Sharp PG-LW2000 Adjusting the Image, Adjusting the Color Temperature, Adjusting the Colors

Page 41

2 Adjusting the Image

Adjustment

O button

Q button

items

 

 

Contrast

For less

For more

 

contrast.

contrast.

Bright

For less

For more

 

brightness.

brightness.

Color*1

For less color

For more color

 

intensity.

intensity.

Tint*1

For making skin

For making skin

 

tones purplish.

tones greenish.

Sharp*1

For less

For more

 

sharpness.

sharpness.

Red*2

For weaker red.

For stronger

 

 

red.

Blue*2

For weaker

For stronger

 

blue.

blue.

BrilliantColor™*2 *3

For making the

For making the

 

effect weaker.

effect stronger.

*1 Not displayed in the RGB input mode.

*2 Not adjustable/selectable when selecting “sRGB”.

*3 BrilliantColor™ uses Texas Instruments' BrilliantColor™ technology. As the BrilliantColor™ level is increased, the image becomes brighter while the color reproduction is kept at a high level.

Note

•To reset all adjustment items, select “Reset” and press ENTER.

3 Adjusting the Color

Temperature

Selectable

Description

items

 

 

 

For lower color temperature for

–1

warmer, reddish incandescent-like

0

images.

 

 

 

 

 

 

 

1For higher color temperature for cooler, bluish, fl uorescent-like images.

Note

•Values on “CLR Temp” are only for general standard purposes.

Menu operation n Page 36

4 Adjusting the Colors

This function adjusts each of the six main colors that comprise the color wheel, altering their “Hue”, “Saturation”, or “Value”.

Selectable items

Description

C.M.S.-Hue

Sets the hue of the main colors.

 

 

C.M.S.-Saturation

Sets the saturation of the main

 

colors

C.M.S.-Value

Sets the brightness of the main

 

colors.

Reset

The adjustments of “Hue”,

 

“Saturation” and “Value” of all

 

colors are reset to the default

 

setting.

 

 

Return

Returns to the “Picture” menu

 

screen.

Adjusting “Hue”, “Saturation”, or “Value”.

1Select “On” for “C.M.S. Setting” in the “Picture” menu and then press ENTER.

2Select “C.M.S.” in the “Picture” menu and then press ENTER.

3Press P or R to select either “Hue”, “Saturation”, or “Value” and then press ENTER.

4Select the color to be adjusted with P or R and adjust it with O or Q.

Example of adjusting the “Hue”

Main colors

O button

Q button

 

 

 

R (Red)

Closer to magenta

Closer to yellow

 

 

 

Y (Yellow)

Closer to red

Closer to green

G (Green)

Closer to yellow

Closer to cyan

 

 

 

C (Cyan)

Closer to green

Closer to blue

B (Blue)

Closer to cyan

Closer to magenta

 

 

 

M (Magenta)

Closer to blue

Closer to red

•When “Saturation” is selected, the selected

color becomes

O: lighter. Q: thicker.

•When “Value” is selected, the selected color

becomes

O: darker. Q: brighter.

•To reset the adjustment values of each color to the default settings, select “Reset” and press

ENTER.

Features

Useful

39

Page 40 Page 42
Image 41
Page 40 Page 42
Contents PG-LW2000 Model No Serial No Void the users authority to operate this equipment See bottom of projectorInformation Product Disposal Optional accessories AccessoriesContents Viewing Stereoscopic 3D Images ReferencePower Sources CleaningAccessories Power-Cord ProtectionReplacement Parts Damage Requiring ServiceSafety Check OverloadingDo not block the exhaust and intake vents Avoid locations with extremes of temperatureRest your eyes occasionally Other connected equipment Using the projector in other countriesTemperature monitor function 15 16 Part Names and FunctionsRear View Terminals Part Names and Functions Usable Range Remote control signal transmittersInserting the Batteries Easy Start Setup and ProjectionInput list Correcting trapezoidal distortion using Keystone CorrectionOn the remote control Video Setup Setting Up the ProjectorSetting Up the Projector Standard Setup Front ProjectionScreen Lens center Signal Input Normal ModeScreen Size and Projection Distance Ceiling-Mount Setup Projection PRJ ModeYou may need other cables or connectors not listed below Connecting the Projector to Other EquipmentConnecting the Projector to Other Equipment AC socket To AC outlet Power cord supplied Connecting the Power CordControlling the Projector by a Computer RS-232C Terminal D-sub 9 pin male connectorTurning the Projector On Power indicator Lamp indicatorTurning the Projector On/Off Adjusting the Projected Image Adjusting the Focus About the Setup GuidePress Enter to exit the Setup Guide screen Image ProjectionAdjusting the Picture Size Adjusting the HeightUse the rear adjustment foot to make the projector level Rotate the zoom ring to enlarge or shrink the picture sizePress Keystone Correcting Trapezoidal DistortionVOL +/- Volume buttons Input buttons AV Mute button Buttons Switching the Input ModeAdjusting the Volume Button Resize ModePress Resize About Copyrights Displaying and Setting the Break Timer Operating with the Remote ControlUsing the Spot Function Switching the Eco+Quiet ModeSelecting the Picture Mode Auto Sync Auto Sync AdjustmentFreezing a Moving Image Displaying an Enlarged Portion of an ImagePicture menu Menu ItemsMain menu Projector adjustment PRJ-ADJ1/2 menu Menu Selections Quick Start Menu Using the Menu ScreenPress Menu Example Quick Start Menu Example Adjusting Bright Menu Selections Complete Menu Following items can be configured on the Quick Start MenuPress P or R and select Bright to adjust To adjust the projected image while watching itPress O or Q to adjust the item selected Press EnterMenu operation n Picture Adjustment Picture MenuSelecting the Picture Mode Adjusting the Color Temperature Adjusting the ImageAdjusting the Colors Adjusting Hue, Saturation, or ValueReducing Image Noise DNR Selecting the Film ModeEco+Quiet Signal Type Setting Signal Adjustment SIG-ADJ MenuResolution Setting Setting the Video Setup Setting the Video SystemChecking the Input Signal When reproducing Ntsc signals in PAL video equipmentSetting the Resize Mode Adjusting the Projected Image SCR-ADJ MenuAdjusting the Image Position Keystone CorrectionSetting the On-screen Display Setting the OverscanClosed Caption For Americas onlySelecting the Background Image Selecting the Setup GuideReversing/Inverting Projected Images Selecting the Wall ColorAuto Power Off Function Auto Sync Auto Sync AdjustmentSpeaker Setting Fan Mode SettingWhen the System Lock is set To cancel the keycode that you have already setSystem Lock Function Enter the same keycode in Re- confirmKeylock Function Adjusting the Projector Function PRJ-ADJ1/2 MenuTaking the Keylock Off Select On, then press EnterStandby Mode Setting the Function Button OperationReturning to the Default Settings Selecting the Quick Start MenuViewing Stereoscopic 3D Images Precautions on Viewing Stereoscopic 3D ImagesAppendix Shutter glasses control light signalInformation on the 3D Projection Function Ending 3D projection Using 3D Viewing ModeProjecting 3D images Cleaning the projector MaintenanceAbout the temperature warning indicator Maintenance IndicatorsAbnormally high Are high Lower than 95F +35ºC Replacing the Lamp Regarding the LampLamp STANDBY/ON button AC socket Removing and Installing the Lamp UnitRemove the lamp unit cover Resetting the Lamp Timer Computer control RS-232C Specifications and CommandsCommunication conditions Basic formatComputer Projector CommandsRGB PAL CC1 Computer Compatibility ChartDTV 19-22 Troubleshooting53, 54 Problem Check Sharp Electronics France For Sharp AssistanceSpecifications Units inches mm DimensionsIndex
Related manuals
Manual 75 pages 35.4 Kb
Top Page Image Contents