Elmo HV-C1000XG RS-232C Specifications, Setting Up, Cable Connection, PC side DSUB-9P

Page 33

8 RS-232C SPECIFICATIONS

This product can be controlled by a PC connected through the RS-232C terminal [RS-232C].

Setting Up

(1)Connect this product to a PC with an RS-232C connection cable.

When using an RS-232C cable available in the market, select a cable with the connection shown below.

To protect this product and the PC, be sure to turn OFF all the power supply of all equipment before connecting.

(2)Start the PC, and set the communication mode of the RS-232C to the communication mode of this product.

For the information how to set the communication mode of the RS-232C, refer to the instruction manual of the PC.

(3)Start the PC program to operate this product.

(4)Control through the RS-232C will start.

For communication control, be sure to take the above steps for setting.

1

2

3

4

5

6

7

Cable Connection

Ceiling Presenter side (DSUB-9P)

	DSUB-9P (Female)					CD	1
	5	4	3	2	1	RXD	2
	5	4	3	2	1	TXD	3
						TXD	3
						DTR	4
						SG	5
						DSR	6
	9		8	7	6	RTS	7
	9		8	7	6	CTS	8
						RI (CI)	9

PC side (DSUB-9P)

	1	CD	PC side :
			DSUB-9P (Female)
	2	RXD
			5	4	3	2	1
	3	TXD

4DTR

5SG

6DSR

7RTS

8	CTS	9 8 7 6
9	RI

8

9

10

11

32

Image 33

Contents HV-C1000XG Important Safeguards Should be moved with care. Quick Wash hands after handlingRisk Electric Shock Do not Open Exclamation point within Before YOU USE Contents Symptoms and Confirmation Uart Communication FormatReplacing the Lamp Appearance Part Names and FunctionsAnalog RGB-out Power Cord Connector PanelTo connect the mouse supplied accessory*1 RS-232C Terminal RGB OUT ReceptacleACWireless Remote Control Power Supply Switch To turn ON/OFF the power supplyName Function Reference Button Name Function Reference To switch pause/motion of the imageTo double the image size Memory No. Used with 6 toWireless Remote Control Receivable RangePreparation Mouse Operation MouseInstallation Installation of the UnitSetting of Auto Focus Operating Range Connection to the analog RGB-out terminal Connection to Monitor and ProjectorConnection to the composite video-out terminal Connection to the S video-out terminalSimple Steps for Presenting Printed Material Operation ProceduresVarious Functions and Operation LightingZoom Mouse can be operated as follows Digital MagnificationColor / B&W Selection When Pause is effective, COLOR/B&W selection does not workImage Rotation Posi / Nega ConversionContrast PauseM. Frame Accumulate Mode Auto iris adjustmentIris Auto Focus FocusTo focus on specific part of the material, such as 3-D Power Manual FocusPreset Operation How to read out stored images Image MemoryUtility Software CD-ROM OSD Operation Selection Emphasis of the image When power is turned ON, Posi/Nega To switch the selection ConversionMain Menu PointerIcon Name Function Reference Pages Status saving Is turned onFor the mouse pointer ON/OFF Sub Menu Page Setting Up RS-232C SpecificationsCable Connection Ceiling Presenter side DSUB-9PData Format Specifications Transmission SpecificationsTransmission command PC → Ceiling Presenter ConnectionResponse data format Ceiling Presenter→ PC Uart Communication Format Function Replacing the Lamp Replacement of the lamp requires a work done at a highReplacing the Lamp Location. Take care not to cause accidentSymptoms and Confirmation Troubleshooting HintsGeneral 11SPECIFICATIONSRCA pin jack/75 Ω unbalanced NTSC/PAL Video output Type B receptacleLighting CameraOptional parts to be purchased separately Supplied AccessoriesMemo Overseas Subsidiary Companies