Picture Adjustment Picture menu, Progressive

Picture Adjustment (“Picture” menu) (Continued)

3Adjusting the Color Temperature

Selectable		Description
items		Description
items

5500K	For lower color temperature for
6500K	warmer, reddish incandescent-like
7500K	images.	P
8500K		R
9300K		R
10500K	For higher color temperature for
	cooler, bluish, fluorescent-like images.

Note

•Values on “CLR Temp” are only for general standard purposes.

4Adjusting the Colors

Select “C.M.S.” (Color Management System) in the “Picture” menu and then press i ENTER.

This function adjusts each of the six main colors that comprise the color wheel, altering their “Hue”, “Saturation”, or “Value”.

Selectable items	Description

C.M.S.-Hue	Sets the hue of the main colors.

C.M.S.-Saturation	Sets the saturation of the main colors

C.M.S.-Value	Sets the brightness of the main colors.

Reset	The adjustments of “Hue”,
	“Saturation” and “Value” of all colors
	are reset to the default setting.

Menu operation n Page 41

•When “Saturation” is selected, the selected

color becomes

O: lighter. Q: thicker.

•When “Value” is selected, the selected color

becomes

O: darker. Q: brighter.

•To reset the adjustment values of each color to the default settings, select “Reset” and press i ENTER.

Info

•When a video signal, S-video signal, or compo- nent 480I/576I signal is input, set “Progressive” mode to “2D Progressive” and then adjust the colors.

5Progressive

	Selectable	Description
	items	Description
	items

	2D	Useful to display fast-moving images
	Progressive	such as sports.

	3D	Useful to display relatively slow-
	Progressive	moving images such as drama and
		documentary more clearly.
	Film Mode	Reproduces the image of film source*
		clearly. Displays the optimized image of
		film transformed with three-two pull down
		(NTSC and PAL60Hz) or two-two pull
		down (PAL50Hz and SECAM) enhance-
		ment to progressive mode images.

*The film source is a digital video recording with the original encoded as is at 24 frames/second. The projector can convert this film source to progres- sive video at 60 frames/second with NTSC and PAL60Hz or at 50 frames/second with PAL50Hz and SECAM to play back a high-definition image.

Adjusting “Hue”, “Saturation”, or “Value”.

1Press P or R to select either “Hue”, “Saturation”, or “Value” and then press i ENTER.

2Select the color to be adjusted with P or R and adjust it with O or Q.

Example of adjusting the “Hue”

Main colors	O button	Q button
R (Red)	Closer to magenta	Closer to yellow
Y (Yellow)	Closer to red	Closer to green
G (Green)	Closer to yellow	Closer to cyan
C (Cyan)	Closer to green	Closer to blue
B (Blue)	Closer to cyan	Closer to magenta
M (Magenta)	Closer to blue	Closer to red

Note

•In NTSC or PAL60Hz, even if the 3D Progres- sive mode has been set, the three-two pull down enhancement will be enabled automati- cally when the film source has been entered.

•When the image is blurred or noisy, switch to the optimal mode.

•When using progressive inputs, inputs are di- rectly displayed so that 2D Progressive, 3D Progressive and Film Mode cannot be selected.

Info

•The settings can be made either when INPUT3 or INPUT4 are selected or when INPUT1, 2, INPUT5, or INPUT6 are selected and the in- put signal is 480I or 576I.