Elmo HV-C1000XG Image Memory, Utility Software CD-ROM, How to read out stored images

Page 27

Image Memory

Images can be stored / called in the memory of this product (max. 8 images).

1.Press the [IMAGE.SET] button on the wireless remote control and press the MEMORY NO. button of the wireless remote control within 4 sec then the image is stored in the pressed number.

When the Power Supply is turned OFF by pressing the [ P O W E R ] button of the wireless remote control, the images stored in the memory are deleted.

2.How to read out stored images

Press the [IMAGE.CALL] button on the wireless remote control and press the MEMORY NO. button of the wireless remote control within 4 sec then the image in the memory corresponding to the pressed number is read out.

Wireless remote control

POWER

PAUSE

SET PRESET CALL

SET IMAGE CALL

POSI/NEGA COLOR/B&W CONTRAST LAMP

MENU	IMAGE ROTATION F.A.M.
TELE ZOOM WIDE	NEAR FOCUS FAR

NORMAL OPEN CLOSE AF

IRIS

Wireless remote control

SET PRESET CALL

SET IMAGE CALL

POSI/NEGA COLOR/B&W

Reference Page

1

2

3

4

5

To return to the normal camera image, press the	•OSD........ P.27
[IMAGE.CALL] button again “within 4 seconds”.	•OSD........ P.27
The image cannot be saved in the number from
which the image is read.

"Utility Software CD-ROM"

The attached "Utility Software CD-ROM" contains the PC link software "Image Mate" and the TWAIN driver "ELMO TWAIN DS, "and can be operated as shown below.

•To transfer graphic data to PC.

•To operate this product by PC.

For details, see the Installation Manual for "Utility Software" and "manual.pdf" in the CD- ROM.

6

7

8

9

10

11

26

Image 27

Contents HV-C1000XG Important Safeguards Should be moved with care. Quick Wash hands after handlingRisk Electric Shock Do not Open Exclamation point within Before YOU USE Contents Symptoms and Confirmation Uart Communication FormatReplacing the Lamp Appearance Part Names and FunctionsRS-232C Terminal RGB OUT ReceptacleAC Connector PanelAnalog RGB-out Power Cord To connect the mouse supplied accessory*1Wireless Remote Control Power Supply Switch To turn ON/OFF the power supplyName Function Reference Memory No. Used with 6 to To switch pause/motion of the imageButton Name Function Reference To double the image sizeWireless Remote Control Receivable RangePreparation Mouse Operation MouseInstallation Installation of the UnitSetting of Auto Focus Operating Range Connection to the S video-out terminal Connection to Monitor and ProjectorConnection to the analog RGB-out terminal Connection to the composite video-out terminalSimple Steps for Presenting Printed Material Operation ProceduresVarious Functions and Operation LightingZoom Mouse can be operated as follows Digital MagnificationColor / B&W Selection When Pause is effective, COLOR/B&W selection does not workImage Rotation Posi / Nega ConversionContrast PauseM. Frame Accumulate Mode Auto iris adjustmentIris Auto Focus FocusTo focus on specific part of the material, such as 3-D Power Manual FocusPreset Operation How to read out stored images Image MemoryUtility Software CD-ROM OSD Operation Pointer Posi/Nega To switch the selection ConversionSelection Emphasis of the image When power is turned ON, Main MenuIcon Name Function Reference Pages Status saving Is turned onFor the mouse pointer ON/OFF Sub Menu Page Ceiling Presenter side DSUB-9P RS-232C SpecificationsSetting Up Cable ConnectionConnection Transmission SpecificationsData Format Specifications Transmission command PC → Ceiling PresenterResponse data format Ceiling Presenter→ PC Uart Communication Format Function Location. Take care not to cause accident Replacement of the lamp requires a work done at a highReplacing the Lamp Replacing the LampSymptoms and Confirmation Troubleshooting HintsType B receptacle 11SPECIFICATIONSGeneral RCA pin jack/75 Ω unbalanced NTSC/PAL Video outputLighting CameraOptional parts to be purchased separately Supplied AccessoriesMemo Overseas Subsidiary Companies