Sharp XV-Z3000U Using the Options Menu, 2Adjusting the Overscan, 1Adjusting the Image Position

Using the “Options” Menu

	Options 1			INPUT 1
1	Image Shift	0
2	Overscan H	0
2	Overscan V	0
3	Subtitle	0
4	OSD Display		On
5	Video System		Auto
6	Signal Type		Auto
7	HDMI Setting		Standard
8	Background		Blue
9	Auto Power Off		On
0	Lamp Timer(Life)	0	h	100%

Settings on the Options 1 menu

Menu operation n Page 41

2Adjusting the Overscan

This function allows you to adjust the Overscan area ratio (display area ratio).

Orientation	O button	Q button
Overscan H	Reduces the	Enlarges the
(Horizontal)	image.	image.
	(The display	(The display area
Overscan V
	area ratio	ratio becomes
(Vertical)	becomes larger.)	smaller.)

1Adjusting the Image Position

You can move the projected image vertically.

Note

•This function can only be adjusted when a video, S-video, or Component signal is input.

•If the display area ratio is set too large, noise may appear at the screen edges. If this hap- pens, set the display area ratio to a smaller value.

•When “Resize” is set to “CINEMA ZOOM”, depending on the input signal, “Overscan V” may not be adjustable.

•Also read “About Copyrights” on page 37.

O button Q button

Note

•The Image Shift function cannot be selected when “Resize” is set to “DOT BY DOT”.

•You can also use the IMAGE SHIFT buttons on the remote control to adjust the image po- sition.

3Adjusting the Vertical Size of the Display (Subtitle Setting)

With this function, you can adjust the vertical size of the display to allow for subtitles.

O button	The image is compressed by adjusting
	the vertical size of the display.
Q button	The image is enlarged by adjusting the
	vertical size of the display.

Note

•When changing the screen with the Subtitle set- ting, not only the bottom of the screen rises, but also the upper part is changed to a certain point.

•The Subtitle setting can be adjusted more ef- fectively with the Overscan and Image Shift functions.

•The Subtitle setting only works when “Resize” is set to “CINEMA ZOOM”.

•The adjustment area changes according to the input signal.

Features Useful

47