Sharp XV-Z3000U Setting up the Projector, Standard Setup Front Projection, Ceiling-mount Setup

Setting up the Projector

Setting up the Projector

For optimal image quality, position the projector perpendicular to the screen with the projector’s feet flat and level. Doing so will eliminate the need for Keystone correction and provide the best image quality.

Standard Setup (Front Projection)

■Place the projector at the required distance from the screen according to the desired picture size. (See page 20.)

Example of standard setup

Side View

H

Screen

Lens center

L

Note

•Refer to page 20 for additional information concerning “Picture (Screen) Size and Projection Dis- tance”.

Ceiling-mount Setup

■It is recommended that you use the optional Sharp ceiling-mount bracket for this installa- tion. Before mounting the projector, contact your nearest Authorized SharpVision Service Center or Dealer to obtain the recommended ceiling-mount bracket (sold separately).

•AN-XRCM30 ceiling-mount bracket (for U.S.A.).

•AN-60KT ceiling-mount bracket, its AN- TK201 and AN-TK202 extension tubes (for countries other than the U.S.A.).

■Invert the image by setting “Ceiling + Front” in “PRJ Mode”. See page 49 for use of this function.

18