Sharp PG-LW2000 appendix Using 3D Viewing Mode, Projecting 3D images, Ending 3D projection

Page 54

Viewing Stereoscopic 3D Images (Continued)

				Press 3D MODE on the remote
		6


Using 3D Viewing Mode				control to display the 3D MODE
Using 3D Viewing Mode				menu.

Use the following procedure to project 3D images.

For operation of the 3D LCD shutter glasses and the 3D-video playback equipment, see the corresponding operation manual.

ENTER button

O/Q buttons

Info

•If “An invalid button has been pressed.” is displayed, a 3D-compatible signal is not being input. Check the output signal on the playback equipment.

7 Press Q to set “DLP® Link™” to “On”.

8 Press ENTER to switch the mode and enable more natural 3D image viewing.

3D MODE button

Projecting 3D images

1 Turn the projector on.

2 Turn the 3D-video playback equipment on.

•Set the 3D-video playback equipment so that it outputs one of the signals listed in the Compatibility Chart in this operation

manual.

3 Switch the Input mode of the projector to enable input of 3D video signals.

4 Operate the 3D-video playback equipment and play back the 3D content.

5Turn the 3D LCD shutter glasses

on and place them over your eyes.

Warning!

•If the projector, 3D-video playback equipment, and 3D LCD shutter glasses are not properly set, you may experience eye strain in addition to not being able to view the images in 3D.

9 Press 3D MODE.

• The 3D MODE menu will disappear.

Note

•If the images are not displayed in 3D, repeat steps 6 to 8.

•You can also use “DLP® Link™” and “DLP® Link™ Invert” on the menu screen to change the 3D setting.

Ending 3D projection

1 Press 3D MODE on the remote control to display the 3D MODE menu.

2 Press O to set “DLP® Link™” to “Off”.

3 Press 3D MODE.

• The 3D MODE menu will disappear.

52

Image 54

Contents PG-LW2000 Model No Serial No See bottom of projector Void the users authority to operate this equipmentInformation Product Disposal Accessories Optional accessoriesContents Reference Viewing Stereoscopic 3D ImagesAccessories CleaningPower Sources Power-Cord ProtectionSafety Check Damage Requiring ServiceReplacement Parts OverloadingAvoid locations with extremes of temperature Rest your eyes occasionallyDo not block the exhaust and intake vents Using the projector in other countries Temperature monitor functionOther connected equipment Part Names and Functions 15 16Rear View Terminals Part Names and Functions Remote control signal transmitters Inserting the BatteriesUsable Range Setup and Projection Easy StartCorrecting trapezoidal distortion using Keystone Correction On the remote controlInput list Setting Up the Projector Setting Up the ProjectorVideo Setup Standard Setup Front ProjectionSignal Input Normal Mode Screen Size and Projection DistanceScreen Lens center Projection PRJ Mode Ceiling-Mount SetupConnecting the Projector to Other Equipment You may need other cables or connectors not listed belowConnecting the Projector to Other Equipment Connecting the Power Cord AC socket To AC outlet Power cord suppliedRS-232C Terminal D-sub 9 pin male connector Controlling the Projector by a ComputerPower indicator Lamp indicator Turning the Projector On/OffTurning the Projector On Press Enter to exit the Setup Guide screen About the Setup GuideAdjusting the Projected Image Adjusting the Focus Image ProjectionUse the rear adjustment foot to make the projector level Adjusting the HeightAdjusting the Picture Size Rotate the zoom ring to enlarge or shrink the picture sizeCorrecting Trapezoidal Distortion Press KeystoneSwitching the Input Mode Adjusting the VolumeVOL +/- Volume buttons Input buttons AV Mute button Buttons Resize Mode Press ResizeButton About Copyrights Using the Spot Function Operating with the Remote ControlDisplaying and Setting the Break Timer Switching the Eco+Quiet ModeFreezing a Moving Image Auto Sync Auto Sync AdjustmentSelecting the Picture Mode Displaying an Enlarged Portion of an ImageMenu Items Picture menuMain menu Projector adjustment PRJ-ADJ1/2 menu Press Menu Using the Menu ScreenMenu Selections Quick Start Menu ExampleMenu Selections Complete Menu Example Adjusting BrightQuick Start Menu Following items can be conﬁgured on the Quick Start MenuPress O or Q to adjust the item selected To adjust the projected image while watching itPress P or R and select Bright to adjust Press EnterPicture Adjustment Picture Menu Selecting the Picture ModeMenu operation n Adjusting the Colors Adjusting the ImageAdjusting the Color Temperature Adjusting Hue, Saturation, or ValueSelecting the Film Mode Eco+QuietReducing Image Noise DNR Signal Adjustment SIG-ADJ Menu Resolution SettingSignal Type Setting Checking the Input Signal Setting the Video SystemSetting the Video Setup When reproducing Ntsc signals in PAL video equipmentAdjusting the Image Position Adjusting the Projected Image SCR-ADJ MenuSetting the Resize Mode Keystone CorrectionClosed Caption Setting the OverscanSetting the On-screen Display For Americas onlyReversing/Inverting Projected Images Selecting the Setup GuideSelecting the Background Image Selecting the Wall ColorSpeaker Setting Auto Sync Auto Sync AdjustmentAuto Power Off Function Fan Mode SettingSystem Lock Function To cancel the keycode that you have already setWhen the System Lock is set Enter the same keycode in Re- conﬁrmTaking the Keylock Off Adjusting the Projector Function PRJ-ADJ1/2 MenuKeylock Function Select On, then press Enter Returning to the Default Settings Setting the Function Button Operation Standby Mode Selecting the Quick Start MenuPrecautions on Viewing Stereoscopic 3D Images Viewing Stereoscopic 3D ImagesShutter glasses control light signal Information on the 3D Projection FunctionAppendix Using 3D Viewing Mode Projecting 3D imagesEnding 3D projection Maintenance Cleaning the projectorMaintenance Indicators About the temperature warning indicatorAbnormally high Are high Lower than 95F +35ºC Regarding the Lamp LampReplacing the Lamp Removing and Installing the Lamp Unit Remove the lamp unit coverSTANDBY/ON button AC socket Resetting the Lamp Timer Communication conditions RS-232C Speciﬁcations and CommandsComputer control Basic formatCommands Computer ProjectorRGB PAL CC1 Compatibility Chart ComputerDTV Troubleshooting 19-2253, 54 Problem Check For Sharp Assistance Sharp Electronics FranceSpeciﬁcations Dimensions Units inches mmIndex

Related manuals

Manual 75 pages 35.4 Kb