*1 Connector PanelAnalog RGB-out Power Cord RS-232C Terminal RGB OUT ReceptacleACName Function Reference Wireless Remote ControlPower Supply Switch To turn ON/OFF the power supply To double the image size To switch pause/motion of the imageButton Name Function Reference Memory No. Used with 6 toPreparation Wireless Remote ControlReceivable Range Mouse Mouse OperationSetting of Auto Focus Operating Range InstallationInstallation of the Unit Connection to the composite video-out terminal Connection to Monitor and ProjectorConnection to the analog RGB-out terminal Connection to the S video-out terminalOperation Procedures Simple Steps for Presenting Printed MaterialZoom Various Functions and OperationLighting Digital Magnification Mouse can be operated as followsWhen Pause is effective, COLOR/B&W selection does not work Color / B&W SelectionPosi / Nega Conversion Image RotationPause ContrastIris M. Frame Accumulate ModeAuto iris adjustment Focus Auto FocusPower Manual Focus To focus on specific part of the material, such as 3-DPreset Operation Utility Software CD-ROM How to read out stored imagesImage Memory OSD Operation Main Menu Posi/Nega To switch the selection ConversionSelection Emphasis of the image When power is turned ON, PointerFor the mouse pointer ON/OFF Icon Name Function Reference Pages Status savingIs turned on Sub Menu Page Cable Connection RS-232C SpecificationsSetting Up Ceiling Presenter side DSUB-9PTransmission command PC → Ceiling Presenter Transmission SpecificationsData Format Specifications ConnectionResponse data format Ceiling Presenter→ PC Uart Communication Format Function Replacing the Lamp Replacement of the lamp requires a work done at a highReplacing the Lamp Location. Take care not to cause accidentTroubleshooting Hints Symptoms and ConfirmationRCA pin jack/75 Ω unbalanced NTSC/PAL Video output 11SPECIFICATIONSGeneral Type B receptacleCamera LightingSupplied Accessories Optional parts to be purchased separatelyMemo Overseas Subsidiary Companies