Elmo HV-C1000XG Connection, Transmission Specifications, Data Format Specifications

Page 34

1

2

3

Connection

If the RS-232C cable is not correctly connected between this product and the PC, no acknowledgement is transmitted. Connect the RS-232C cable correctly, and fix it firmly with the connector set screws before the operation.

Transmission Specifications

	• Full duplex start-stop sync. mode
	• Start bit	: 1 bit
4	• Data bit	: 8 bits
4	• Stop bit	: 1 bit
	• Parity bit	: None
	• X parameter	: None
5	• Baud rate (Communication speed)	: 9600bps
5

Data Format Specifications

6

This command is executed in the form of 1-command/1 packet. The next command is not accepted until the previous processing is completed.

•The communication command always starts with STX (Start of Text) , and ends with ETX

7	(End of Text) .

•If the communication format or command name is wrong, NAK (Negative Acknowledgement) will be sent from this product.

•When the communication format is correctly received, this product sends ACK (Normal

8 Acknowledgement).

■Transmission command (PC → Ceiling Presenter)

Each operation command is executed in ASCII code, and transmitted in a set of 7 bytes as

9 follows:

	S						E
	S	Command		Parameter	Data		E
(PC)	T	Command		Parameter	Data		T
10	X						X
	X						X

(Ceiling Presenter)	→ ACK
11

33

Image 34

Contents HV-C1000XG Important Safeguards Wash hands after handling Should be moved with care. QuickRisk Electric Shock Do not Open Exclamation point within Before YOU USE Contents Uart Communication Format Symptoms and ConfirmationReplacing the Lamp Part Names and Functions AppearanceTo connect the mouse supplied accessory*1 Connector PanelAnalog RGB-out Power Cord RS-232C Terminal RGB OUT ReceptacleACPower Supply Switch To turn ON/OFF the power supply Wireless Remote ControlName Function Reference To double the image size To switch pause/motion of the imageButton Name Function Reference Memory No. Used with 6 toReceivable Range Wireless Remote ControlPreparation Mouse Mouse OperationInstallation of the Unit InstallationSetting of Auto Focus Operating Range Connection to the composite video-out terminal Connection to Monitor and ProjectorConnection to the analog RGB-out terminal Connection to the S video-out terminalOperation Procedures Simple Steps for Presenting Printed MaterialLighting Various Functions and OperationZoom Digital Magnification Mouse can be operated as followsWhen Pause is effective, COLOR/B&W selection does not work Color / B&W SelectionPosi / Nega Conversion Image RotationPause ContrastAuto iris adjustment M. Frame Accumulate ModeIris Focus Auto FocusPower Manual Focus To focus on specific part of the material, such as 3-DPreset Operation Image Memory How to read out stored imagesUtility Software CD-ROM OSD Operation Main Menu Posi/Nega To switch the selection ConversionSelection Emphasis of the image When power is turned ON, PointerIs turned on Icon Name Function Reference Pages Status savingFor the mouse pointer ON/OFF Sub Menu Page Cable Connection RS-232C SpecificationsSetting Up Ceiling Presenter side DSUB-9PTransmission command PC → Ceiling Presenter Transmission SpecificationsData Format Specifications ConnectionResponse data format Ceiling Presenter→ PC Uart Communication Format Function Replacing the Lamp Replacement of the lamp requires a work done at a highReplacing the Lamp Location. Take care not to cause accidentTroubleshooting Hints Symptoms and ConfirmationRCA pin jack/75 Ω unbalanced NTSC/PAL Video output 11SPECIFICATIONSGeneral Type B receptacleCamera LightingSupplied Accessories Optional parts to be purchased separatelyMemo Overseas Subsidiary Companies